LEN L3GS01 - 1x2 passive 3G-SDI splitter
1x2 3G-SDI Passive Splitter. No power required. Ideal to double critical signals or for its use in reduced space environments
LEN 3G passive Splitter is suitable for additional monitor feeds; remote camera locations and situations where size and weight are critical factors.
Each is built into an ABS enclosure fitted with three female BNC connectors.
Features
- Miniature passive Splitter – no power required
- Broadcast quality signal up to 3 GHz
- Size 45x30x15mm – weight less than 30 gm
- Ideal for permanent and temporary installations
Description / Details
Two (or more) 3G Splitters can be used in series to provide up to 8 individual feeds over shorter distances. The actual distance depends on original signal strength and cable type.
Further Notes
To guarentee the specified performance the input should be fed with a source impedance of 75 ohms and both outputs should be terminated with 75 ohms. Therefore, if an output cable is not present, a 75 ohm termination should be fitted. This should be specified to operate over the full SDI bandwidth in use.
However, typical feedback from End Users is that not terminating an unused output does not cause significant reduction in performance.
Data sheet
- Video Inputs
- SDI
- Outputs
- SDI
- Max. Video Resolution
- 625i / 525i - SD
1280x720 - HD
1920x1080 - HD