|
Avacab Authorized Dealer |
Featuring a 65mm flat base with a 3/8"-16 threaded hole, the Benro S6Pro fluid video head can efficiently move between compatible tripods and sliders, jibs, monopods and other support equipment. It supports loads up to 13.2 pounds and offers 5+0 counterbalance steps and continuous pan and tilt dragging. It also features independent pan and tilt locks. The tilt range is +90/-75°, and the pan range is 360°.
Some parts of the head are made of magnesium and others of aluminum. Virtually the entire head, including the controls, is made of sturdy but lightweight metal. A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left or right-handed users. A camera plate is included that can be adjusted forward/backward to allow you to find the optimum balance for your camera. A safety lock on the plate ensures that, once mounted, the plate will not come off if it is moved too far in either direction. Two camera screws (1/4"-20 and 3/8"-16) are supplied and can be stored under the camera plate in the head itself, in dedicated slots. For attachment of accessories, there is a 1/4"-20 threaded hole on each side of the head into which the articulated arms can be attached.
Features of Video Head
- Supports a weight of 13.2lb
- 65mm flat base with 3/8 "-16 thread
- Compatible with 65mm flat base tripods and can be mounted directly to most gliders, jibs and monopods
- 5 + 0 counterweight steps
- Continuous dragging of horizontal and vertical movement
- Independent pan and tilt locks
- Tilt range of + 90 / -75 °
- 360 ° panoramic range
- Made of magnesium and aluminum
- Rosette adapters on the left and right side to hold the included panoramic bar
- Sliding chamber plate with safety lock
- 1/4 "-20 and 3/8" -16 camera screws are included and can be stored in dedicated spaces on the top of the head, under the camera plate
- Two 1/4 "-20 threaded holes for accessories