Magewell USB Capture HDMI Gen2 - HDMI HD capture device

Magewell USB Capture HDMI Gen2 - HDMI HD capture device

MAG-32060

Record or stream an HDMI signal via USB 3.0 with the Magewell USB Capture HDMI Gen 2. With its HDMI v1.4a input, this capture device accepts resolutions up to 1920x1200p60. If you need to stream or record at a certain resolution, the USB Capture HDMI will internally convert the input signal to the target resolution. It can also perform frame rate conversion and de-interlacing in real time with its own hardware, removing the processing load from your computer's CPU.

Since USB Capture HDMI uses your computer's existing drivers, the capture device will work with any software that supports those drivers. If you do not have a USB 3.0 port available, USB Capture HDMI will work with a USB 2.0 port, although resolution and frame rate capabilities will be reduced due to restricted bandwidth.
  

Magewell - Avacab distribuidor oficial Magewell - Todos los productos Magewell en Avacab
Official Dealer
€289.00 Tax excluded
349,69 € Con IVA
STOCK
Quantity
En Stock

Magewell - Avacab distribuidor oficial Magewell - Todos los productos Magewell en Avacab
Avacab Official Dealer

 
 
 
  

External HDMI capture card. Supports resolutions up to 2048x2160. Connection to any computer via USB 3.0. Can work under Windows, Mac or Linux operating systems. It is compatible with RGB or YUV signals at 8, 10 or 12 bits and supports capture up to 120fps depending on the resolution and capacities of the system in which it is connected.

  

logo-garantia-3

logo rohs

Data sheet

Video Inputs
DVI
HDMI
Outputs
USB
Max. Video Resolution
625i / 525i - SD
1280x720 - HD
1920x1080 - HD
2048x1080 - 2K
Max. VESA Resolution
1024x768 XGA
1152x864 - XGA+
1280x768 - WXGA
1360x768 - WXGA
1366x768 - WXGA
1400x1050 - SXGA+
1600x1200 - UXGA
1920x1200 - WUXGA
Data and Control
USB
Magewell - Avacab distribuidor oficial Magewell - Todos los productos Magewell en Avacab
Avacab Official Dealer

 
 
 
  

Supported OS

  • Windows
    • Windows 7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64)
  • Linux (support x86, x64 & ARM architecture)
    • Ubuntu 12.04/14.04/16.04/17.04/17.10/18.04 (x86 & x64)
    • CentOS 6.5/7 (x86 & x64)
    • Fedora 25/26/27 (x86 & x64)
    • Red hat 6.5 and above (x86 & x64)
    • Other Linux OS with kernel version 2.6.35 and above
  • Mac
    • OS X 10.9/10.10/10.11
    • macOS 10.12 and above
  • Chrome OS


Recommended OS (tested)

  • Windows
    • Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2 DataCenter/Server 2016 R2 DataCenter (x86 & x64)
  • Linux
    • Ubuntu 12.04/14.04/16.04 (x86 & x64)
    • Ubuntu 17.04/17.10/18.04 (x64)
    • CentOS 6.5/7.2 (x86 & x64)
    • Fedora 25/26 (x64)
    • Red hat 6.5 (x86 & x64)
  • Mac
    • OS X 10.9.5/10.10/10.11.2/10.11.3/10.11.4
    • macOS 10.12/10.13.2/10.13.3/10.14.3/10.15


Supported APIs

  • Windows
    • DirectShow
    • Wave API/DirectSound/WASAPI
  • Linux
    • V4L2
    • ALSA
  • macOS
    • AVCaptureSession
    • AudioUnit


Supported Software

  • VLC
  • VirtualDub
  • OBS
  • XSplit
  • vMix
  • VidBlaster
  • Wirecast
  • Microsoft Media Encoder
  • Adobe Flash Media Encoder
  • Any other DirectShow/V4L2/AVCaptureSession based encoding or streaming software


Input Interfaces

  • HDMI
    • DVI-D 1.0
    • HDMI 1.4a


Host Interface

  • USB 3.0
    • compatible with USB 2.0
    • compatible with USB 3.1 Gen 1


Input features

  • Support for input video resolutions up to 2048x2160


HDMI Specific Features

  • 165MHz HDMI receiver
  • Adaptive HDMI equalizer support for cables lengths up to 30M
  • Support for customized EDID
  • Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
  • Full colorimetry support
  • Support for 8/10/12-bit color depth
  • Support for RGB 4:4:4,YCbCr 4:4:4,YCbCr 4:2:2 color sampling
  • Support for 2 channel IEC60958 audio streams
  • Support for extraction of audio formation information & channel status data
  • Support for extraction of video timing information
  • Support for extraction of 3D format information
  • Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.


Video Capture format

  • Support for capture resolutions up to 2048x2160
  • Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency. Typical capture frame rates on the Intel USB3.0 controller are as follows.)
    • 1920x1080 YUY2 (up to 75fps)
    • 1920x1080 RGB24 (up to 60fps)
  • Support for YUY2 & UYVY 4:2:2 8-bit
  • Support for RGB24 & RGB32 4:4:4 8-bit
  • The default capture format is YUY2. More capture formats can be set using USB Capture Utility.


Video Processing Features

  • Video processing pipelines with 160 Mpixels/s processing bandwidth
  • Video cropping
  • Video scaling
  • Video de-interlacing
    • Weave
    • Blend top & bottom field
    • Top field only
    • Bottom field only
  • Video aspect ratio conversion
    • Auto or manual selection of input aspect ratio
    • Auto or manual selection of capture aspect ratio
    • Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
  • Video color format conversion
    • Auto or manual selection of input color format & quantization range
    • Auto or manual selection of capture color format, quantization range & saturation range
    • Support for RGB, YCbCr 601, YCbCr 709 color formats
    • Support for Limited or Full quantization range
    • Support for Limited, Full & ‘Extended gamut’ saturation range
  • Video frame rate conversion
  • Vertical flip and mirror


Multiple devices on one computer

  • Support for connecting multiple USB devices to one system
  • Support for setting the device serial number as the device name shown in the system using USB Capture Utility


SDK

  • The USB Capture SDK provide functions including signal status extraction, capture configuration and real-time audio & video capture, etc.


Firmware Upgrade

  • Multiple devices in one system can be upgraded simultaneously


LED Indicator

  • Status LEDs indicate the working state of each channel:
    • Pulsing slowly: idle
    • On: input signal locked
    • Off: input signal unlocked
    • Double blinks: memory failed or FPGA configuration failed


Form Factor

  • 92.2mm (L) x 40.2mm (W) x 12.3mm (H)


Accessories

  • USB 3.0 cable


Power Consumption

  • 5V max current: ~0.5 A
  • max power consumption: ~2.5 W


Working Environment

  • Operating temperature: 0 to 50 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative Humidity: 5% to 90% non-condensing

  

You might also like

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password