Blackmagic Smart Videohub Control Pro - IP Matrix Control Panel

BMD-VHUB-WSC-PRO

The Blackmagic Design Smart Control Pro Videohub is a network switching matrix with 48 programmable buttons for routing sources and destinations. Smart Videohub is suitable for both large broadcast systems and for routing live productions, as it occupies only one rack unit.

Up to 10 buttons can be assigned to simultaneously activate multiple switching commands. It has 48 programmable buttons and RJ-45 connection for control of switching matrices via IP networks. Button settings and communication with the matrix are maintained and immediately restored when power is restored. It is also possible to save button settings for later use.

 

Blackmagic Design - Avacab official Blackmagic Design dealer - All Blackmagic Design products at Avacab
Avacab Oficial Reseller

€767.00 Tax excluded
928,07 € Con IVA
Quantity
En Stock

Blackmagic Design - Avacab official Blackmagic Design dealer - All Blackmagic Design products at Avacab
Avacab Oficial Reseller

 
 
 
 
 
 
   

The Blackmagic Design Smart Control Pro Videohub is a network switching matrix with 48 programmable buttons for routing sources and destinations. Smart Videohub is suitable for both large broadcast systems and for routing live productions, as it occupies only one rack unit.

Control panel for fast and easy signal distribution. Simply program each button for a single crossover point and press it when needed. It can also be configured for multiple target devices and is compatible with the "Take" function. This device is powered by the DC power supply or the Ethernet port.

The front buttons are configured to control the source and destination, as well as 10 assignable macro buttons and several configuration buttons. They can be programmed via USB using the included software. It also has power failure protection to preserve the configurations made.

The rear consists of an RJ45 Ethernet input with PoE to connect your sources and power the unit, which can also be powered with a C13 power cable. There is also a non-PoE Ethernet loop output for communicating with your destinations and two RS-422 input and output ports for future deployment, as well as a USB Type-C port for software configuration and firmware updates.


Features of Blackmagic control panel Smart Videohub Control Pro

 

  • Connections
    • Ethernet - RJ45 input and output. Possibility of powering the device via the Ethernet input, but not via the output.
    • RS-422 - Input and output (in next updates)
    • Computer interface - USB-C port for configuring and updating the device
    • Power supply - 100 - 240 AC
  • Computer support
    • Using the included application and program, via USB port or Ethernet network
    • Operating systems
      • Mac 10.13 High Sierra,
      • Mac 10.14 Mojave or later
      • Windows 10
  • Physical Installation - 1 U. Less than 3 inches deep.
  • Button Configuration - Free for Windows™ and Mac™ via high speed USB 2.0 interface (480 Mb/s)
  • Environmental Specifications
    • Storage Temperature -20 °C to 45 °C (-4 °F to 113 °F)
    • Relative humidity - 0 % to 90 % non-condensing
  • Physical characteristics
    • Dimensions (HxWxD) - 44.2mm x 482mm x 112.05mm
    • Weight - 1Kg


Logo-Garantia-2

Rohs_logo.gif

Data sheet

Data and Control
Ethernet
RS-422
USB
Power
AC
Comunes
Enracable
Rack Units
1 RU
Compatible
Blackmagic

You might also like

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password