Panasonic AV-UHS500 Compact video mixer 12G-SDI and HDMI
A compact, high-performance 4K video production switcher for live events, it offers 8 12G-SDI video inputs as standard and incorporates virtually all the basic features of a large, high-end model, enabling 4K audiovisual productions with the same operational capability as HD. Its integrated housing is incredibly portable, making it ideal for all kinds of live events, and it supports various formats such as 4K/3G/HD and computer resolutions from XGA (1024 x 768, 60 Hz) to 4K (3840 x 2160, 60 Hz) via the 2 HDMI inputs.
The unit incorporates five keyers that allow a wide variety of programs to be run, including 2 channels of chroma and 2 channels of PinP. The switcher also has a signal scaling function, HDR/SDR conversion and an ITU-R BT.2020/BT.709 conversion function, providing the flexibility to select video output as required in environments where a variety of formats are used.
All this makes this equipment flexible enough to select the most convenient video output in environments where different formats are used. In addition, the mixer allows the installation of additional plug & play option cards to increase the number of inputs.
Features of 4K compact Live Switcher Panasonic AV-UHS500
- Compatible with multiple video formats up to 4K.
- Compatible with multiple 12G-SDI / 3G-SDI / HDMI interface.
- Compact and integrated body equipped with two slots for optional units.
- Inputs: SDI standard: 8 channels / 16 channels max * 1 , HDMI standard: 2 channels * 2/8 channels max * 1 .
- Outputs: SDI standard: 5 channels / 13CH * max 1 , 2 channels HDMI standard * 3 /8 channels max * 1 .
- 5 keys with 2 Chroma-key channels and 2 PinP channels.
- Support up / down conversion function, HDR / SDR conversion function and ITU-R BT.2020 / BT.709 conversion function.
- 4 AUX BUS channels, AUX 1 and 2 with a mix transition function and DSK 1 and 2 can be assigned.
- A remote camera controller function to control up to 16 * 1 integrated 4K / HD Panasonic cameras.
Data sheet
- Video Inputs
- HDMI
SDI - Outputs
- HDMI
SDI - Scaler
- si
- Max. Video Resolution
- 1280x720 - HD
1920x1080 - HD
2048x1080 - 2K
3840x2160 - UHD
4096x2160 - 4K DCI - Max. VESA Resolution
- 1024x768 XGA
1280x768 - WXGA
1280x1024 - SXGA
1600x1200 - UXGA
1920x1200 - WUXGA
3840x2400 - WQUXGA - Entradas Audio
- Embebido
- Salidas Audio
- Embebido
- Data and Control
- Ethernet
GPI
Local - Power
- AC
- Comunes
- Reference input
Tally
Specifications Live Switcher AV-UHS500
General
Power Supply | AC 100 V to 240 V, 50 Hz/60 Hz |
Current Consumption | 1.5 A |
Ambient Operating Temperature | 0°C to 40°C (32°F to 104°F) |
Ambient Operating Humidity | 10% to 90% (no condensation) |
Storage Temperature | 0°C to 40°C (32°F to 104°F) |
Storage Humidity | 10% to 90% (no condensation) |
Weight | Approx. 7 kg ( Approx.15.4 lb) |
Dimensions (W x H x D) | 440 mm x 170 mm x 360 mm (17-5/16 inches x 6-11/16 inches x 14-3/16 inches) (excluding protrusions) |
Video Terminal
SDI IN 1 to SDI IN 8 Terminals | 8 lines (plus another maximum of 8 lines when using the OPTION unit) • Connectors: BNC x 8 • Color space conversion function • Frame synchronizer function • Connectors <SDI IN 1> to <SDI IN 4> equipped with simple format converters. • Connectors <SDI IN 5> to <SDI IN 8> equipped with up-converters. • Connectors <SDI IN 5> to <SDI IN 8> equipped with color correctors. * SDI IN 1/2 excludes HDMI IN 1/2. | |
