Magewell 11514 ECO Capture Dual HDMI M.2 - 2K HDMI capture card

Avacab Official Dealer

Supported OS

Windows

• Windows 7/8/8.1/10/11/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64) and above

Linux (support x86, x64 & ARM architecture)

• Ubuntu 12.04/14.04/16.04/17.04/17.10/18.04 (x86 & x64)
• CentOS 6.5/7 (x86 & x64)
• Fedora 25/26/27 (x86 & x64)
• Red hat 6.5 and above (x86 & x64)
• Other Linux OS with kernel version 2.6.35 and above
      

Recommended OS (tested)

Windows

• Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2 DataCenter/Server 2016 R2 DataCenter (x86 & x64)

Linux

• Ubuntu 12.04/14.04/16.04 (x86 & x64)
  Ubuntu 17.04/17.10/18.04 (x64)
  CentOS 6.5/7.2 (x86 & x64)
  Fedora 25/26 (x64)
  Red hat 6.5 (x86 & x64)

Supported APIs

Windows

• DirectShow
  DirectKS
  Wave API/DirectSound/WASAPI

Linux

• V4L2
  ALSA

Supported Software

VLC
VirtualDub
OBS
XSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow/V4L2/AVCaptureSession encoding/streaming software

Input Interfaces

2x JST SHD 20-Pin socket (Part number: 11510)

• DVI 1.0
• HDMI 1.4a

2x FPC 20-Pin socket (Part number: 11514)

• DVI 1.0
  HDMI 1.4a
  
  

Host Interfaces

M.2 2280 Type M (PCIe Gen2 x4)
  

Input Features

Support for input video resolutions up to 2048x2160 pixels
   

HDMI Specific Features

165MHz HDMI receiver
Adaptive HDMI equalizer, the HDMI transmission distance can be up to 30 meters
Support for customized EDID
Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
Full colorimetry support
Support for 8/10/12-bit color depths
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support for up to 8-channel IEC60958/IEC61937 audio streams via SDK
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for extraction of Sony/Canon DSLR time code
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode

Video Capture Formats

Support for capture image resolutions up to 2048x2160 pixels
Support for capture frame rates up to 144fps (Actual capture frame rate can be limited by PCIe bandwidth. For the resolution of 1280x1024 and higher, the actual frame rate may be limited by the onboard video processing hardware pixel clock. For example, the maximum frame rate of 1920x1080 resolution can be up to 80fps.)
Support for 4:2:0 8-bit capture formats: NV12, I420, YV12
Support for 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY
Support for 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32
More capture formats are supported via SDK
  

Video Processing Features

Video processing pipelines with ~180Mpixels/s processing bandwidth
8-bit 4:4:4 video processing
Video scaling

Video de-interlacing

• Weave
• Blend top & bottom field

Video color format conversion

• Auto or manual selection of input color format & quantization range
• Auto or manual selection of capture color format, quantization range & saturation range
• Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
• Support for Limited or Full quantization range
• Support for Limited, Full & ‘Extended gamut’ saturation range

Video frame rate conversion

Multiple Cards per System

Support for multiple cards plugged to one system
On-board dip switch to set card number with 16 positions
System hardware device tree will display “01: Eco Capture Dual HDMI M.2” when dip switch is set to 0001, and so on
The video and audio device names displayed in your software will include the card number (set by the dip switch)
  

Multiple Capture Streams

Unlimited capture streams for any one input channel, but the capture streams should be in the same capture format.
  

Timestamp & A/V Synchronization

Hardware based 100ns high resolution clock
Audio frames (192 audio samples) & video frames are stamped with hardware clock
Hardware clock can be synchronized across cards (via SDK)
  

Video Capture SG-DMA

~700MB/s per channel DMA bandwidth in PCIe 2.x system
~400MB/s per channel DMA bandwidth in PCIe 1.x system
Support for auto detection of Intel tiled GPU surface
Support for DirectGMA for AMD video adapter chipsets
Support for GPUDirect for Nvidia video adapter chipsets
  

SDK

Magewell Capture SDK for DirectShow (Windows) or V4L2 (Linux) for easy integration
Magewell Capture SDK for DirectKS (Windows) or ioctl (Linux) for maximum flexibility & performance
  

Windows Driver Tweaks

All options can be controlled by three levels of registry key: global level, product level and device level
Video, Audio, Crossbar filter names can be customized via registry keys
  

Firmware Upgrade

Multiple cards in one system can be upgraded simultaneously
Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)
Safe upgrade. If power off or system break down occur when the firmware is being upgraded, it will automatically restore to the initial version. This function is only available for firmware version 1.21 and above.
  

LED Indicator

Status LEDs indicate the working state of each channel:
Pulsing slowly: idle
On: input signal locked
Off: input signal unlocked
Double blinks: memory failed or FPGA configuration failed
  

Form Factor

M.2 2280 standard size
  

Accessories

2 X SHD to HDMI type A cables (Part number: 11510)
2 X FPC ribbon cables (Part number: 11514)
2 X FPC to HDMI type A adapters (Part number: 11514)
  

Power Consumption

Max current at 3.3V: ~ 1.25 A
Max power consumption: ~ 4.17 W
  

Working Environment

Operating temperature: 0 to 40 deg C
Storage temperature: –20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing