• ¡En oferta!
  • -5%

Magewell Pro Capture HDMI - Tarjeta Captura HDMI YUV y CV

MAG-11040

Si necesitas capturar imágenes HDMI, pero manteniendo la posibilidad de capturar VGA y otras señales analógicas de vídeo, la tarjeta Magewell Pro Capture HDMI ofrece una solución fiable, fácil de instalar y compatible con cualquier software de edición o streaming de vídeo. Se puede instalar sobre Windows, Linux o Mac, en un slot PCIe Gen2. Dispone de entrada HDMI, que admite DVI, y un Sub-D de 9 pines, que con el cable adaptador suministrado, facilita la conexión YC, Compuesto o Componentes, además de audio analógico estéreo.

La Pro Capture HDMI dispone de un ADC de 12 bits y soporta resoluciones hasta 2048x2160 y 144fps. Es compatible con la mayoría de los programas de edición de vídeo y software como: VLC, VirtualDub, OBS, XSplit, vMix, VidBlaster, Wirecast, Microsoft Media Encoder, Adobe Flash Media Encoder y cualquier otro que soporte codificación y decodificación DirectShow / V4L2 / AVCaptureSession.

Magewell - Avacab distribuidor oficial Magewell - Todos los productos Magewell en Avacab
Distribuidor Oficial
255,55 € Sin IVA 5% de descuento
309,22 € Con IVA
269,00 € Sin IVA
- Plazo de entrega inmediato
Cantidad
Agregar a favoritos
Añadir a comparar
En Stock

Magewell - Avacab distribuidor oficial Magewell - Todos los productos Magewell en Avacab
Distribuidor Oficial

 
 
 
 
 

Tarjeta de captura HD para señales HDMI, Componentes y Compuesto con audio. Soporta resoluciones de entrada hasta 2048x2160 y se instala en cualquier ordenador que disponga de un slot PCIe Gen2 libre. 

Detecta automáticamente el formato de la señal de entrada y efectúa un procesado de 10-bits, con desentrelazado, ajuste de color, conversión con escalado de espacio de color y aspecto. Está pensada para operar bajo Windows, Linux o Mac
 

Características de la tarjeta de captura Magewell Pro Capture HDMI

  • Dos canales de procesamiento de vídeo con un ancho de banda de proceso de ~180Mpixels/s para cada uno de ellos.
  • Procesamiento completo de vídeo de 10 bits
  • Recorte de vídeo
  • Escalado de vídeo
  • Desentrelazado de vídeo
    • Intercalado
    • Mezcla de campos par e impar
    • Sólo campo impar
    • Sólo campo par
  • Conversión de la relación de aspecto del vídeo
    • Selección automática o manual de la relación de aspecto de entrada
    • Selección automática o manual de la relación de aspecto de captura
    • Tres modos de conversión de relación de aspecto: Ignorar (Anamórfico), Recortar o Rellenar (Buzón o Pillarbox)
  • Conversión de formato de color
    • Selección automática o manual del formato de color de entrada y rango de cuantificación
    • Selección automática o manual del formato de color de captura, rango de cuantización y rango de saturación
    • Compatibilidad con los formatos de color RGB, YCbCr 601, YCbCr 709, YCbCr 2020
    • Soporte para rango de cuantización limitado o completo
    • Soporte para un rango de saturación limitado, completo y de gama extendida
  • Conversión de velocidad de fotogramas de vídeo
  • Composición de vídeo
    • Soporte para imágenes PNG (hasta 2048x2160)
    • Soporte para la carga dinámica de imágenes RGBA OSD a través del SDK

   

Ficha técnica

Entradas Vídeo
Componentes
Compuesto
DVI
HDMI
S-Video
Resolución Max. Vídeo
625i / 525i - SD
1280x720 - HD
1920x1080 - HD
2048x1080 - 2K
Resolución Max. VESA
1024x768 - XGA
1152x864 - XGA+
1280x768 - WXGA
1360x768 - WXGA
1366x768 - WXGA
1400x1050 - SXGA+
1600x1200 - UXGA
1920x1200 - WUXGA
2048x1152 - QWXGA
2560x1600 - WQXGA
Entradas Audio
No Balanceado

