Streaming 4K/MultiHD 4:2:0 8bit H.264 encoder for Internet transmission and remote production. Inputs 1x 12G-SDI, 3x 3G-SDI.
Matrox Monarch EDGE MDG4/E8/I Streaming encoder 4K/MultiHD 8bit
MAT-MDG4/E8/I
Streaming 4K/MultiHD 4:2:0 8bit H.264 encoder for Internet transmission and remote production. Inputs 1x 12G-SDI, 3x 3G-SDI.
MONARCH EDGE SERIES. ENCODER 4K / MULTI-HD REMOTE PRODUCTION MDG4/E8/I
Streaming 4K/MultiHD 4:2:0 8bit H.264 encoder for Internet streaming and remote production. It offers a broadcast quality of 4 channels 4:2:0 of 8 bits, thanks to its 4 SDI inputs (1x 12G-SDI + 3x 3G-SDI). In HD transmissions, it has enough encoding power to simultaneously generate low-bit-rate 4:2:0 proxy streams for each input, which can be monitored by any device on the network. Its 8-bit H.264 encoding engine keeps data rates exceptionally low without sacrificing quality. If quality is a priority, frame streams of up to 120 Mbps can be delivered. Each input can be transmitted at resolutions up to 1080p60 and the scaling and deinterlacing engines can perform multiple processes on each input, allowing each input to be transmitted at multiple resolutions and bit rates simultaneously, with an encoding latency of only 50ms between the uncompressed video input and the compressed video output, achieving some of the lowest compression latencies on the market.
A variety of streaming protocols are available to Monarch EDGE users. In closed networks, MPEG-2 TS or RTSP streams can be selected for delivery. For cloud-based destinations, or when the network is congested, SRT may be more appropriate. SRT is a new open source format that provides the reliability of the RTMP, while reducing latency, for use on open networks. SRT streams can also be encrypted if security is a concern.
Monarch EDGE offers flexible and future-proof connectivity with 3G, 12G SDI and ST 2110 over 25 GbE. The inputs are auto-detectable and allow a wide range of connectivity for devices such as cameras, switches, vision mixers or routers. It allows you to preview up to 4 simultaneous input views on a single monitor. Monarch EDGE is also capable of accessing 16 channels of embedded audio per input. Up to four stereo pairs per input can be encoded. Alternatively, professional analog stereo audio can be selected from balanced XLR connections.
Monarch EDGE Control Hub is a powerful application that provides remote control management and configuration on all encoders connected to the network from a central location. This powerful software provides authorized users with high-level views of all network devices and allows full access and control from a single, easy-to-use interface. It also allows users to configure how they would like to preview incoming audio sources. Users can choose to monitor one or mute the DisplayPort audio output.
It has an LCD screen on the front allowing the user to quickly access its status and settings. A lockable power connector protects against loss of connection during production. Redundant Ethernet ports (1 GbE) allow you to control the device from one port while sending video from a second port. Users can choose to send the same streams from each port by taking completely separate network paths. Finally, Monarch EDGE's compact design ensures that it can be installed on a fly-pack, a mobile unit, or with a second Monarch EDGE unit in a 1RU space.
