 |
| Avacab Authorized Dealer |
Benro S6Pro Reverse Folding Carbon Fiber Travel Tripod with Fluid Video Head features a very compact travel tripod that can be converted to a monopod, and a compact fluid head with a 65mm flat base that allows the head to be moved directly to most sliders, jibs and other support equipment. The head supports loads up to 13.2 lbs and offers 5+0 counterweight steps. The tripod's carbon fiber design ensures better vibration absorption and greater resistance to saltwater corrosion, something to consider if photographing on the beach near water. Carbon fiber is also lighter than aluminum.
The tripod has a center column with a leveling adapter on the end that allows you to adjust the angle of the fluid head without having to readjust the tripod legs. The combination of the reverse folding design and the center column allows the tripod to have a maximum height of 72" (with the head mounted), while still being able to fold down to a very compact size. In addition, the tripod legs are able to extend widely to provide a minimum low angle height of only 13.4" (also with the head mounted). Thanks to its rubber feet and spikes underneath, the tripod can be used on virtually all surfaces. To convert it into a monopod, the center column is used as the main component. One of the tripod legs is unscrewed from the tripod and attached to the center column, and together they form a fully functional monopod.
The S6Pro head features continuous pan and tilt drag and has independent pan and tilt locks. The tilt range is a wide +90/-75°, and the pan range is a full 360°. Some parts of the head are made of magnesium and other parts of aluminum. Virtually the entire head, including its knobs, is made of robust yet lightweight metal.
A pan bar is included that can be attached to a rosette adapter on the left or right side of the head for left or right handed users. A camera plate is included that can be adjusted forward/backward to allow you to find the optimum balance for your camera. A safety lock on the plate ensures that once mounted, the plate will not slip if you move it too far in either direction. Two camera screws (1/4"-20 and 3/8"-16) are supplied and can be stored under the camera plate in the head itself, in dedicated slots. For attaching accessories, there is a 1/4"-20 threaded hole on each side of the head into which the articulating arms can be attached.
Fluid head S6Pro
- 13.2 pound payload
- 65mm flat base with 3/8 "-16 thread
- Can also be mounted directly to most gliders, jibs and monopods
- 5 + 0 counterweight steps
- Continuous dragging of horizontal and vertical movement
- Independent pan and tilt locks
- Tilt range of + 90 / -75 °
- 360 ° panning range
- Made of magnesium and aluminum
- Rosette adapters on the left and right side to hold the included pan rod
- Sliding chamber plate with safety lock
- 1/4 "-20 and 3/8" -16 camera screws are included and can be stored in dedicated spaces on the top of the head, under the camera plate
- Two 1/4 "-20 threaded holes for accessories
C3883 Tripod
- Reverse folding travel tripod with center column and leveling adapter
- Convertible into a monopod with one of the tripod legs unscrewed and fixed to the central column
- 72 "maximum height with S6Pro attached
- Low angle minimum height of 13.4 ".
- Spike and rubber legs
- Twist leg locks
- Made of carbon fiber
