- Out-of-Stock
Active direct injection box. Battery operated or 48V phantom powered. Active electronics allow high input impedance
Palmer PAN02 - Active direct injection box
PAL-PAN02
Active direct injection box. Battery operated or 48V phantom powered. Active electronics allow high input impedance
€55.00
Tax excluded
66,55 €
Con IVA
Active direct injection box . It can be powered by batteries or 48V phantom power. Active electronics allow for high input impedance and sensitivity. The maximum output impedance with phantom power is + 10dBu. Transformer balanced output. The special “floating ground” circuit allows you to use the Ground-Lift switch (to disconnect the ground from the system) even when operating on phantom power.
Features of the Palmer PAN02 Active Direct Injection Box
- Product type: DI box
- Type: Active
- Channels: 1
- Entries: 1
- Input connectors: 6.3 mm jack
- Max. input: + 45 dBu
- Input impedance: (at) 60 Hz) 1 M Ohm (s)
- Input attenuation: 0 / -30 dB
- Number of outputs: 1
- Number of THRU outputs per channel: 1
- Output connectors: XLR, 6.3 mm Jack
- Max. output: + 10 dB
- Output impedance: 600 Ohm (s)
- Frequency response: 10 - 20000 Hz
- Transformer balanced: Yes
- Ratio: 10: 1
- Controls: Ground-Lift, Attenuator
- Power supply: 9 V block battery, +48 V phantom power
- Current consumption: 4 mA (48V), 3.8 mA (9V)
- Case material: Steel
- Surface of the box: textured
- Width: 110 mm
- Depth: 73 mm
- Height: 42 mm
- Weight: 0.358 kg
