Kiloview N40 enables video sharing up to 4Kp60 UHD resolution over an IP network via Full NDI. This small, portable encoder-decoder is ideal for mounting on a camera with HDMI output to connect to an NDI system.
It is a 4K HDMI to Full NDI encoder and decoder and features a 4K HDMI input and a 4K HDMI loop through for viewing on the monitor during NDI transmission, or HDMI output during decoding.
Features such as PoE, Tally Light, PTZ control, 3.5mm audio microphone input/output, multi-channel audio and intercom are available. The Kiloview N40 is undoubtedly the best choice for accessing the NDI environment.
Kiloview N40 enables video sharing up to 4Kp60 UHD resolution over an IP network via Full NDI. This small, portable encoder-decoder is ideal for mounting on a camera with HDMI output to connect to an NDI system.
It is a 4K HDMI to Full NDI encoder and decoder and features a 4K HDMI input and a 4K HDMI loop through for viewing on the monitor during NDI transmission, or HDMI output during decoding.
Features such as PoE, Tally Light, PTZ control, 3.5mm audio microphone input/output, multi-channel audio and intercom are available. The Kiloview N40 is undoubtedly the best choice for accessing the NDI environment.
Kiloview N40 is a bidirectional 4K encoder - decoder. It supports up to 4Kp60 video input (encoder) or 4Kp60 video output (decoder). This equipment brings your systems into the NDI environment.
The NDI protocol is a high-performance stream creator that allows any user to use real-time video with ultra-low latency in Video-IP networks.
HDMI 2.0 connections allow you to encode 4Kp60 video to Full NDI and loop through for monitoring or decode 4Kp60 to 4K HDMI. This equipment is perfect for ultra high quality (UHD) encoding and decoding.
This decoder encoder supports 3.5mm analogue audio microphone input/output or embedded audio. It also supports intercom via USB headset between devices directly or with the Kiloview Intercom Server.
With Kiloview's unique technology there is no delay when switching NDI output sources.
In decoder mode, you can preset the NDI sources from number 0 to 9. Connect a USB keyboard and select the output source with a single keystroke.
You can also connect a USB keyboard to control a PTZ camera.
|
Resolution |
4Kp60 | 4Kp30 | 1080p60 | 720p60 |
| Default Bit Rate | 250 Mbps | 200 Mbps | 125 Mbps | 90 Mbps |
Data sheet
