Magewell Pro Convert HDMI Tx - HDMI to NDI converter


HDMI to NDI converter. Supports up to 2048x1200. NDI 3.x stream output. RS232 PTZ control and Tally signal transmission


En Stock

Request a product query



A signal converter that converts an HDMI signal with embedded audio to an NDI stream. It supports resolutions of up to 2048x1200 at 60p in both interfaces, input and output. The device can be powered via an included power adapter or via PoE using the NDI port. It has a 1/4"-20" thread for mounting the camera and can be used in studio or field thanks to its compact and robust design. There is also a shared PTZ+tally mini-DIN port for connecting tally lights or configuring NDI-based PTZ camera control. A counting light accessory is included. A complementary web interface allows the device name, font name and other parameters to be assigned.

Features of HDMI to NDI Converter Magewell Pro Convert HDMI TX

  • Convert HDMI signal to NDI Stream
  • Supported Embedded Audio
  • Up to 2048x1200 at 60p Input/Output
  • Power adapter + PoE
  • 1x BNC input
  • USB 2.0 for power and data transfer
  • 10/100/1000 Mbps Ethernet
  • Power interface - DC+5V
  • PTZ interface - Mini-DIN-8
  • NDI coding
  • Firmware upgradeable
  • LED Indicators
  • Tally



logo rohs

Data sheet

Video Inputs
Supported Resolutions
625i / 525i - SD
1280x720 - HD
1920x1080 - HD
2048x1080 - 2K
Entradas Audio
Data and Control



Supported Web Browser (tested)

  • Microsoft Internet Explorer 11
  • Microsoft Edge
  • Mozilla Firefox version 61 and above
  • Google Chrome version 49 and above
  • Apple Safari 11.1 and above
  • Opera 55.0.2994.44 and above

Supported Software (tested)

  • OBS
  • XSplit
  • vMix
  • VidBlasterX
  • Wirecast
  • streamstar SW
  • mimoLive
  • Any other NewTek NDI-enabled encoding or streaming software

Input Interface

  • HDMI
    • DVI-D 1.0
    • HDMI 1.4

Storage Interface

  • SD Card (functions to be developed)

PTZ + TALLY Control

  • Mini-DIN–8 jack

Mounting Hole

  • ¼–20 mounting hole

Network Interface

  • 10/100/1000Mbps Ethernet
  • IEEE 802.3af PoE

USB Interface

  • USB2.0 Type B
  • 5V/2.1A power supply

Input feature

  • Support input video resolutions at up to 2048x1200

HDMI Specific Features

  • 165MHz HDMI receiver
  • Adaptive HDMI equalizer support for cables lengths up to 30M
  • Support for customized EDID
  • Support for extraction of AVI/Audio InfoFrames
  • Full colorimetry support
  • Support up to 2048x1200 4:4:4/4:2:2 60fps input signals
  • Support 8 input and 2 output IEC60958 audio streams
  • Support for extraction of audio formation information & channel status data
  • Support for extraction of video timing information
  • Support for extraction of 3D format information
  • Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.

NDI® Output Format

  • Support for 4:2:2 8-bit output
  • Support for up to 2048x1200 60fps
  • Support for NDI 4.1

Video Processing Features

  • Video processing pipelines with 160 Mpixels/s
  • Video brightness, contrast, saturation, hue adjustment
  • Video de-interlacing
    • Top field only
    • Bottom field only
  • Video aspect ratio conversion
    • Auto or manual selection of output aspect ratio
  • Video color format conversion
    • Auto or manual selection of input color format & quantization range
    • Auto or manual selection of output color format, quantization range & saturation range
    • Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
    • Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
    • Support for Limited or Full quantization range
    • Support for Limited, Full & ‘Extended gamut’ saturation range
  • Video frame rate conversion
  • Video mirror flip

NDI® Source Name

  • Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’.
  • Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’.
  • Support for setting board-index, from 0 to F, through on-board rotary switch

Firmware Upgrade

  • Support for manual update using Web UI

LED Indicator

  • Status LEDs indicate:
    • Power supply indicator: on/off
    • Input signal indicator: locked/unlocked

Form Factor

  • 100.9smm (L) x 60.2mm (W) x 23.3mm (H)


  • USB 2.0 A to B Cable
  • 5V/2.1A power adaptor
  • Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)
  • Tally lights
  • L-bracket
  • LED matrix panel (optional)

Power Consumption

  • 5V max current: ~1.5A
  • Max power consumption: ~6W

Working Environment

  • Operating temperature: 0 to 45 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative Humidity: 5% to 90% non-condensing


close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password