Atlona AT-DVI60SRS - Passive DVI extender over CAT


Passive DVI-D extender kit over a single CAT5/6/7 cable. 50m range at resolutions up to 1920x1200 or 1080p. EDID compliant


245,00 €
- Check Availability
En Stock

Request a product query



DVI Passive Extender kit that allows to extend high resolution DVI-D digital signals at great distances. The DVI60SRS can transmit resolution such as 1920x1200 up to 160ft away or 1024x768 up to 180ft.

The AT-DVI60SRS can send high quality digital video from DVI enabled PC/Laptop through single cost effective Cat5, Cat6 or Cat7 cable to the remote monitor or projector, instead of using short and expensive DVI cables.

The DVI extender AT-DVI60SRS includes one transmitter and one receiver units. The transmitting unit is connected to your PC DVI output and the receiving unit is connected to the monitor or projector. The transmission distance between the transmitting and receiving units can be up to 50m (160ft) at resolutions up to 1920x1200 or 55m (180ft) at resolutions up to 1024x768. With compact size and requiring no power, AT-DVI60SRS is the most cost effective choice for bringing your impressive digital video to the remote display.

Atlona AT-DVI60SRS DVI extender kit features

  • DVI 1.1 compliant
  • Extend the transmission length 50m (160ft) at resolutions up to 1920x1200 or 55m (180ft) at resolutions up to 1024x768
  • Easy to install
  • No power required (passive)
  • Compact size
  • Direct plug-in
  • Capable of using CAT5/6/7 (568B Termination for optimal results)
  • Network Traffic LEDS (denotes active network traffic)

Tech Specs

  • Role of usage: Transmitter [TX] Receiver [RX]
  • DVI compliance: DVI 1.1
  • HDCP compliance: No
  • Video bandwidth Single-link: 165MHz [4.95Gbps]
  • Video support Up to WUXGA: [1920x1200@60Hz]
  • DVI over CAT5e transmission: 1920x1200@60Hz – 50m [160ft]
  • 1024x768@60Hz – 55m [180ft]
  • Audio support: No audio for DVI signal
  • Equalization: None
  • Input TMDS signal: 1.2 Volts [peak-to-peak]
  • Input DDC signal 5 Volts: [peak-to-peak, TTL] from DVI output
  • Input: 1 x DVI 1x RJ-45
  • Output: 1x RJ-45 1 x DVI
  • DVI connector: DVI-I [29-pin male digital only]
  • RJ-45 connector: WE/SS 8P8C with 2 LED indicators


Fiche technique

Entrées Vidéo
Résolutions supportées
1280x720 - HD
Resoluciones VESA
800x600 - SVGA
850x600 - WVGA
1024x768 XGA
1152x864 - XGA+
1280x768 - WXGA
1360x768 - WXGA
1366x768 - WXGA
1400x1050 - SXGA+
1600x1200 - UXGA
1920x1200 - WUXGA
Par Trenzado CAT
50 m
close Shopping Cart

Nouveau compte S'inscrire