Kiloview N4 enables video sharing up to 1080p60 over an IP network via NDI. This small, portable encoder-decoder is ideal for mounting on a camera with HDMI output to connect to an NDI system. It is an HDMI to NDI encoder and decoder and features an HDMI2.0 input and HDMI2.0 loop through for monitor viewing during NDI transmission, or HDMI 2.0 output during decoding.
The converter supports PTZ control over Ethernet as well as serial (requires optional USB to RS-232/RS-422/RS-485 adapter). It can be powered by the included AC adapter, or connected to a network with PoE. A Tally Light on the front allows your camera to be connected to a Tally system, and a large built-in LED indicates that it is in program or pre-program. The unit has a 1/4"-20 threaded mounting hole on the bottom.
Kiloview N4 enables video sharing up to 1080p60 over an IP network via NDI. This small, portable encoder-decoder is ideal for mounting on a camera with HDMI output to connect to an NDI system. It is an HDMI to NDI encoder and decoder and features an HDMI2.0 input and HDMI2.0 loop through for monitor viewing during NDI transmission, or HDMI 2.0 output during decoding.
The converter supports PTZ control over Ethernet as well as serial (requires optional USB to RS-232/RS-422/RS-485 adapter). It can be powered by the included AC adapter, or connected to a network with PoE. A Tally Light on the front allows your camera to be connected to a Tally system, and a large built-in LED indicates that it is in program or pre-program. The unit has a 1/4"-20 threaded mounting hole on the bottom.
The Kiloview N4 is a bidirectional encoder - decoder. It supports up to 1080p60 video input (encoder) or 1080p60 video output (decoder). This equipment brings your systems into the NDI environment.
The NDI protocol is a high-performance stream creator that allows any user to use real-time video with ultra-low latency in Video-IP networks.
Kiloview N4 supports HDMi input up to 1080p60 and encodes it to Full NDI. You can use the HDMI output to loop through the source. This equipment is designed to adapt to your desired workflows.
This decoder encoder supports 3.5mm analogue audio microphone input/output or embedded audio. It also supports intercom via USB headset between devices directly or with the Kiloview Intercom Server.
With Kiloview's unique technology there is no delay when switching NDI output sources.
In decoder mode, you can preset the NDI sources from number 0 to 9. Connect a USB keyboard and select the output source with a single keystroke.
You can also connect a USB keyboard to control a PTZ camera.
Data sheet
