• On sale!
Benro BV10 Aluminum kit twin leg Tripod up to 10KG

Benro BV10 Aluminum kit twin leg Tripod up to 10KG

BNR-BV10

The Benro BV10 dual leg aluminum tripod kit is a complete tripod kit ideal for studio applications and for handling larger, fully mounted cameras weighing up to 22 pounds. The kit combines the BV10 100mm video head with a two-legged aluminum tripod.
   

Benro - Benro tripods for video cameras on Avacab Audiovisuales - All Benro products at Avacab
Authorized Dealer
€950.00 Tax excluded
1.149,50 € Con IVA
- Delivery in 5 to 6 days
Quantity
- Available

Benro - Benro tripods for video cameras on Avacab Audiovisuales - All Benro products at Avacab
Avacab Authorized Dealer

 
 
 
 
 
  
The Benro BV10 double leg aluminum tripod kit is a complete tripod kit ideal for studio applications and for handling larger, fully mounted cameras weighing up to 22 lbs. The kit combines the BV10 100mm video head with a two-legged aluminum tripod. The BV10 head features a 5-step counterbalance system to dial in the correct amount for your setup, and independent 4-step pan and tilt drag adjustments for precise control of camera movements. A Manfrotto 501/504PL compatible sliding quick release plate is provided. All main controls, apart from the counterweight, are located on the left side of the head, making it easy to make one-handed adjustments while operating the camera. For added versatility, the 100mm ball-tie bolt is removable to convert the head into a flat base for use on a slider or other support device.

The two-stage, three-section aluminum tripod incorporates a 100mm hemisphere and provides solid support for the BV10 head. It features oversized quick leg locks for easy and quick setup, an adjustable/removable mid-level extender and dual feet with spikes and removable rubber pads. The tripod kit extends to a maximum height of 64.4", while lowering to 29". A carrying bag and shoulder strap are included.
   

Features of head BV10

  • Supports up to 22 lbs
  • Removable tie bolt to convert it to a flat base head
  • 5-step counterweight (0 to 4)
  • Independent dragging of 4 steps (from 0 to 3) of horizontal and vertical movement
  • Tilt range from -65 ° to + 90 °
  • Slip plate compatible with Manfrotto 501 / 504PL
  • Two 3/8 "-16 accessory threads for mounting accessories, such as a monitor or recorder

Features of tripod

  • Two-legged aluminum tripod with 100mm hemisphere attachment
  • Height range 29 to 64.4 "(with head attached)
  • Oversized Swivel Lever Leg Clasps
  • Adjustable / removable mid-level spreader
  • Double-ended legs with removable rubber pads

 

Data sheet

Max. Payload
From 15.4lb to 26.4lb
Material
Aluminum

Logo_Benro_Lista
 

Specifications
 

Head

  • Load capacity: 22 lb / 10 kg
  • Head mount: 100mm
  • Counterweight: 5 steps (0 to 4)
  • Pan Drag: 4-step fluid cartridge (0 to 3)
  • Skew Drag: 4-step fluid cartridge (0 to 3)
  • Pan Range: 360 °
  • Tilt range: -65 ° to + 90 °
  • Quick release plate: QR13 (compatible with Manfrotto 501 / 504PL) and Screws for 1/4 "-20 and 3/8" -16 cameras
  • Accessory Mounting Threads: 2 x 3/8 "-16
      

Legs

  • Material: Aluminum
  • Legs: 2
  • Sections: 3
      

General

  • Minimum height: 29 "/ 73.6 cm
  • Maximum height: 64.4 "/ 163.5 cm, with an angle of the legs of 24 ° with the spine extended
  • Folded length: 34.6 "/ 88 cm
  • Weight: 22 lb / 10 kg

You might also like

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password