• Out-of-Stock

Gefen EXT-HD2IRS-LAN-RX - HDMI RS232 IR receiver over IP

GEF-EXT-HD2IRS-LAN-RX

HDMI over IP receiver with RS-232 and IR Supports up to 1080p and 1920x1200 (WUXGA). HDCP compatible. Deep Color, 7.1 digital audio and Lip-Sync. Web control interface

logo Gefen

logo Gefen

  

HDMI over IP receiver with RS-232 and Bi-Directional IR over Local Area NetworkThe HD over IP w/RS-232 and 2-way IR extends HDMI, RS-232, and bi-directional IR over a Gigabit Local Area Network. Resolutions up to 1080p Full HD and 1920x1200 (WUXGA), HDCP, Deep Color, 7.1 channel High Bit Rate digital audio, and Lip-Sync pass-through are supported. The Sender and Receiver units can be automatically or manually configured to unique IP addresses to allow the connection of multiple Senders and Receivers to the same network. Multiple Receiver units can simultaneously connect to any Sender unit within the network including the Gefen KVM over LAN products with HDMI, DVI, or VGA video, to create a virtual crosspoint matrix of just over 65,000 Sender and Receiver units total, depending on the network bandwidth and number of ports on the network switch (see Notes 1 and 2). 

IR control can be extended from Sender to Receiver and from Receiver to Sender, allowing the control of source units and displays remotely. The IR input ports on Sender and Receiver units can accommodate both the Gefen powered IR extender EXT-RMT-EXTIRN and electrical IR from automation control devices. RS-232 serial control can also be extended between each Sender and Receiver unit. The built-in web server interface makes control, set-up, and configuration simple and intuitive. When using multiple Senders and Receivers as a "Virtual Matrix", you can connect to any of the Senders within the network by accessing the web interface of each Receiver unit via a web browser on a mobile device or computer, or by using the Gefen KVM/Video over IP Keyboard Switching Controller software (available for download at www.gefen.com). The Gefen HD over IP extender is the perfect solution for large scale remote HD content access and digital signage applications.

  
Gefen EXT-HD2IRS-LAN-RX features

  • Extends HDMI, RS-232, and bi-directional IR over IP, using a Gigabit Local Network
  • Supports resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA)
  • Supported HDMI Features:
  • HDCP
  • Deep Color
  • LPCM 7.1 audio, Dolby® TrueHD, and DTS-HD Master Audio™
  • Lip-Sync pass-through
  • Built-in web interface facilitates intuitive set up and operation
  • Any of the Senders within a network can be accessed by any Receiver unit via a web browser on a mobile device or computer, or by using the Gefen KVM/Video over IP Keyboard Switching
  • Controller software (available for download at www.gefen.com)
  • Supports a total of just over 65,000 Sender and Receiver units, depending on the network bandwidth and number of ports on your network switch
  • Mode Selector function in web interface for sharpness or motion optimization of image
  • Versatile IR In/Ext ports work with powered Gefen IR extenders and electrical IR from automation control devices
  • Field-upgradable firmware via web server interface
  • Locking power supply connectors
  • RS-232 3.5mm mini-stereo-jack-to-DB-9 adaptors included
  • Surface mountable

  

Logo-Garantia-2

Data sheet

Video Inputs
HDMI
Outputs
HDMI
Max. Video Resolution
625i / 525i - SD
1280x720 - HD
1920x1080 - HD
Max. VESA Resolution
800x600 - SVGA
1024x768 XGA
1280x768 - WXGA
1280x1024 - SXGA
1366x768 - WXGA
1400x1050 - SXGA+
1600x1200 - UXGA
1920x1200 - WUXGA
Data and Control
Ethernet
IR
RS-232
Transmisión
Ethernet
Range
100 m

  logo Gefen

   

Maximum Pixel Clock165 MHz
Maximum TMDS Clock225 MHz
Video Input Connector (Sender)(1) HDMI Type A 19-pin, female, locking
Video Output Connector (Receiver)(1) HDMI Type A 19-pin, female, locking
RS-232 ports (Sender/Receiver)(1) 3.5mm mini-stereo jack (DB-9 adaptors included)  
IR Emitter ports (Sender/Receiver)(1) 3.5mm mini-mono jack
IR In/Extender ports (Sender/Receiver)(1) 3.5mm mini-stereo jack
IR ExtenderEXT-RMT-EXTIRN
Ethernet connectors (Sender/Receiver)(1) RJ-45, shielded
Reset buttons (Sender/Receiver)(1) tact-type, recessed
Link Indicator (Sender/Receiver)(1) LED, amber
Power Indicator (Sender/Receiver)(1) LED, green
Power Supply (Sender / Receiver)5V DC, locking
Power Consumption (Sender)6W maximum
Power Consumption (Receiver)4W maximum
Operating Temperature0 to +50°C
Operating Humidity+10 to +90%, Relative Humidity, non-condensing
Storage Temperature-20 to +85°C
Storage Humidity0 to +95%, Relative Humidity, non-condensing
MTBF50000 hours
Dimensions (Sender / Receiver) (W x H x D)   4.3" x 1" x 3.2" (110mm x 26mm x 80mm)
Unit WeightEXT-HD2IRS-LAN-TX: 0.4 lbs. (0.2 kg)
EXT-HD2IRS-LAN-RX: 0.4 lbs. (0.2 kg)
Shipping WeightEXT-HD2IRS-LAN-TX: 2.0 lbs. (0.9 kg)
EXT-HD2IRS-LAN-RX: 2.0 lbs. (0.9 kg

You might also like

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password