- ¡En oferta!
- -5%
La tarjeta Pro Capture Dual DVI de Magewell es una tarjeta PCIe 2.0 x4 de perfil normal, que permite capturar dos canales DVI, VGA, Componentes o HDMI + audio embebido por las dos entradas DVI. Admite varios modos de muestreo, profundidad y formato de color, hasta 8 canales de audio (sólo HDMI) y resoluciones de salida hasta 2048x2048 y 120fps. La tarjeta de captura también es capaz de realizar numerosos procesos de vídeo, como recorte, escalado, desentrelazado, conversión de relación de aspecto, conversión de formato de color, conversión de velocidad de cuadros y OSD.
La Pro Capture Dual DVI admite varias tarjetas por sistema y flujos de salida ilimitados para cualquier canal de entrada, con parámetros ajustables de forma independiente. Otras características son: latencia ultra-baja, marca de tiempo y sincronización A/V. La capturadora es compatible con Windows, Mac y Linux, con APIs para Windows y Linux.
Magewell Pro Capture Dual DVI - Tarjeta captura 2x DVI
MAG-11070
La tarjeta Pro Capture Dual DVI de Magewell es una tarjeta PCIe 2.0 x4 de perfil normal, que permite capturar dos canales DVI, VGA, Componentes o HDMI + audio embebido por las dos entradas DVI. Admite varios modos de muestreo, profundidad y formato de color, hasta 8 canales de audio (sólo HDMI) y resoluciones de salida hasta 2048x2048 y 120fps. La tarjeta de captura también es capaz de realizar numerosos procesos de vídeo, como recorte, escalado, desentrelazado, conversión de relación de aspecto, conversión de formato de color, conversión de velocidad de cuadros y OSD.
La Pro Capture Dual DVI admite varias tarjetas por sistema y flujos de salida ilimitados para cualquier canal de entrada, con parámetros ajustables de forma independiente. Otras características son: latencia ultra-baja, marca de tiempo y sincronización A/V. La capturadora es compatible con Windows, Mac y Linux, con APIs para Windows y Linux.
569,05 €
Sin IVA
5% de descuento
688,55 €
Con IVA
599,00 €
Sin IVA
- Plazo de entrega inmediato
Tarjeta de captura DVI, VGA, Componentes o HDMI+audio, con detección automática del formato de señal de entrada. Soporta resoluciones hasta 2048x2160px con procesado a 10-bits. Interface PCIe Gen2 x4. Incorpora escaldor up/down y conversor de relación de aspecto y del espacio de color, para hacerla compatible con todo tipo de señales.
Características de la tarjeta de captura Magewell Pro Capture Dual DVI
Interfaz de entrada
- DVI x2
- Soporta una resolución de entrada de hasta 2048x2160 píxeles
Interfaz de host
- PCIe Gen2 x4
Motor de vídeo
- Procesamiento de vídeo de 10 bits
- Desentrelazado
- Recorte
- Ajuste de color
- Marca de tiempo del hardware
- Conversión del espacio de color
- Conversión up/down
- Conversión de la relación de aspecto
- OSD
- Modo de transmisión SG-DMA
Detección y soporte de señales
- Detección automática del formato de la señal de vídeo de entrada
- HDMI 3D
- Código de tiempo
Entorno de software
- Sistema operativo: Windows, Linux, Mac
- Driver y Firmware: Controlador universal, firmware actualizable
- Software incluido: Utilidad Pro Capture, Capture Express
- Más de 50, entre ellos: Livestream, OBS, QuickTime, Skype, Streamstar, VLC, vMix, Watchout, Windows Media Encoder, Wirecast y muchos más
Ficha técnica
- Entradas Vídeo
- Componentes
DVI
HDMI
VGA - Resolución Max. Vídeo
- 625i / 525i - SD
1280x720 - HD
1920x1080 - HD
2048x1080 - 2K - Resolución Max. VESA
- 1024x768 - XGA
1152x864 - XGA+
1280x768 - WXGA
1360x768 - WXGA
1366x768 - WXGA
1400x1050 - SXGA+
1600x1200 - UXGA
1920x1200 - WUXGA
2048x1152 - QWXGA
2048x1536 - QXGA
Supported OS
- Windows
- Windows 7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64)
- Linux (support x86, x64 & ARM architecture)
- Ubuntu 12.04/14.04/16.04/17.04/17.10/18.04 (x86 & x64)
- CentOS 6.5/7 (x86 & x64)
- Fedora 25/26/27 (x86 & x64)
- Red hat 6.5 and above (x86 & x64)
- Other Linux OS with kernel version 2.6.35 and above
- Mac
- OS X 10.9/10.10/10.11
- macOS 10.12 and above
Recommended OS (tested)
- Windows
- Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2 DataCenter/Server 2016 R2 DataCenter (x86 & x64)
- Linux
- Ubuntu 12.04/14.04/16.04 (x86 & x64)
- Ubuntu 17.04/17.10/18.04 (x64)
- CentOS 6.5/7.2 (x86 & x64)
- Fedora 25/26 (x64)
- Red hat 6.5 (x86 & x64)
- Mac
- OS X 10.9.5/10.10/10.11.2/10.11.3/10.11.4
- macOS 10.12/10.13.2/10.13.3/10.14.3/10.15
Supported APIs
- Windows
- DirectShow
- DirectKS
- Wave API/DirectSound/WASAPI
- Linux
- V4L2
- ALSA
- macOS
- AVCaptureSession
- AudioUnit
Supported Software
- VLC
- VirtualDub
- OBS
- XSplit
- vMix
- VidBlaster
- Wirecast
- Microsoft Media Encoder
- Adobe Flash Media Encoder
- Any other DirectShow/V4L2/AVCaptureSession encoding/streaming software
Input Interfaces
- 2x DVI-I
- DVI 1.0
- HDMI 1.4a (via breakout cable)
- VGA (via DVI2VGA connector)
- Component (via breakout cable)
Host Interface
- PCIe Gen2 x4
Input Features
- Auto scan of video input sources when there is no signal input to the currently selected input source
- Manual selection of video input source
- Auto selection of linked (embedded) audio input source when the video input source changes
- Manual selection of audio input source
- Support for standard crossbar based on video input source selection
- Support for input video resolutions up to 2048x2160 pixels
VGA & Component Specific Features
