Zhiyun MasterEye Controller VC100 Wireless monitor with Remote Control

The MasterEye VC100 monitors and controls your gimbal and camera with just one device by combining a wireless receiver with a high-definition touchscreen monitor, a handy focus wheel and various controls to let you direct your productions remotely. It allows control at a distance of up to 150 meters from the gimbal and monitor the image in real time, with a latency of only 60 milliseconds. It is also a recorder, and its autonomy reaches 8 hours. An indispensable tool to pair with any stabilizer compatible with a TransMount transmitter, such as the Weebill 2 or the Crane 3S.

Features of Zhiyun MasterEye Controller VC100

• Wireless receiver with integrated 5.5 inch LED touch screen and Full HD resolution (1920 x 1080 pixels). It is necessary to use a Zhiyun TransMount image transmitter to receive the signal.
• Capable of receiving image signal at a distance of up to 150 meters from the transmitter and with ultra-low latency of up to 60 milliseconds
• Allows remote control of camera and gimbal parameters. Includes focus and zoom wheels, control dial, joystick and several buttons to activate recording and control parameters (Tv, Av, EV, ISO and WB), plus two other configurable buttons.
• No delay. The MasterEye has an ultra-low latency of only 60 milliseconds so you can monitor the image in real time.
• 16:9 panel with a pixel density of 400 dots per inch and a luminance of 1,000 nits
• Output resolution: 1080p, 720p, 576p, and 480p, with frame rates of 60 fps, 59.94 fps, 50 fps, 30 fps, 29.97 fps, 25 fps, 24 fps, and 23.98 fps
• It also functions as a recorder, being possible to record the received image signal on a Class 10 or UHS-1 microSD card of up to 128 GB.
• It has an integrated 2,200mAh battery that provides an autonomy of up to 8 hours. Charging is done through the USB-C port.