AJA D10CEA SDI to Component or Composite Converter
SD-SDI to 10-bit component or composite analog video converter
Video outputs can be configured as YPbPr (Betacam or SMPTE/EBU N10), RGB, 1 composite or 1 Y/C (S-Video). The 4 ch analog audio outputs can be wired in a balanced or unbalanced configuration. The 4 audio output channels can be selected as group 1-4 from SMPTE embedded audio. Audio level has 4 settings. Audio and video output connections are available on a 25 pin "D" subminiature connector a break-out cable is supplied. All video/audio configuration is done by external dipswitch selection. This versatile, low-cost, miniature monitoring solution also outputs two re-clocked loop-thru SDI outputs.
Data sheet
- Video Inputs
- SDI
- Outputs
- Componentes
Composite
RGB
S-Video - Max. Video Resolution
- 625i / 525i - SD
- Entradas Audio
- Embebido
- Salidas Audio
- Balanceado
Inputs
• SD-SDI (SMPTE 259M) w/embedded audio
• 1 x BNC
Outputs
• Video:
• YPbPr - SMPTE
• Betacam
• RGB
• NTSC
• PAL
• YC (S-Video)
• 10-bits
• Audio:
• 4 Channel Balanced/Unbalanced, Video/Audio outputs on 25-pin D connector 2 SDI Reclocked loop through, 2 x BNC
• Video, +/-.25db to 5.5 mHz Y
• Audio, +/-.5db to 20 kHz
User Controls
• External Dipswitch
• Video Format
• Pedestal
• H&V blanking
• Audio group 1,2,3,4
• Audio Level, adjustable via switch selection: +24, +18, +15, +12 dBu
• Full Scale Digital
Size (w x d x h)
• 5.8" x 3.1" x 1.0" (147mm x 79mm x 25mm)
Power
• +5VDC Regulated, 4 watts, power supply required, included with purchase