Magewell - Avacab distribuidor oficial Magewell - Todos los productos Magewell en Avacab


Supported OS

  • Windows
    • Windows 7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64)
  • Linux (support x86, x64 & ARM architecture)
    • Ubuntu 12.04/14.04/16.04/17.04/17.10/18.04 (x86 & x64)
    • CentOS 6.5/7 (x86 & x64)
    • Fedora 25/26/27 (x86 & x64)
    • Red hat 6.5 and above (x86 & x64)
    • Other Linux OS with kernel version 2.6.35 and above
  • Mac
    • OS X 10.9/10.10/10.11
    • macOS 10.12 and above


Recommended OS (tested)

  • Windows
    • Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2 DataCenter/Server 2016 R2 DataCenter (x86 & x64)
  • Linux
    • Ubuntu 12.04/14.04/16.04 (x86 & x64)
    • Ubuntu 17.04/17.10/18.04 (x64)
    • CentOS 6.5/7.2 (x86 & x64)
    • Fedora 25/26 (x64)
    • Red hat 6.5 (x86 & x64)
  • Mac
    • OS X 10.9.5/10.10/10.11.2/10.11.3/10.11.4
    • macOS 10.12/10.13.2/10.13.3/10.14.3/10.15


Supported APIs

  • Windows
    • DirectShow
    • DirectKS
    • Wave API/DirectSound/WASAPI
  • Linux
    • V4L2
    • ALSA
  • macOS
    • AVCaptureSession
    • AudioUnit


Supported Software

  • VLC
  • VirtualDub
  • OBS
  • XSplit
  • vMix
  • VidBlaster
  • Wirecast
  • Microsoft Media Encoder
  • Adobe Flash Media Encoder
  • Any other DirectShow/V4L2/AVCaptureSession encoding/streaming software


Input Interfaces

  • HDMI type A
    • DVI 1.0
    • HDMI 1.4a
  • DB9
    • YC (S-Video)
    • Composite video
    • Analog audio (L+R)
    • Component video


Host Interface

  • PCIe Gen2 x1


Input Features

  • Auto scan of video input sources when there is no signal input to the currently selected input source
  • Manual selection of video input source
  • Auto selection of linked (embedded) audio input source when the video input source changes
  • Manual selection of audio input source
  • Support for standard crossbar based on video input source selection
  • Support for input video resolutions up to 2048x2160 pixels


Component Specific Features

  • 12-bit ADC
  • Support for RGB & YCbCr (YUV) color formats
  • Support for ‘Sync-on-green’ (SOG), ‘Sync-on-luminance’ (SOY)
  • Support for DMT, CEA, CVT, GTF video timings
  • Input signals up to 165MHz pixel rate are digitized with 1:1 sampling
  • Input signals over 165MHz pixel rate can be digitized with horizontal sub-sampling (resulting in some image quality loss - NOT officially supported)
  • Auto detection of RGB & YCbCr color formats
  • Auto or manual sampling phase adjustment
  • Auto horizontal alignment
  • Support for customized video timings
  • Support for customized video resolutions for CVT/GTF timings


HDMI Specific Features

  • 225MHz HDMI receiver
  • Adaptive HDMI equalizer support for cables lengths up to 30M
  • Support for customized EDID
  • Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
  • Full colorimetry support
  • Support for 8/10/12-bit color depths
  • Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
  • Support for up to 8-channel IEC60958/IEC61937 audio streams via SDK
  • Support for extraction of audio formation information & channel status data
  • Support for extraction of video timing information
  • Support for extraction of 3D format information
  • Support for extraction of Sony/Canon DSLR time code
  • Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.


