Sennheiser XSW 1-CI1 Wireless Instrument Set
Features of the Sennheiser XSW 1-CI1 Wireless Instrument Set
- Compact hand-held transmitter, robust instrument cable
- Antenna-switched diversity reception
- Integrated antennas
- Automatic frequency management and remote channel synchronization for easy configuration
- Selectable UHF frequencies within a large bandwidth
- Up to 10 compatible channels
Data sheet
- Salidas Audio
- Balanceado
- Data and Control
- Local
- Power
- Battery
DC
Specific References
- EAN13
- 4044155213201
Dimensions
Receiver: approx. 200 x 42 x 127 mm
Bodypack transmitter: approx. 71 x 96 x 28 mm
THD, total harmonic distortion
≤ 0.9%
Weight
approx. 340g (receiver), approx. 95g (transmitter)
Signal-to-noise ratio
≥ 103 dBA
RF output power
10 mW
Switching bandwidth
up to 24 MHz
Operating time
approx. 10 hrs
Modulation
Wideband FM
Power supply
Receiver: 12 V DC nom. / 300 mA
Transmitter: 2 AA size batteries, 1.5 V
Output voltage
1/4“ (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu
Housing
Rugged ABS housing
Frequency
8 frequency banks, each with up to 10 factory-preset channels
Frequency range
A: 548-572 MHz, GB: 606-630 MHz
B: 614-638 MHz
C: 766-790 MHz
D: 794-806 MHz
E: 821-832 MHz, 863-865 MHz
K: 925-937.5 MHz
Sensitivity
< 3 μV at 52 dB(A)rms S/N
SPL for peak deviation
130 dB
Squelch
adjustable from 3 dBμV to 28 dBμV (combined with pilot tone)
Synchronization
2.4 GHz, Low Power OQPSK (only active during synchronization)
Input sensitivity
1.5 mV / Pa
AF frequency response
Receiver: 50 to 16,000 Hz (–3 dB)
Adjustment Range Transmitter
0 to -30 dB, adjustable in 10 dB steps
Audio adjustment range
45 dB, adjustable in 5-dB steps
Line / Mic level
20 dB, switchable
Temperature Range
operation: 0°C to +40°C, storage: –20°C to +70°C
Receiver Principle
double superheterodyne
Diversity principle
Antenna switching diversity via internal antennas