Rode Broadcaster Large diaphragm condenser microphone

RDE-BROADCASTER

Condenser microphone with cardioid polar pattern and 20Hz - 20kHz, frequency response available with selectable 75Hz high-pass filter.

Logo_RODE_Prod

€350.00 Tax excluded
423,50 € Con IVA
Check Delivery Time
Quantity
Resérvala

Logo_RODE_Prod

  

END-ADDRESS BROADCAST CONDENSER MICROPHONE FOR VOCAL APPLICATIONS


The RODE BROADCASTER large diaphragm condenser microphone is designed to provide the best performance for vocal broadcast applications. Its personalized response, rich and full quality, has an accentuated proximity effect that has made it a standard in radio stations around the world. It is equally suitable as a voice-over microphone for film and television.

The Broadcaster features an internal pop filter, designed to minimize explosive sounds that can overload the microphone capsule and distort the audio output. In addition to the Transmitter's native 20Hz-20kHz response, a selectable 75Hz high-pass filter is available that will prevent low-end noise, such as air conditioners and traffic, from being recorded.

The Broadcaster features an innovative' On-Air' indicator on the body that can be connected for external activation via the' Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power. The RØDE Broadcaster microphone is designed and manufactured in Australia, and covered by the industry-leading RØDE Microphones industry leading 10 year warranty.

  

  

Features

  • 1 "HF2 capsule with gold-plated diaphragm
  • Air LED indicator
  • Ultra low noise
  • Voice adapted low-cut function
  • Internal pop filter
  • 10-year extended microphone registration warranty


Data sheet

Salidas Audio
Balanceado
Comunes
Phantom

Logo_RODE_Prod

  

Active Electronics

JFET impedance converter with bipolar output buffer

  

Capsule

1.00"

  

Polar Pattern

Cardioid

  

Address Type

End

  

Frequency Range

20Hz - 20kHz

  

Output Impedance

40Ω

  

Maximum SPL

128dBSPL

  

Maximum Output Level

2.0mV (@ 1kHz, 1% THD into 1KΩ load)

  

Sensitivity

-34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz

  

Equivalent Noise Level (A-weighted)

14dBA

  

Power Options

+24V phantom power+48V phantom power

  

Weight

577.00g

  

Dimensions

167.00mmH x 50.00mmW x 65.00mmD

  

Output

XLR Output

  

Warranty

1 year with free extension to 10 years following registration

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password