Magewell Pro Convert HDMI 4K Plus - Conversor HDMI a NDI
Convierta el vídeo HDMI en un flujo NDI con el convertidor HDMI a NDI Pro Convert HDMI 4K Plus de Magewell. El Pro Convert HDMI 4K Plus cuenta con entrada HDMI con bucle y 8 canales de audio embebido. Admite hasta DCI 4K 4096x2160. El puerto Gigabit Ethernet RJ45 admite una salida NDI codificada hasta 4096x2160 8 bits 4:2:2 a 60fps.
Conversor de HDMI con audio embebido a NDI. Los flujos de datos NDI estarán disponibles para todos los equipos y software compatibles con NDI en la misma red, independientemente de la distancia física, lo que garantiza una producción en vivo de alta calidad y baja latencia, basados en IP, superiores a las soluciones de producción en vivo tradicionales.
El flujo NDI puede enviarse a aplicaciones de codificación o streaming compatibles con NDI, como OBS, XSplit, vMix, Wirecast y otras, a través de Ethernet. El puerto mini DIN-8 tally/PTZ proporciona una entrada de Tally. Los LEDs indican Tally, alimentación, salida y entrada. Se alimenta mediante adaptador de 5V a USB 2.0 o por PoE. Se puede gestionar con una interfaz de usuario web para configurar los ajustes y realizar actualizaciones de firmware a través del puerto USB. Con el Magewell Pro Convert HDMI 4K se Incluye un cable USB, adaptador de 5V, cable mini DIN-8 y un soporte en L para montaje.
Ficha técnica
- Protocolos
- NDI|HX
- Entradas Vídeo
- HDMI
- Salidas Vídeo
- NDI|HX
- Resolución Max. Vídeo
- 625i / 525i - SD
1280x720 - HD
1920x1080 - HD
2048x1080 - 2K
3840x2160 - UHD
4096x2160 - 4K DCI - Entradas Audio
- Embebido
- Datos y Control
- Ethernet
USB - Alimentación
- DC
PoE - Comunes
- Tally
- Transmisión
- NDI
Supported Web Browser (tested)
- Microsoft Internet Explorer 11
- Microsoft Edge
- Mozilla Firefox version 61 and above
- Google Chrome version 49 and above
- Apple Safari 11.1 and above
- Opera 55.0.2994.44 and above
Supported Software (tested)
- OBS
- XSplit
- vMix
- VidBlasterX
- Wirecast
- streamstar SW
- mimoLive
- Any other NewTek NDI-enabled encoding or streaming software
Input Interfaces
- HDMI
- DVI-D 1.0
- HDMI 1.4
- HDMI 2.0
Loop-through Interface
- HDMI
- DVI-D 1.0
- HDMI 1.4
- HDMI 2.0
Storage Interface
- SD Card (functions to be developed)
PTZ + TALLY Control
- Mini-DIN–8 jack
Screw Mounting Hole
- ¼–20 mounting hole
Network Interfaces
- 10/100/1000Mbps Ethernet
- IEEE 802.3af PoE
USB Interface
- USB2.0 Type B
- 5V/2.1A power supply
- USB RNDIS/ECM
Input feature
- Support for input video resolutions up to 4:4:4 8-bit 4096x2160 60fps
HDMI Specific Features
- 600MHz HDMI receiver
- Adaptive HDMI equalizer
- Support for customized EDID
- Support for extraction of AVI/Audio InfoFrames
- Full colorimetry support
- Support for up to 4096x2160 4:4:4 60fps input signals
- Support for 8 channel IEC60958 audio streams
- Support for extraction of audio formation information & channel status data
- Support for extraction of video timing information
- Support for extraction of 3D format information
- Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.
NDI® Output Format
- Support for 4:2:2 8-bit output
- Support for up to 4096x2160 60fps or 1920x1080 240fps
- Support for NDI 4.1
Video Processing Features
- Video processing pipelines with 4096x2160 60fps
- Video brightness, contrast, saturation, hue adjustment
- Video de-interlacing
- Top field only
- Bottom field only
- Video aspect ratio conversion
- Auto or manual selection of output aspect ratio
- Video color format conversion
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of output color format, quantization range & saturation range
- Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
- Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
- Support for Limited or Full quantization range
- Support for Limited, Full & ‘Extended gamut’ saturation range
- Video frame rate conversion
- Video mirror flip
NDI® Source Name
- Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’.
- Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’.
- Support for setting board-index, from 0 to F, through on-board rotary switch
Firmware Upgrade
- Support for manual update using Web UI
LED Indicator
- Status LEDs indicate:
- the state of power supply: on/off
- Tally: preview/program
- the state of input signal: locked/unlocked
- the state of loopthrough signal: loopthrough connected and signal detected/undetected
Form Factor
- 117.5mm (L) x 66.7mm (W) x 23.4mm (H)
Accessories
- USB 2.0 A to B Cable
- 5V/2.1A power adaptor
- Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)
- L-bracket
- LED matrix panel (optional)
Power Consumption
- 5V max current: ~2A
- Max power consumption: ~10W
Working Environment
- Operating temperature: 0 to 45 deg C
- Storage temperature: –20 to 70 deg C
- Relative Humidity: 5% to 90% non-condensing