CYP QU-2-4K22 HDMI2.0 1x2 Splitter

The CYP QU-2-4K22 splitter (distribution amplifier) accepts one HDMI input and distributes this signal to two identical outputs. This device supports 4K2K Ultra High Definition video with HDMI2.0 and HDCP2.2. In addition, it also supports 3D video signals and high definition audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio, with an audio sampling rate of up to 192 kHz.

When a combination of displays with different specifications and resolutions are connected, each output can automatically scale from 4K to 1080p or apply colour space conversion (from 4:4:4:4 to 4:2:0), as appropriate, based on the EDID requirements of each connected display. The CEC "active source" command can be activated to periodically reset the input selection on connected CEC-compatible displays. This unit is controlled by front panel switches with easy-to-read status LEDs.
 

CYP QU-2-4K22 HDMI Splitter features

• HDMI 2.0, HDCP 2.2 and DVI compatible
• HDMI 1 to 2 splitter
• Supports up to 4K2K UHD resolutions: 3840×2160@24/25/30/50/60Hz and 4096×2160 @24/25/30/60Hz
• Supports high definition audio pass-through: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, DTS 2/5.1CH, Dolby TrueHD, DTS-HD Master Audio and Dolby Atmos
• Supports system reset function (CEC active source command) which allows the unit to automatically reset the default HDMI input of the TV set
• HDMI input supports EDID settings for "Standard" and "TV" modes
• Input and output statuses are indicated on the front panel
• HDMI with HDR 6G (HDR10/Dolby Vision compatible), 3D and 4K@60Hz, DVI 1.0 compatible
• Support for current 10-bit and 12-bit HDR (High Dynamic Range) formats
• Automatic colour space conversion and downscaling from 4K to 1080p (from 4:4:4:4 to 4:2:0) for each independent output based on the EDID of each connected display
• Independent HDCP management engine for each output to ensure stable HDCP performance
• Front panel switch control