- Out-of-Stock
Broadcast frame synchronizer in openGear format. Supports non-synchronous 3G-SDI, HD and SD. Affordable Up-Down-Cross Conversion.
AJA OG-FS-Mini - Frame Synchronizer with Dashboard Support
AJA-OG-FS-Mini
Broadcast frame synchronizer in openGear format. Supports non-synchronous 3G-SDI, HD and SD. Affordable Up-Down-Cross Conversion.
€1,012.00
Tax excluded
1.224,52 €
Con IVA
Broadcast quality frame synchronizer in openGear format, which combines the proven reliability of AJA's FS synchronization technology on an openGear card. It supports frame synchronization of 3G-SDI, HD and SD non-synchronous video signals at an affordable price.
The AJA OG-FS-Mini allows users to synchronize and convert a wide range of video formats to their internal standard, with a 3G-SDI input and output, HDMI output and two 3-pin terminal block connectors for balanced analog audio outputs. The OG-FS-Mini also provides high quality up-conversion, down-conversion and cross-conversion.
It is designed to be used in high density 2RU openGear chassis, including AJA's OG-X-FR chassis. DashBoard software is supported on Windows®, macOS® and Linux offering remote control and monitoring of the openGear architecture and providing convenient, industry-standard configuration, monitoring and control options via a PC or local network.
Features
- openGear compatible card
- The frame synchronization function generates output signals locked to an external reference.
- Supports Two and Three Level References
- High-quality 10-bit video processing
- Low latency processing, 1 frame video rated delay.
- Freeze (in case of loss of input signal) to a black image or to the last good image.
- Supports 1080p, 1080i, 720p, 625i, 525i and SDI input signals.
- Simultaneous SDI and HDMI Outputs
- 16 Channel Embedded SDI Audio I/O
- 8-channel HDMI audio output
- 2x 3-pin connectors for analog audio output
- Frame rate conversion, compatible with 3:2 pulldown
- Up, down and cross conversion between 3G, HD and SD video formats
- AFD input detection, down-conversion control
- Remote configuration via Ross DashBoard software
- Rear I/O card included
- Compatible with openGear OG-X-FR, OG3 and DFR-8321 frames
- Five-year warranty
NOTE: OG-FS-Mini only converts 3G-SDI Level A formats. It does not allow 3G-SDI Level B input or output.
Data sheet
- Video Inputs
- SDI
- Outputs
- HDMI
SDI - Scaler
- si
- Max. Video Resolution
- 625i / 525i - SD
1280x720 - HD
1920x1080 - HD - Entradas Audio
- Embebido
- Salidas Audio
- Embebido
- Data and Control
- Ethernet
Local - Comunes
- Frame synchronizer
Reference input
Video Formats
- (HD) 1920 1080p
- (HD) 1920x1080PsF
- (HD) 1920x1080i
- (HD) 1280x720p
- (SD) 625i
- (SD) 525i
- YCbCr, 4:2:2, 10-bit
Video Input Digital
- 1x 3G-SDI, 1x BNC
- 3G/HD/SD, SMPTE-259/292/372/424
- Single Link 3G-SDI Level A, SMPTE-425-1
- (HD) 1920x1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- (HD) 1920x1080PsF 23.98, 24, 25, 29.97, 30
- (HD) 1920x1080i 50, 59.94, 60
- (HD) 1280x720p 50, 59.94, 60
- (SD) 625i 50
- (SD) 525i 59.94
Video Output Digital
- 1x 3G-SDI outputs, 1x BNC
- 3G/HD/SD, SMPTE-259/292/424
- Single Link 3G-SDI Level A, SMPTE-425-1
- (HD) 1080p 23.98 (for 23.98 video inputs)
- (HD) 1080p 24 (for 24 video inputs)
- (HD) 1080p 25 (for 50 video inputs)
- (HD) 1080p 29.97 (for 59.94 video inputs)
- (HD) 1080p 30 (for 60 video inputs)
- (HD) 1080p 50 (for 50 video inputs)
- (HD) 1080p 59.94 (for 23.98, 59.94 video inputs)
- (HD) 1080p 60 (for 24, 30 or 60 video inputs)
- (HD) 1080PsF 23.98 (for 23.98 video inputs)
- (HD) 1080PsF 24 (for 24 video inputs)
- (HD) 1080PsF 25 (for 50 video inputs)
- (HD) 1080PsF 29.97 (for 59.94 video inputs)
- (HD) 1080Psf 30 (for 30 or 60 video inputs)
- (HD) 1080i 59.94 (for 23.98, or 59.94 video inputs)
- (HD) 1080i 60 (for 24, 30, or 60 video inputs)
