Blustream IP50HD-RX HD HDMI, Audio, Control and Data Receiver over IP

Avacab Oficial Dealer

 
 
 
 
 
The Blustream Contractor Series platform for HD video distribution enables the distribution of AV and control signals over a 100Mbps Ethernet network. The IP50HD-RX is an industry-leading HDMI 1080p video scaler receiver that uses H.265 lossless compression technology to deliver HDMI, bi-directional IR, RS-232 and USB/KVM over distances of 100m via a standard LAN network architecture.
 
The IP50HD-RX receiver can be powered via PoE from the network switch, or locally in case the switch does not support PoE. With multiple configuration options available, the Blustream HD Multicast solution is ideal for both commercial and residential installations.
 

Blustream IP50HD-RX HDMI over VoIP Receiver Features

• Advanced HD video, control and KVM over network infrastructure
• Extends HDMI over a distance of up to 100m (328ft) via a single CAT cable
• Supports unicast transmission in unmanaged networks
• Supports multicast transmission for large managed networks
• Built-in video scaler to allow inclusion of displays with different resolutions (1080p maximum)
• Supports up to 1080p video output at 60Hz
• Supports PCM 2.0 channel audio only
• Advanced signal management for independent IR, RS-232, USB/KVM and video/audio routing
• PoE (Power over Ethernet) for powering Blustream products from the PoE switcher
• HDCP1.4 compliant with advanced EDID management
• Analog audio L/R output
• 12V 1A local power supply in case the Ethernet switch does not support PoE (not included)
• 2 operating modes are available:
  
  • Matrix distribution (requires 100Mbps network switch)
  • One-to-one HDMI Extender (no network switch required)