The Benro A573TBS6PRO is a video tripod with the S6Pro fluid head, which provides balanced support for loads up to 13.2 lbs. and the A573T dual tube aluminum tripod, which offers efficient set-up and take-down workflow as well as stable support, you get an effective solution for professional applications.
Benro A573TBS6PRO Professional Video Tripod up to 6kg
BNR-A573TBS6PRO
The Benro A573TBS6PRO is a video tripod with the S6Pro fluid head, which provides balanced support for loads up to 13.2 lbs. and the A573T dual tube aluminum tripod, which offers efficient set-up and take-down workflow as well as stable support, you get an effective solution for professional applications.
€517.00
Tax excluded
625,57 €
Con IVA
- Delivery in 5 to 6 days
With the Benro S6Pro fluid head, which provides balanced support for loads up to 13.2 lbs, and the A573T dual tube aluminum tripod, which offers efficient mounting and dismounting workflow as well as stable support, you get an effective solution for professional applications with most cameras. The tripod incorporates a mid-level spreader and the head provides 5+0 steps of counterweight and continuous pan and tilt drag.
The S6Pro head has a flat base with a 3/8"-16 thread on the bottom, allowing the versatility of moving it from the tripod directly to other camera mounts, such as sliders. The tripod is designed with a 75mm hemisphere, but includes a half-ball adapter with a 3/8"-16 screw to incorporate the head. The tripod features rubber feet with two spikes on the bottom for use on virtually all surfaces.
Combined, the 2-stage Benro tripod and S6Pro head have a height range of 29.5 to 62". The tripod is made of aluminum and the head is made of magnesium and aluminum, including its knobs. The head comes with a pan bar that can be attached to either side. It also offers two 1/4"-20 threaded holes for attaching articulated arms and other accessories.
Benro S6Pro Fluid Video Head features
- Supports up to 13.2 lb
- 65mm flat base with 3/8 "-16 thread
- Compatible with 65mm flat base tripods and can be mounted directly to most gliders, jibs and monopods
- 5 + 0 counterweight steps
- Continuous dragging of horizontal and vertical movement
- Independent pan and tilt locks
- Tilt range of + 90 / -75 °
- 360 ° panoramic range
- Made of magnesium and aluminum
- Rosette adapters on the left and right side to hold the panoramic bar
- Sliding chamber plate with safety lock
- 1/4 "-20 and 3/8" -16 camera screws are included and can be stored in dedicated spaces on the top of the head, under the camera plate
- Two 1/4 "-20 threaded holes for accessories
Benro A573T Aluminium Tripod features
- 75mm hemisphere
- Includes a half ball adapter with a 3/8 "-16 screw
- Rubber feet with double spike
- Built-in mid-level extender
- Height range 29.5 to 62 "with head mounted
Data sheet
- Max. Payload
- From 6.6lb to 15.4lb
- Material
- Aluminum
Specifications
Camera plate
- Camera mounting screw: 1 x 1/4 "-20 Male and 1 x 3/8" -16 Male
- Safety lock: Yes
Head
- Base mounting: 3/8 "-16 Female
- Counterweight: Increment of 5 steps plus 0
- Hardware for panoramic handles: 2 x rosette
- Spirit level: 1 x illuminated
- Accessory mounting: 2 x 1/4 "-20 Female Thread
- Base diameter: 2.56 "/ 65 mm
Panoramic and Tilt
- Drag control: Pan: Continuous and Tilt: Continuous
- Drag type: Fluid
- Vertical tilt: + 90 ° to -75 °
- Pan range: 360 °
- Independent Pan Lock: Yes
- Independent Tilt Lock: Yes
Legs
- Lock type: Twist lock
- Sections: 3
- Leg characteristics: Rubber, Spikes
- Extender: Middle level (built-in)
General
- Load capacity: 13.2 lb / 5.99 kg
- Maximum height: 62 "/ 157.48 cm
- Minimum height: 29.5 "/ 74.93 cm
- Material: Aluminum, magnesium
- Weight: 10.3 lb / 4.67 kg
You might also like