- (HD) 1080i 50 (for 25 or 50 video inputs)
- (HD) 720p 50 (for 50 video inputs)
- (HD) 720p 59.94 (for 23.98, 59.94 video inputs)
- (HD) 720p 60 (for 24, 30, or 60 video inputs)
- (SD) 625i 50 (for 25 or 50 fps video inputs)
- (SD) 525i 59.94 (for 23.98 or 59.94 video inputs)
Monitor Output Digital
- 1x HDMI standard type A connector
- HD/SD
- Color space, YCbCr or RGB
- Bit depth, 8 or 10
- RGB Range, SMPTE or Full Range
Video Processing
- Frame rate conversion/film cadence removal/insertion (3:2)
- Freeze (on input signal loss) to black or last good frame
- AFD input detection, down-convert control
- Nominal video delay HD/SD, 1 frame
Up-Conversion
- Hardware 10-bit
- 4x3 Pillar: results in a 4x3 image at center screen with black sidebars
- 14x9 Pillar: results in a 4x3 image zoomed slightly to fill a 14x9 image with black side bars
- Full Screen: results in a 4x3 image stretched horizontally to fill in a 16x9 screen
- Letterbox to Full: results in image zoomed to fill fullscreen
- Wide Zoom: results in a combination of zoom and horizontal stretch to fill a 16x9 screen; this setting will introduce a small aspect ratio change
Down-Conversion
- Hardware 10-bit
- Crop: image is cropped to fit new screen size
- Anamorphic: HD image is converted to full-screen SD with a 16x9 aspect ratio
- 14x9: image is reduced slightly with aspect ratio preserved, black is added top and bottom, and the left and right sides are cropped
- Auto AFD: automatically selects the best down-convert mode based on the input video's Active Format Description (AFD) code
- Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved
Cross-Conversion
- Hardware 10-bit
- 1080i to 720p
- 720p to 1080i
- 720p to 1080PsF
Aspect Ratio Converstion for
SD to SD
- Letterbox: transforms SD anamorphic material to a letterboxed image
- H Crop: produces a horizontally stretched effect on the image; transforms anamorphic SD to full frame
- SD Pillarbox: produces an image in the center of the screen with black borders on the left and right sides and an anamorphized image in the center
- V Crop: transforms SD letterbox material to an anamorphic image
- 14x9: anamorphic to 14x9 conversion
Audio Input Digital
- 48 kHz sample rate
- 1x SDI embedded input
- 16-channels, 24-bit (20-bit SD), SMPTE-272/299
Audio Output Digital
- 48 kHz sample rate
- 1x SDI embedded output
- 16-channels, 24-bit (20-bit SD), SMPTE-272/299
Audio I/O
- 16-channel embedded SDI audio input
- 16-channel embedded SDI audio output
- 8-channel HDMI audio output
- Balanced analog audio outputs, 2x 3-Pin terminal block connectors
Ancillary Data
- Supports pass-through of PCM embedded audio
- Supports pass-through of non-PCM audio when source is in time with the selected ref (SDI In or Ext Ref). Non-PCM audio is not supported during frame sync operation.
- All other ANC data is not passed
Reference Input
- Supported reference video inputs include:
- 1080i tri-level sync
- 1080p tri-level sync
- 720p tri-level sync
- 625i Color Black
- 525i Color Black
- 75-ohm terminating
Genlock
- Lock to External Reference
- Lock to SDI input
- Free run
HDCP
- The OG-FS-Mini does not encode the HDMI output with HDCP encryption. By definition, HD-SDI inputs to the OG-FS-Mini are unencrypted. The HDMI specification requires HDMI monitors to support unencrypted inputs.
User Interface
- External DIP switch
- openGear DashBoard network control software via Windows, macOS or Linux
Size (w x d x h)
- openGear standard form factor, front slot and rear card. Two slots required for each card
Weight
- 0.5 lb (0.3 kg)
Power
- openGear frame compatible, 7.0 watts max per card
Environment
- Safe Operating Temperature Range: 0 to 40 C (32 to 104 F)
- Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
- Operating Relative Humidity: 10-90% noncondensing
- Operating Altitude: <3,000 meters (<10,000 feet)