Blustream DA11ADE Dante to Analogue Audio Decoder
BLS-DA11ADE
The Blustream DA11ADE is designed to decode a digital audio over IP signal under Dante protocol and convert it into balanced or unbalanced 2-channel analogue audio. The DA11ADE is a Plug&Play device that is powered by PoE (Power over Ethernet) from any network switch with PoE or by a local 12V power input (optional power supply).
The Blustream DA11ADE also supports AES67 RTP audio transport and has independent gain per channel to adjust audio sensitivity as required.
€225.00
Tax excluded
272,25 €
Con IVA
The Blustream DA11ADE is designed to decode a digital audio over IP signal under Dante protocol and convert it into balanced or unbalanced 2-channel analogue audio. The DA11ADE is a Plug&Play device that is powered by PoE (Power over Ethernet) from any network switch with PoE or by a local 12V power input (optional power supply).
The Blustream DA11ADE also supports AES67 RTP audio transport and has independent gain per channel to adjust audio sensitivity as required.
Blustream DA11ADE Dante Decoder features
- Decodes a Dante® digital signal to unbalanced or balanced 2ch analogue audio
- Supports 44.1, 48 & 96 KHz sample rates @ 24 Bit
- Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)
- Independent output gain control per channel: +18dBu to -10dBV
- Supports AES67 RTP audio transport
- Features Class 1 802.3af PoE for powering of product from any PoE switch
Data sheet
- Protocols
- AES67
Dante - Entradas Audio
- Dante
- Salidas Audio
- Balanceado
No Balanceado - Power
- DC
PoE