- 12-bit ADC
- Support for RGB & YCbCr (YUV) color formats
- Support for ‘Separated sync’, ‘Composite sync’, ‘Sync-on-green’ (SOG), ‘Sync-on-luminance’ (SOY)
- Support for DMT, CEA, CVT, GTF video timings
- Input signals up to 165MHz pixel rate are digitized with 1:1 sampling
- Input signals over 165MHz pixel rate can be digitized with horizontal sub-sampling (resulting in some image quality loss - NOT officially supported)
- Auto detection of RGB & YCbCr color formats
- Auto or manual sampling phase adjustment
- Auto horizontal alignment
- Support for customized video timings
- Support for customized video resolutions for CVT/GTF timings
HDMI Specific Features
- 225MHz HDMI receiver
- Adaptive HDMI equalizer support for cables lengths up to 30M
- Support for customized EDID
- Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
- Full colorimetry support
- Support for 8/10/12-bit color depths
- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
- Support for up to 8-channel IEC60958/IEC61937 audio streams via SDK
- Support for extraction of audio formation information & channel status data
- Support for extraction of video timing information
- Support for extraction of 3D format information
- Support for extraction of Sony/Canon DSLR time code
- Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.
Video Capture Formats
- Support for capture image resolutions up to 2048x2160 pixels
- Support for capture frame rates up to 144fps (Actual capture frame rate can be limited by PCIe bandwidth, and at higher image resolutions - above 1280x1024 - by the pixel clock of the on-board video processing hardware. eg. Max frame rate at 1920x1080 = ~80fps. )
- Support for 4:2:0 8-bit capture formats: NV12, I420, YV12
- Support for 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY
- Support for 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32
- Support for 4:4:4 10-bit capture formats: V410, Y410
- More capture formats are supported via Magewell Capture SDK
Video Processing Features
- Two video processing pipelines with ~180Mpixels/s processing bandwidth for each one
- Full 10-bit video processing
- Video cropping
- Video scaling
- Video de-interlacing
- Weave
- Blend top & bottom field
- Top field only
- Bottom field only
- Video aspect ratio conversion
- Auto or manual selection of input aspect ratio
- Auto or manual selection of capture aspect ratio
- Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
- Video color format conversion
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of capture color format, quantization range & saturation range
- Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
- Support for Limited or Full quantization range
- Support for Limited, Full & ‘Extended gamut’ saturation range
- Video frame rate conversion
- Video OSD composition
- Support for PNG OSD image (up to 2048x2160)
- Support for dynamic loading of RGBA OSD image via SDK
Multiple Cards per System
- Support for multiple cards plugged to one system
- On-board rotary switch to set card number, with 16 positions from 0 to F
- System hardware device tree will display “01: Pro Capture Dual DVI” when rotary switch is set to 1, and so on
- The video and audio device names displayed in your software will include the card number (set by the rotary switch)
Multiple Capture Streams
- Unlimited capture streams for any one input channel
- Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream
Ultra Low Latency Support
- Latency of 64 video lines
- Partial notification mode in SDK
Timestamp & A/V Synchronization
- Hardware based 100ns high resolution clock
- Audio frames (192 audio samples) & video frames are stamped with hardware clock
- Hardware clock can be synchronized across cards (via SDK)
Video Capture SG-DMA
- ~400MB/s per channel DMA bandwidth in PCIe 2.0 system
- ~200MB/s per channel DMA bandwidth in PCIe 1.0 system
- Support for auto detection of Intel tiled GPU surface
- Support for DirectGMA for AMD video adapter chipsets
- Support for GPUDirect for Nvidia video adapter chipsets
SDK
- Magewell Capture SDK for easy integration, maximum flexibility and performance
Windows Driver Tweaks
- All options can be controlled by three levels of registry key: global level, product level and device level
- Video, Audio, Crossbar filter names can be customized via registry keys
Firmware Upgrade
- Multiple cards in one system can be upgraded simultaneously
- Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)
- Safe upgrade. If power off or system break down occur when the firmware is being upgraded, it will automatically restore to the initial version. This function is only available for firmware version 1.21 and above.
LED Indicator
- Status LEDs indicate the working state of each channel:
- Pulsing slowly: idle
- On: input signal locked
- Off: input signal unlocked
- Double blinks: memory failed or FPGA configuration failed
Form Factor
- Normal profile PCIe x4 Add-on Card
- 115.9mm x 91.29mm (without PCI bracket)
Accessories
- 2x DVI to VGA connectors
- 2x DVI-I to HDMI + Component breakouts
Power Consumption
- Max current at 12V: ~ 0.8 A
- Max current at 3.3V: ~ 0.55 A
- Max power consumption: ~ 11.4 W
Working Environment
- Operating temperature: 0 to 40 deg C
- Storage temperature: –20 to 70 deg C
- Relative Humidity: 5% to 90% non-condensing