Kiloview N2 - Portable HDMI to NDI|HX wireless encoder

KLV-N2

The Kiloview N2 portable wireless HDMI to NDI video encoder allows FullHD video to be shared over an IP NDI network. The portable unit supports HDMI video up to 1080p60 and outputs over Wi-Fi or Ethernet, for use in streaming NDI workflows. It supports NDI|HX / RTMP / RTSP / SRT / HLS / TS over UDP streaming protocols and H.264/AVC/MJPEG compression, allowing it to work with a variety of platforms with very low latency.

The N2 encodes embedded audio in ACC or G.711 format and supports voice intercom. It has a TF/microSD card slot for recording video while streaming, or can be configured to record to a NAS via LAN. Recording formats include TS, MP4, MKV, AVI and MOV. It can be controlled and configured via Android app, via a web GUI or via an IMS remote management application.
  

Kiloview

€620.00
Available

Request a product query

Kiloview 

 

Share Full HD video over an NDI IP network with Kiloview N2 portable HDMI to NDI wireless video encoder. The portable unit inputs HDMI video up to 1080p60 and outputs the signal over Wi-Fi, or over Ethernet using the included USB expansion adapter, for use in your NDI video workflow. It supports NDI|HX, RTMP, RTSP, SRT, HLS, TS over UDP media streaming protocols, and H.264/AVC/MJPEG compression, allowing it to work with a wide variety of platforms with very low latency.

The N2 encodes embedded audio in ACC or G.711 format, and also supports voice intercom audio. It also features a TF/microSD card slot for recording video while streaming, or can be configured to record to a NAS over a LAN. Recording formats include TS, MP4, MKV, AVI and MOV. It can be controlled and configured via an Android app, via a web GUI, or via an IMS remote management application. A second USB port also allows the unit to be controlled via serial control using a separately available USB-to-serial adapter.

The unit is powered by its internal 6800mAh battery, so you can avoid wiring while in use. There are two mounting threads on the bottom and a hot shoe mount with removable hot shoe adapter is included for mounting on any standard hot shoe mount. Two RP-SMA Wi-Fi antennas are included to ensure signal strength and a power adapter for battery charging.

Data sheet

Video Inputs
HDMI
Outputs
IP
Escalador
si
Supported Resolutions
1280x720 - HD
1920x1080 - HD
Datos y Control
App IOS/Android
Ethernet
Grabador
Si
Soporte Grabación
Tarjeta SD
Codec / Ficheros
H264
MJPEG
Protocols
HLS
MPEG2-TS/UDP
NDI|HX
RTMP
SRT

Kiloview 

 

Specifications


Input

  • Video input connectors: 1 x HDMI female
  • Input video format: HDMI
  • 1080p: 23.98 / 24/25 / 29.97 / 30/50 / 59.94 / 60 fps
  • 1080i: 50 / 59.94 / 60 fps
  • 720p: 24/25 / 29.97 / 30/50 / 59.94 / 60 fps
  • Audio input connectors: None
  • Built-in audio input: HDMI


Output

  • Video output connectors: 1 x RJ45 (NDI / HX) Female
  • Video output format: Wireless / RJ45 / USB type A
  • 1080p: 23.98 / 24/25 / 29.97 / 30/50 / 59.94 / 60 fps
  • 1080i: 50 / 59.94 / 60 fps
  • 720p: 24/25 / 29.97 / 30/50 / 59.94 / 60 fps
  • Audio output connectors: None
  • Built-in audio output: RJ45 and wireless


Connectivity

  • HDMI Input Latency: 150 ms
  • Other I / O: 2 x USB type A LAN, control input / output
  • Expansion slots: None


Streaming IP

  • IP video encoding: H.264, MJPEG, MP4, NDI: 1920 x 1080 at 60p
  • IP audio encoding: AAC, G.711


Hardware

  • Memory card slots: 1 x microSD (type not specified)
  • Wi-Fi support: Yes
  • OS compatibility: Android


Power

  • Built-in battery: 6800 mAh
  • Power connector: 1 x Barrel input (12VDC at 1A)
  • Power consumption: Device: 3.7 V DC (6.5 W)


Environmental

  • Operating temperature: -4 to 113 ° F / -20 to 45 ° C


General

  • Dimensions: 4.5 x 3 x 1.4 "/ 115 x 75 x 35 mm
  • Weight: 13.4 oz / 380 g

You might also like

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password