Gefen EXT-DVI-FM500 - 2 LC fiber DVI extender
DVI extender over 2 single-mode or multimode fibers. LC connectors. Range 1,5km in SM and 450m in MM. Supports up to 1920x1200. Programmable EDID
DVI extender over 2 single mode or multimode fibers. The DVI fiber optic extender Gefen EXT-DVI-FM500 can extend a DVI signal up to 1.5km away. This extender is ideal for installations where the DVI source and display are separated from each other in an environment prone to electromagnetic interference. Two optical fibers with LC termination, provide maximum extension and excellent protection against EMI interference, as well as preserving signal integrity.
The automatic EDID programming function allows fast and correct synchronization of the video source with the display, without the need for manual configuration. This enables rapid image recovery when the display is turned on or when used in conjunction with switches or matrix.
Gefen EXT-DVI-FM500 2-Fiber DVI Extender features
- Extends DVI up to 1,500 meters (5,000 feet) using single-mode fiber cable (8/125 µm or 9/125 µm).
- Extends DVI up to 450 meters (1,500 feet) using multimode fiber cable (50 µm or 62.5 µm).
- Supports resolutions up to 1920 x 1200
- Supports DDWG standard for DVI-compatible monitors
- The EDID programming function allows a fast and correct synchronization of the source to show
- Fully compatible with DVI 1.0 and DDC2B via virtual DDC
- Supports both single-mode and multimode fiber optic cables.
- The fiber cable provides immunity against electromagnetic interference (EMI).
Data sheet
- Video Inputs
- DVI
- Outputs
- DVI
- Max. Video Resolution
- 1280x720 - HD
1920x1080 - HD - Max. VESA Resolution
- 800x600 - SVGA
1024x768 XGA
1280x768 - WXGA
1280x1024 - SXGA
1366x768 - WXGA
1400x1050 - SXGA+
1600x1200 - UXGA
1920x1200 - WUXGA - Power
- DC
- Range
- 1,5 Km
Maximum Pixel Clock | 165MHz |
Input Video Signal | 1.2V p-p |
Input DDC Signal | 5V p-p (TTL) |
Supported fiber types | single-mode 89µm (5000 feet) or multi-mode 50/62.5µm (1500 feet) |
Default EDID | UXGA (1600 x 1200) |
Video Input Connector (Sender) | (1) DVI-D (19 pin), male (digital only) |
Video Output Connector (Receiver) | (1) DVI-D (19 pin), male (digital only) |
Link Connectors (Sender / Receiver) | (2) Type LC (1 Duplex) fiber connectors |
LED Indicators (Sender / Receiver) | (1) EDID Status |
Program Button (Sender) | EDID Program (recessed) |
Fiber Cable | Duplex, LC-terminated, Single-Mode or Multi-Mode (OM1 (62.5/125µm), or OM2/OM3/OM3e/OM4 (50/125µm)) |
Power Supply (Receiver) | 5V DC (Second power supply included for use if source does not provide 5V power for Sender over DVI connector) |
Power Consumption | 2.5W (max.) |
Operating Temperature | 0°C - 50°C |
Storage Temperature | -10°C - 85°C |
Operating Humidity | 5% - 85% |
Dimensions (Sender / Receiver) | 1.5" W x 2.5" D x 0.5" H |
Shipping Weight | 2 lbs. |