12G-SDI | 12G-SDI, SMPTE ST 2082-10 standard complied with | |
3G-SDI | 3G-SDI, SMPTE292 standard complied with (Compatible with Level-A/Level-B) | |
HD-SDI | HD-SDI, SMPTE292M standard complied with | |
HDMI IN 1 to HDMI IN 2 Terminals | 2 lines (plus another maximum of 6 lines when using the OPTION unit) Video format inputs: 720p/59.94 Hz, 720p/50 Hz, 1080i/59.94 Hz, 1080i/50 Hz, 1080p/59.94 Hz, 1080p/50 Hz, 1080p/29.97 Hz, 1080p/25 Hz, 1080p/24 Hz, 1080p/23.98 Hz, 2160p/59.94 Hz, 2160p/50 Hz, 2160p/29.97 Hz, 2160p/25 Hz, 2160p/24 Hz, 2160p/23.98 Hz PC format inputs: 4K (3840 x 2160, 60 Hz), WQHD (2560 x 1440, 60 Hz), WUXGA (1920 x 1200, 60 Hz), UXGA (1600 x 1200, 60 Hz), WSXGA+ (1680 x 1050, 60 Hz), SXGA (1280 x 1024, 60 Hz), WXGA (1280 x 768, 60 Hz), XGA (1024 x 768, 60 Hz) Mode: Full/Fit-H/Fit-V • Scaler, Frame synchronizer and Color space conversion function • Connectors: HDMI x 2 • This connector does not support the CPRM technologies. * HDMI IN 1/2 excludes SDI IN 1/2. | |
SDI OUT 1 to SDI OUT 5 Terminals | 5 lines (plus another maximum of 8 lines when using the OPTION unit) • Connectors: BNC x 5 • Down-converter to 1080p, Color space conversion function • PGM, PVW, CLN, ME PGM, MV1 to MV2, AUX1 to AUX4, Key Out can be assigned. | |
12G-SDI | 12G-SDI, SMPTE ST 2082-10 standard complied with | |
3G-SDI | 3G-SDI, SMPTE292 standard complied with (Compatible with Level-A) | |
HD-SDI | HD-SDI, SMPTE292M standard complied with | |
HDMI OUT 1 to HDMI OUT 2 Terminals | 2 lines (plus another maximum of 6 lines when using the OPTION unit) • Connectors: HDMI x 2 • Down-converter to 1080p • Color space conversion function • PGM, PVW, CLN, ME PGM, MV1 to MV2, AUX1 to AUX4, Key Out can be assigned. | |
Signal Formats | 2160/59.94p, 50p, 29.97p, 25p, 24p, 23.98p, 1080/59.94p, 50p, 29.97p, 29.97PsF, 25p, 25PsF, 24p, 24PsF, 23.98p, 23.98PsF, 59.94i, 50i 720/59.94p, 50p | |
Signal Processing | R: G: B 4: 4: 4 8 bit / 4: 2: 2 10 bit (Only for HDMI) | |
Y: CB: CR 4: 2: 2 10 bit | ||
ME Number | 1ME |
Synchronous Terminal
REF Terminal Reference Input/ BB Outputs | In Genlock mode: Black burst or Tri-level Sync input signals (with loop-through) • Loop-through output is performed in external sync mode. • If loop-through output is not going to be used, provide a 75 Ω termination. • Connectors : BNC x 2 • Same field frequencies as those of the system formats supported. • With the 24.00p format, Black Burst input signal is not supported. • With the 1080/23.98PsF format, black burst with 10 Field ID (SMPTE318M standard met) or Trilevel Sync signals supported. • BB signals are output from two connectors in the internal sync mode. | |
Video Delay Time | 1 line (H) | When the frame synchronizer setting is [Off] and neither the up-converter nor the down-converter is operating |
1 frame (F) | When the frame synchronizer setting is [On] and the up-converter and downconverter are operating | |
• When the signals have passed through PinP, DVE, multi view, down- converter or HDMI IN, a maximum delay of 1 frame is applied in each case. |
Control Terminal
LAN Terminal | Compatible with 1000BASE-TX and AUTO-MDIX (For IP control) • Connecting cable: LAN cable (CAT5E), max. 100 m (328 ft), STP (Shielded Twisted Pair) cable recommended • Connectors : RJ-45 |
TALLY GPI Terminal | INPUT: 8 inputs general-purpose, photocoupler sensing OUTPUT: 19 outputs; selected from R/G tally, general-purpose ALARM: 1 output, open collector output (negative logic) |
