Skaarhoj ETH-GPI Link V1- Ethernet to GPIO Interface
The Skaarhoj ETH-GPI Link V1 Ethernet to GPIO interface allows you to control equipment via contact closure, from any network point. Manage your Tallys, trigger switching routines on Blackmagic Design ATEM mixers, control a HyperDeck, switch scopes on a SmartScope Duo and route inputs/outputs on a VideoHub. Setting parameters (single or multiple) for the inputs/outputs is extremely fast, thanks to the drop-down menu structure in UniSketch OS. You can control up to 8 devices at the same time
The ETH-GPI Link V1 controllers offer 8 GPI inputs and 8 GPI outputs, all electrically isolated with relays and optocouplers. The GPOs are implemented with relays short-circuited to GND. The GPIs are implemented with optical isolators short-circuited to GND.
The Skaarhoj ETH-GPI Link V1 Ethernet to GPIO interface allows you, from any network location, to control any equipment that can be managed via contact closure. You can manage your Tallys, trigger switching routines on Blackmagic Design ATEM mixers, control a HyperDeck, change scopes on a SmartScope Duo or route inputs/outputs on a VideoHub.
Setting single or multiple parameters for inputs/outputs is extremely fast, thanks to the drop-down menu structure developed by Skaarhoj in its UniSketch OS management software.
Control up to 8 devices simultaneously
The ETH-GPI Link V1 controllers offer 8 GPI inputs and 8 GPO outputs, all electrically isolated by high quality relays and optocouplers. The GPOs are implemented with GND isolated relays. The GPIs are implemented with optoisolators with GND switching.
SKAARHOJ controllers with GPI inputs accept open collector and relay outputs (connected to GND). The Tally HD15 connector on the NewTek TriCaster TC1 does not provide a direct working signal link to the ETH-GPI, it is necessary to convert the 5V potential to GND.
Hardware specs | |
GPO | 8 |
GPI | 8 |
Product W x D x H (mm) | 80 x 131 x 31 |
Weight (g) | 216 |
Shipping box W x H x D (mm) | 230 x 170 x 50 |
Shipping box Weight (g) | 528 |
Country of Origin | Denmark |
In the box | 12V power supply Micro USB cable |
Connectivity | |
Programming Port | Micro USB |
Networking Port | RJ45 Ethernet |
Power Supply | 12V |
Recommended cables (not in the box) | LAN Cat 6 S/FTP or better |
Operation | |
Power Consumption | 2,52 Watt |
Universal Control | More than 300 compatible devices |