The Kiloview D350 is a professional hardware decoder device, which can simultaneously decode up to 9 IP Video streams and output them through its 3G-SDI and HDMI output interfaces synchronously, with an output resolution of up to 4Kp60. With the built-in LCD display, users can monitor IP status and decoding parameters in real time. In addition, the D305 offers features such as dynamic source switching, LOGO/background overlay, customized split display of a video stream and other functions.
Excellent decoding performance
The D350 allows simultaneous decoding of up to 16 video channels (resolution dependent*). It allows customizable multi-screen output display, including grid and PIP. With the incredible performance of the D350 and its three output ports (two HDMI 2.0 and one 3G-SDI connection), it is also capable of outputting in three ways: Standalone, combining multichannel video streams, or replicating a single stream to transmit simultaneously to all outputs.
In addition to its outstanding IP Video decoding performance, the Kiloview D350 is also very powerful in audio decoding. With a long list of supported audio formats, including AAC/AAC/MPEG-4/MPEG-2/G.711/Opus/LPCM, it is also capable of switching audio On/Off, audio mixing and audio gain in real time to alternately output via its HDMI ports, SDI port and 3.5mm line-out port.
* Up to 16 channels of 1080P30, 9 channels of 1080P60, 4 channels of 4KP30, 2 channels of 4KP60 or 1 channel of 4Kp60 in Full NDI (NDI Protcol in High Resolution can't be previewed in the GUI)
Compatible with all IP Video protocols
To accommodate different workflows, the D350 decoder supports all protocols, including NDI|HX2, NDI|HX3, Full NDI, SRT, RTMP, RTMPS, HLS, TS over UDP, RTP and RTSP.
The Kiloview D350 uses WebRTC to allow the display of the sources. In the case of Full NDI, this device is able to decode the signal and display it on any of its outputs. But it generally does not allow the display of Full NDI sources in its graphical interface, because WebRTC is not able to process it in real time.
Multiple interfaces, configurable outputs
The Kiloview D350 allows users to freely choose the output interface between 3G-SDI output and two 4K HDMI output, for outputting the same or different synchronized video sources.
*Note: HDMI outputs allow up to 3840x2160@60Hz, SDI output up to 1920x1080@60Hz and can support frame rates such as 59.94/29.97.
Low latency, high quality
The Kiloview D350 guarantees exceptional image quality and low transmission latency, with a decoding delay of less than 200ms and a packet loss rate of less than 10%.
LCD display for real-time status monitoring
As an upgrade of the D300 model, the D350 is equipped with a 0.9-inch LCD display to enhance user experience. With the built-in LCD display, users can easily check the IP and decoding status in real time.
RTMP server support
With the RTMP server, the D350 IP Video decoder can simplify the video decoding workflow by directly accessing a video encoder and outputting video streams via RTMP, without any relay platform.
The D350 is equipped with dual USB interfaces so users can:
- Control a PTZ camera and access a USB keyboard via a USB Type-A port;
- Connect to an extended SSD for local storage through a USB Type-C； port.
- Achieve voice intercommunication with a USB headset.
Free layout: Users can customize the output screen in grid or free layout such as PIP, PBP or POP.
Free resolution: The D350 also allows the output resolution, deinterlacing and frame rate to be adjusted.
16 previews + 9 outputs with dynamic switching
You can choose 9 of the streams for on-screen output from the 16 real-time video streams or preview images on the web page. You can add unlimited video sources, freely select any video source for decoding and perform dynamic switching**
**Full NDI signals can't be previewed from the GUI.
Customization of output background and OSD
D350 users can configure background themes including LOGO, frame and graphic overlay. The PVW window will also display the customized information at the same time.
Audio and Intercom
Real-time end-to-end intercom can be performed via USB headsets connected to the USB port of the D350. For group communication, you can implement the Kiloview Intercom Server (KIS).