Data sheet
- Video Inputs
- SDI
- Outputs
- DisplayPort
- Scaler
- si
- Supported Resolutions
- 1280x720 - HD
1920x1080 - HD
3840x2160 - UHD - Entradas Audio
- Balanceado
Embebido - Salidas Audio
- Balanceado
No Balanceado - Data and Control
- Ethernet
Local - Power
- AC
- Codec / Ficheros
- H264
- Protocols
- MPEG2-TS/UDP
RTMP
RTSP
RTSP/RTP
SRT - Comunes
- Tally
- Rack Units
- 1 RU
- Transmisión
- Ethernet
Part Number |
MDG4/E10/I MDG4/E8/I MDG4/D/I |
Form Factor |
Standalone appliance Rack-mountable: 1U (horizontal) |
Connectivity | |
Video Input |
1x 12G SDI input per ST 2082 3x 3G SDI inputs per ST 425 (Level A mapping only) UHD support using 4 SDI inputs per SMPTE ST 425-5 2x SFP 28 network ports (up to 25 Gbps)* Capture up to four independent 3 Gbps video streams or one 12 Gbps (4Kp60) stream encapsulated per SMPTE ST 2110-10, -20, and -21. Seamless protection (redundancy) according to SMPTE ST 2022-7 *Enabled with future firmware update |
Video Input Resolutions |
2160p at 50, 59.94, 60 fps *Enabled with future firmware update |
Audio Input |
Digital: |
Audio Output |
Analog: |
Confidence Preview |
1x DisplayPort 1.1 Maximum resolution: 1920x1080 |
Multi-Unit Support |
Yes |
Performance | |
Color Space and Chroma Sub-Sampling |
4:2:0 (8-bit and 10-bit) |
Video and Audio Processing | |
Frame Synchronization |
Yes |
Video Scaling |
High Quality multi-tap 10 bit Up/Down Scaler and De-Interlacer |
Video Compositing |
Yes, fixed formats including Picture-in-Picture (PiP), Picture-by-Picture (PbP), quadrant |
Video Deinterlacing |
Yes |
Audio Encoding Format |
AAC-LC |
Audio Sampling Frequency |
48 kHz when digitized from analog source |
Audio Bitrates |
Range from 32 kbps to 256 kbps |
Codec | |
Video Encoding Formats |
H.264/MPEG-4 Part 10 (AVC) |
Encoding Profiles |
Up to High 4:2:2 profile (Hi422P) |
Encoder Bitrates Range |
Video: Up to 120 Mbps |
Encoding Rate Control |
Encoding frame rates offered independent of input frame rates GOP size and structure Variable and constant bit rate support |
Encoding Level |
Up to 5.2 |
Encoding | |
Encoding Capability |
4:2:0 4:2:2 There are a number of additional encoding profiles that can be generated per input. |
Encoding Latency |
Latency as low as 50ms (network transfers and decode operation not included in value) |
Decoding | |
Decoding Capability |
1x 3840x2160 60p |
Decoding Latency |
Latency as low as 50ms (network transfers and encode operation not included in value) |
Decoding Protocols |
SRT RTSP MPEG-2 TS over UDP |
Network | |
Network Standard |
2x RJ45, 100/1000BASE-T Ethernet |
IP Addressing |
IPv4
|
Streaming Protocols |
MPEG-2 TS over UDP (unicast or multicast) RTP/RTSP Native RTP* (unicast or multicast) SRT RTMP * Enabled with future firmware update |
Command and Control |
HTTPS over TCP UPnP (discovery) |
Physical | |
Product Dimensions |
8.53 (L) x 7.45 (W) x 1.68 (H) inches |
Unit Weight |
3.65 lbs / 1,660 g |
Power Supply Unit |
Line voltage: 100-240 V a.c. Power-supply safety: |
Additional Features |
Configurable genlock VANC ancillary data processing (SDI and IP)* Tally * Enabled with future firmware update |
Hardware & Software | |
Hardware Included |
Monarch EDGE appliance Matrox Monarch EDGE power supply Includes IEC-C14 power cord (US, UK, AUS, EUR) |
Accessories (sold separately) |
Monarch Rack Mount Kit* (MRCH/RACK/KIT) Monarch EDGE power supply unit** (PWR/SUP/MDG) Monarch EDGE break out audio cable*** (MDG/AUD/CBL) * Can fit up to two Monarch EDGE units in a 1RU space |
Software |
Monarch EDGE Control Hub—dedicated Windows® application (free download) REST HTTP API* *Contact Matrox representative for availability |
Environmental | |
Operating Conditions |
Temperature: 0 to 40 degrees Celsius Humidity: 20% to 80% non-condensing |
Storage Conditions |
Temperature: -40 to 70 degrees Celsius Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m) Humidity: 5% to 95% non-condensing |
Power Consumption |
Line voltage: 12 volts |
General | |
Supported Operating Systems (software) |
Mac OSX EL Capitan |
EMC/EMI Device Class |
Class A |
EMC/EMI Certifications |
CE (EU) FCC (US) ICES-3 (Canada) KC (Korea) RCM (Aus/NZ) |
Environmental Certifications |
RoHS Directive 2011/65/EU amended by (EU) 2015/863 |
Warranty |
Two-year limited warranty with free online or telephone support |