YC & Composite Specific Features

  • 12-bit ADC
  • Support for NTSC, PAL and SECAM standards
  • Auto detection of video input standard


Video Capture Formats

  • Support for capture image resolutions up to 2048x2160 pixels
  • Support for capture frame rates up to 144fps (Actual capture frame rate can be limited by PCIe bandwidth, and at higher image resolutions - above 1280x1024 - by the pixel clock of the on-board video processing hardware. eg. Max frame rate at 1920x1080 = ~80fps. )
  • Support for 4:2:0 8-bit capture formats: NV12, I420, YV12
  • Support for 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY
  • Support for 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32
  • Support for 4:4:4 10-bit capture formats: V410, Y410
  • More capture formats are supported via Magewell Capture SDK


Video Processing Features

  • Two video processing pipelines with ~180Mpixels/s processing bandwidth for each one
  • Full 10-bit video processing
  • Video cropping
  • Video scaling
  • Video de-interlacing
    • Weave
    • Blend top & bottom field
    • Top field only
    • Bottom field only
  • Video aspect ratio conversion
    • Auto or manual selection of input aspect ratio
    • Auto or manual selection of capture aspect ratio
    • Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
  • Video color format conversion
    • Auto or manual selection of input color format & quantization range
    • Auto or manual selection of capture color format, quantization range & saturation range
    • Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
    • Support for Limited or Full quantization range
    • Support for Limited, Full & ‘Extended gamut’ saturation range
  • Video frame rate conversion
  • Video OSD composition
    • Support for PNG OSD image (up to 2048x2160)
    • Support for dynamic loading of RGBA OSD image via SDK


Multiple Cards per System

  • Support for multiple cards plugged to one system
  • On-board rotary switch to set card number, with 16 positions from 0 to F
  • System hardware device tree will display “01: Pro Capture HDMI” when rotary switch is set to 1, and so on
  • The video and audio device names displayed in your software will include the card number (set by the rotary switch)


Multiple Capture Streams

  • Unlimited capture streams for any one input channel
  • Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream


Ultra Low Latency Support

  • Latency of 64 video lines
  • Partial notification mode in SDK


Timestamp & A/V Synchronization

  • Hardware based 100ns high resolution clock
  • Audio frames (192 audio samples) & video frames are stamped with hardware clock
  • Hardware clock can be synchronized across cards (via SDK)


Video Capture SG-DMA

  • ~400MB/s per channel DMA bandwidth in PCIe 2.0 system
  • ~200MB/s per channel DMA bandwidth in PCIe 1.0 system
  • Support for auto detection of Intel tiled GPU surface
  • Support for DirectGMA for AMD video adapter chipsets
  • Support for GPUDirect for Nvidia video adapter chipsets


SDK

  • Magewell Capture SDK for easy integration, maximum flexibility and performance


Windows Driver Tweaks

  • All options can be controlled by three levels of registry key: global level, product level and device level
  • Video, Audio, Crossbar filter names can be customized via registry keys


Firmware Upgrade

  • Multiple cards in one system can be upgraded simultaneously
  • Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)
  • Safe upgrade. If power off or system break down occur when the firmware is being upgraded, it will automatically restore to the initial version. This function is only available for firmware version 1.21 and above.


LED Indicator

  • Status LEDs indicate the working state of each channel:
    • Pulsing slowly: idle
    • On: input signal locked
    • Off: input signal unlocked
    • Double blinks: memory failed or FPGA configuration failed


Form Factor

  • Low profile PCIe x1 Add-on Card
  • 92.76mm x 68.88mm (without PCI bracket)


Accessories

  • DB9 to YC + Composite + Analog Audio + Component breakout
  • Low Profile bracket


Power Consumption

  • Max current at 12V: ~ 0.34 A
  • Max current at 3.3V: ~ 0.16 A
  • Max power consumption: ~ 4.59 W


Working Environment

  • Operating temperature: 0 to 40 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative Humidity: 5% to 90% non-condensing
close Shopping Cart

Nuevo registro de cuenta

¿Tienes cuenta?
Entrar en vez O Restablecer contraseña