The Kiloview E1 NDI, SDI to NDI encoder is designed to convert an SDI signal (video and audio) into a compressed H.264 signal using the NDI-HX IP protocol, NewTek's innovative technology for secure IP video transmission, and send it to compatible equipment using Ethernet as a medium. It is a robust device, designed for professional use, with 24x7 operation capability, where low latency video conversion (= 67) is required in environments with maximum resolution up to 1080p60. The E1 NDI converter supports video conversion to other protocols, such as RTMP / HLS / SRT / TS over UDP and recording to MicroSD card. The Kiloview E1 NDI includes analog audio input/output and is supplied with power supply (non-PoE converter).
The Kiloview E1 NDI, SDI to NDI encoder is designed to convert an SDI signal (video and audio) into a compressed H.264 signal using the NDI-HX IP protocol, NewTek's innovative technology for secure IP video transmission, and send it to compatible equipment using Ethernet as a medium. It is a robust device, designed for professional use, with 24x7 operation capability, where low latency video conversion (= 67) is required in environments with maximum resolution up to 1080p60. The E1 NDI converter supports video conversion to other protocols, such as RTMP / HLS / SRT / TS over UDP and recording to MicroSD card. The Kiloview E1 NDI includes analog audio input/output and is supplied with power supply (non-PoE converter).
The Kiloview E1 NDI allows FullHD video sharing over an NDI IP network. This small and portable device has 3G or HD-SDI video inputs up to 1080p60 and transmits the signal over Ethernet for use in any NDI workflow. It supports NDI / RTMP / HLS / SRT / TS transmission protocols, allowing it to work with a wide variety of platforms. The encoder supports SDI embedded audio and has 3.5mm analog audio input and output. It is compatible with 128 and 512 GB microSDXC cards (available separately). It also features SDI loop-through, for monitoring.
Data sheet
