Blustream IP2000UHD-TX - UHD Video Transmitter over IP

Avacab Oficial Dealer

Transmitter for UHD multicast distribution that enables virtually latency-free (1 frame) distribution of HDMI video over a 1GB network switcher. Supports HDCP 2.2 HDMI 4K, thanks to its lossless compression technology, offers HDMI, bi-directional IR, RS-232 and USB/KVM up to a length of 100m over a standard network architecture. It can be powered via PoE from the network switch or locally if the switch does not support PoE. With multiple configuration options available, the Multicast solution is ideal for both commercial and residential installations.
 
It also provides the ability to control all transmitters and receivers in this range through downloadable software, allowing a very practical and intuitive way to configure as we wish the signal switching and viewing configurations. In addition they are a system of independent and configurable users to be able to limit the access to the control of certain equipment of the network.

Features of the Blustream IP video transmitter IP2000UHD-TX

• Advanced UHD video over 1Gb Network
• Virtually unlimited system size
• Extends HDMI up to a distance of 100m over a single CAT cable
• Supports up to 4K HDR UHD video sources (3840 x 2160 @30Hz 4:4:4, 4096 x 2160 @24Hz 4:4:4, and 4K @60Hz 4:2:0) 
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus, and DTS-HD Master Audio transmission
• Advanced signal management for independent routing of IR, RS-232, USB/KVM, audio and video
• PoE (Power over Ethernet) to power Blustream products from PoE switch
• HDCP2.2 compliant with advanced EDID management
• Analogue L/R audio embedding
• Analogue L/R audio breakout
• Local 24-56V power supply (should Ethernet switch not support PoE) - sold separately
• Features 4 operational modes:
  • Matrix distribution (requires 1GB network switch)
  • Video wall (requires 1GB network switch)
  • One-to-one HDMI extender (no network switch required)
  • One-to-many HDMI extender (no network switch required)