OPTION Unit
General
AV-UHS5M1G | AV-UHS5M2G | AV-UHS5M3G | AV-UHS5M4G | AV-UHS5M5G | |
Power Supply | DC 12 V Supplied by AV-UHS500 | ||||
Power Consumption | 15 W 1.2 A | 16 W 1.3 A | 14 W 1.1 A | ||
Ambient Operating Temperature | 0°C to 40°C (32°F to 104°F) | ||||
Ambient Operating Humidity | 10% to 90% (no condensation) | ||||
Storage Temperature | 0°C to 40°C (32°F to 104°F) | ||||
Storage Humidity | 10% to 90% (no condensation) | ||||
Weight | Approx. 371 g (Approx. 0.82 lbs.) | Approx. 353 g (Approx. 0.78 lbs.) | Approx. 354 g (Approx. 0.78 lbs.) | ||
Dimensions (W x H x D) | 112 mm x 42 mm x 167 mm (4-13/32 inches x 1-21/32 inches x 6-9/16 inches) (excluding protrusions) | 112 mm x 42 mm x 166 mm (4-13/32 inches x 1-21/32 inches x 6-17/32 inches) (excluding protrusions) |
SDI Input Unit AV-UHS5M1G
SDI IN 1 to SDI IN 4 Terminals | 4 lines • Connectors: BNC x 4 • Frame synchronizer function • Up-converter fitted. • Color space conversion function • Color corrector fitted. | |
12G-SDI | 12G Serial digital, SMPTE ST 2082-10 standard complied with • 0.8 V [p-p] ± 10% (75 Ω) • Automatic equalizer 80 m (when the cable is used) | |
3G-SDI | 3G Serial digital, SMPTE292 standard complied with (Level-A/Level-B) • 0.8 V [p-p] ± 10% (75 Ω) • Automatic equalizer 100 m (when the cable is used) | |
HD-SDI | HD Serial digital, SMPTE292M standard complied with • 0.8 V [p-p] ± 10% (75 Ω) • Automatic equalizer 100 m (when the cable is used) |
SDI Output Unit AV-UHS5M2G
SDI OUT 1 to | 4 lines | |
SDI OUT 4 | • Connectors: BNC x 4 | |
Terminals | • Down-converter | |
• Color space conversion function | ||
• PGM, PVW, CLN, ME PGM, MV1 to MV2, AUX1 to AUX4, Key Out can be assigned. | ||
12G-SDI | 12G Serial digital, SMPTE ST 2082-10 standard complied with 0.8 V [p-p] ± 10% (75 Ω) | |
3G-SDI | 3G Serial digital, SMPTE292 standard complied with (Level-A) 0.8 V [p-p] ± 10% (75 Ω) | |
HD-SDI | HD Serial digital, SMPTE292M standard complied with 0.8 V [p-p] ± 10% (75 Ω) |
HDMI Input Unit AV-UHS5M3G
HDMI IN 1 to | 3 lines |
HDMI IN 3 | Video format inputs: 720p/59.94 Hz, 720p/50 Hz, 1080i/59.94 Hz, |
Terminals | 1080i/50 Hz, 1080p/59.94 Hz, 1080p/50 Hz, 1080p/29.97 Hz, 1080p/25 Hz, |
1080p/24 Hz, 1080p/23.98 Hz, 2160p/59.94 Hz, 2160p/50 Hz, | |
2160p/29.97 Hz, 2160p/25 Hz, 2160p/24 Hz, 2160p/23.98 Hz | |
PC format inputs: 4K (3840 x 2160, 60 Hz), WQHD (2560 x 1440, 60 Hz), | |
WUXGA (1920 x 1200, 60 Hz), UXGA (1600 x 1200, 60 Hz), | |
WSXGA+ (1680 x 1050, 60 Hz), SXGA (1280 x 1024, 60 Hz), | |
WXGA (1280 x 768, 60 Hz), XGA (1024 x 768, 60 Hz) | |
Mode: Full/Fit-H/Fit-V | |
• Connectors: HDMI x 3 | |
• Frame synchronizer function | |
• Color corrector fitted. | |
• Scaler and Color space conversion function | |
• This connector does not support the CPRM technologies. |
HDMI Output Unit AV-UHS5M4G
HDMI OUT 1 to | 3 lines |
HDMI OUT 3 | Mode: Fit-V, Fit-H, Full, Full-90%, Full-80% |
Terminals | Size: Auto, WQHD (2560 x 1440, 60 Hz), WUXGA (1920 x 1200, 60 Hz), |
UXGA (1600 x 1200, 60 Hz), WSXGA+ (1680 x 1050, 60 Hz), SXGA (1280 x 1024, 60 Hz), | |
WXGA (1280 x 768, 60 Hz), XGA (1024 x 768, 60 Hz), Native | |
Color: Auto, RGB, YUV444, YUV422 | |
• Connectors: HDMI x 3 | |
• PGM, PVW, CLN, ME PGM, MV1 to MV2, AUX1 to AUX4, Key Out can be assigned. | |
• Scaler and Color space conversion function |