• On sale!

Kiloview D260 HD H.264/H.265 HDMI/3G-SDI 4K IP Video Multidecoder


The Kiloview D260 is a multi-interface IP Video decoder, compatible with most of the protocols used for video transmission over the network. It features 2 HDMI 2.0 ports and a 3G-SDI port, as well as a new LCD display that allows you to check the connection status at any time and adjust any parameter quickly.

Its dual Gigabit Ethernet port ensures professional processing and decoding of the IP Video stream, allowing you to add a backup internet connection, or add both ports for better utilisation of network bandwidth.

With improved decoding performance and sub-100ms latency, it allows you to preview up to 16 video streams, and select up to 4 of them to send to each of its three interfaces simultaneously, as individual outputs or as a multi-layer composition.
Authorized Distributor
€399.00 Tax excluded
482,79 € Con IVA
- Aprox. 6-8 days

Authorized Distributor


The Kiloview D260 decoder is a professional hardware decoder for decoding IP Video signals, supporting NDI|HX2.0, SRT, RTMP, RTMPS, HLS, TS over UDP, RTP and RTSP. This upgraded version of Kiloview's previous DC230 decoder is equipped with two HDMI 2.0 ports, one 3G-SDI port and two USB ports (one type A and one type C) that add maximum flexibility.

Its clear and easy-to-use graphical user interface makes it easy to preview up to 16 IP video streams. In addition, it allows multiple compositions of up to 4 layers. Once added in the configuration interface, any of these 16 IP video streams can therefore be played back as individual sources, combined in a composition or even the same signal on several of its ports simultaneously.
Interfaz gráfica de usuario Kiloview 

Powerful audio decoding

This Kiloview decoder supports a long list of supported audio formats, including AAC, MPEG-4, MPEG-2, G.711, Opus or LPCM. The D260 has a mini-jack audio output, and is capable of performing minor mastering functions in real time, such as switching a source on and off, modifying the mix gain, or configuring the various video outputs with different embedded audio mixes.

LCD display and touch buttons

The Kiloview D260 decoder is equipped with an LCD screen and touch buttons for an enhanced user experience. This small screen allows you to monitor connection status in real time, as well as keeping the IP address of the device always visible or allowing you to change settings without having to enter the graphical user interface.

Low latency and high quality

The Kiloview D260 guarantees exceptional picture quality while providing low IP video transmission latency, with a decoding delay of less than 100ms and an extremely low packet loss rate.

Intercom and Tally

By connecting a USB headset, the D260 decoder enables real-time end-to-end intercom with branded devices, provided that the Kiloview Intercom Server KIS (Kiloview Intercom Server) is implemented, which centralises up to 32 devices in its basic version, and unlimited devices in its Pro version.
In addition, this professional decoder is compatible with the Kiloview KA-TL1, the external Tally NDI indicator, ideal for productions in different locations where it is important to know when the encoded signal is in the programme.

Data sheet

Video Inputs
IP Video
Max. Video Resolution
1280x720 - HD
1920x1080 - HD
Salidas Audio
Data and Control
Kilolink Server
Recording Media
Codec / Ficheros
H.265 / HEVC
Authorized Distributor


Video Output2*HDMI
Audio OutputHDMI、SDI and 1*3.5mm Line out
Video FormatsH.264(AVC), Compatible with Baseline/Main/High Profile, up to Level 5.2;
H.265(HEVC)Compatible with Main Profile, up to Level 5.1
Video Decoding4 channels of H.264(AVC)/H.265(HEVC) video streams in resolution of 1080p60
Audio FormatsAAC/MPEG-4/MPEG-2/G.711/Opus/LPCM
Streaming protocolsNDI|HX2.0/NDI|HX3.0*/SRT/RTMP/RTMPS/HLS/TS over UDP/RTP/ RTSP
Display0.96”LCD Display and Touch Button
LayoutsCustom 1/2/3/4 layouts
Network ConnectionsEthernet Ports: 2*10/100M/1000M
USB Ports1*USB 2.0 Type-C
1*USB 2.0 Type-A
Power SupplyDC 12V/1A
ManagementWebUI/KiloLink Server
Power Consumption7W(MAX)
Size162.85mm x 104.00mm x 25.00mm
Operating Temperature-20℃~60℃

You might also like

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password