The Benro S6Pro Fluid Video Head A2573F Single Tube Aluminum Tripod is a versatile system that supports loads up to 13.2 lb. It has a compact design and features a 65mm flat base that allows the tripod head to be moved directly to sliders, jibs, and other support gear.
The S6Pro head offers 5 + 0 steps of counterweight and continuous PAN and TILT drag. It also has independent twist and tilt locks. The tilt range is + 90 / -75 ° and the pan range is 360 °.
Some parts of the head are made of magnesium and some of aluminum. Virtually the entire head, including the controls, is made of strong yet lightweight metal. A panoramic bar is included that can be attached to a rosette adapter on the left or right side of the head, for right- or left-handed users. A camera plate is included that can be adjusted forward / backward to allow you to find the optimal balance for your camera. A safety lock on the plate ensures that, once mounted, the plate will not come off if it is moved too far in either direction. Two camera screws (1/4 "-20 and 3/8" -16) are supplied and can be stored under the camera plate in the head itself, in dedicated slots. For attaching accessories, there is a 1/4 "-20 threaded hole on each side of the head that the articulated arms can be attached to.
The A2573F is a 2-stage, 3-section tripod with a flat base center column. With the head attached, the tripod reaches a maximum height of 71 " when the column is fully extended. With the column retracted, it reaches a maximum height of approximately 64". The minimum height is 17.5 ", a height that is not common for most tripods. At this height, you can set up the tripod for low-angle time-lapse shooting and other applications. Each tripod leg can be independently adjusted to three positions. The center column has a level adapter so you can adjust the position of the fluid head without having to adjust the tripod legs. The center column also has a bag weight hook sand and other loads you can hang from it for more stability.The A2573F tripod features rubber feet and spiked feet for use on virtually all types of terrain.
Features of fluid head S6Pro
- Supports a weight of 13.2lb
- 65mm flat base with 3/8 "-16 thread
- Compatible with 65mm flat base tripods and can be mounted directly to most gliders, jibs and monopods
- 5 + 0 counterweight steps
- Continuous dragging of horizontal and vertical movement
- Independent pan and tilt locks
- Tilt range of + 90 / -75 °
- 360 ° panoramic range
- Made of magnesium and aluminum
- Rosette adapters on the left and right side to hold the included pan rod
- Sliding chamber plate with safety lock
- 1/4 "-20 and 3/8" -16 camera screws are included and can be stored in dedicated spaces on the top of the head, under the camera plate
- Two 1/4 "-20 threaded holes for accessories
Features of A2573F Tripod
- 71 "maximum height with S6Pro attached and center column extended
- Low angle minimum height of 17.5 "
- Mono tube legs independently adjustable in three positions
- Leveling adapter at the end of the center column
- Spike and rubber feet
- Leg lock
- Aluminum construction
