• On sale!

Benro A48FDS4PRO - Aluminum monopod with 3-leg base up to 8.8lb

BNR-A48FDS4PRO

The Benro A48FDS4PRO Video features an 8.8lb load of support and a ball-joint 3-leg folding base for smooth and stable shots, along with reverse folding legs for compact travel. The maximum height of this travel-friendly monopod is 68.5", which can be easily set by locking leg levers, which combined with anti-rotation leg sections enable quick and free setup.
  

Logo_Benro_Lista

€228.00 Tax excluded
275,88 € Con IVA
- Delivery date in 4-5 days.
Quantity
Available

Logo_Benro_Lista

    
With the compact Benro S4Pro fluid head attached to the A48FD aluminum monopod with 3-leg base, you'll have the versatility to get up close to your subjects on the go whenever the opportunity arises. The base of the legs will provide you with the necessary support to do it in a controlled way, so that there is some resistance to stabilize your movements. At the same time, the monopod will serve you similarly to a tripod, as well as a hand-held nib.

The S4Pro supports loads up to 8.8 pounds and offers 2-steps of counterweight. It is made of magnesium and aluminum and comes with a scroll bar that can be attached to either side. This head has a flat base with a 3/8 "-16 thread on the bottom, and this provides additional versatility in that you can move it from the monopod directly to other mounts, such as sliders. The monopod and the Patella have a height range of 26 to 68.5 ". The S4Pro head also offers two 1/4 "-20 tapped holes for attaching articulated arms and other accessories.
 

Features of fluid head:

  • Supports weight of 8.8lb
  • 60mm flat base with 3/8 "-16 thread
  • Compatible with 60mm flat base tripods and can be mounted directly to most gliders, jibs and monopods
  • 1-2 counterweight steps
  • Fixed drag of horizontal and vertical movement
  • Independent pan and tilt locks
  • Tilt range of + 90 / -75 °
  • 360 ° panoramic range
  • Made of magnesium and aluminum
  • Rosette adapters on the left and right side to hold the included panning rod
  • Sliding chamber plate with safety lock
  • 1/4 "-20 and 3/8" -16 camera screws are included and can be stored in dedicated spaces on the top of the head, under the camera plate
  • Two 1/4 "-20 threaded holes for accessories
      

Features of monopod:

  • 4-section design with flip closures
  • 3-leg base with ball joint, capable of locking as well as folding for transport
  • Height range from 22 to 68.5 "with head mounted
  • 3/8 "-16 mounting screw

Data sheet

Max. Payload
From 6.6lb to 15.4lb
Material
Aluminum

Logo_Benro_Lista

  
Specifications

 

Monopod head

  • Head type: Fluid head
  • Base mounting: 3/8 "-16 Female
  • Camera mounting screw: 1/4 "-20 Male, 3/8" -16 Male
  • Number of spirit levels: 1
  • Independent pan lock: Yes
      

Pan and tilt range

  • Vertical tilt: -75 ° to + 90 °
  • Pan range: 360 °
      

Legs

  • Mounting screw: 3/8 "-16 Male
  • Closure type: Flip closure
  • Sections: 4
  • Monopod Features: Drop Down Base
      

General

  • Load capacity: 8.8 lb / 3.99 kg
  • Maximum height: 68.5 "/ 174 cm
  • Minimum height: 26 "/ 66 cm
  • Material: Aluminum alloy, magnesium alloy
  • Weight: 4.8 lb / 2.18 kg

You might also like

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password