The Kiloview N3 allows video sharing up to 1080p60 over an IP network via NDI. This small and portable encoder-decoder is ideal for mounting on a camera with SDI output to connect to an NDI system. It is a 3G-SDI to NDI encoder and decoder and features 3G-SDI input and output. The output is only active when decoding the NDI signal; when encoding to NDI, the 3G-SDI output is looped through to the SDI input.
The converter supports PTZ control over Ethernet as well as serial (requires optional USB to RS-232/RS-422/RS-485 adapter). It can be powered by the included AC adapter, or connected to a network with PoE. A Tally connector on the front allows your camera to be connected to a Tally system, and a large built-in LED indicates that it is in program or pre-program. The unit has a 1/4"-20 threaded mounting hole on the bottom.
The Kiloview N3 allows video sharing up to 1080p60 over an IP network via NDI. This small and portable encoder-decoder is ideal for mounting on a camera with SDI output to connect to an NDI system. It is a 3G-SDI to NDI encoder and decoder and features 3G-SDI input and output. The output is only active when decoding the NDI signal; when encoding to NDI, the 3G-SDI output is looped through to the SDI input.
The converter supports PTZ control over Ethernet as well as serial (requires optional USB to RS-232/RS-422/RS-485 adapter). It can be powered by the included AC adapter, or connected to a network with PoE. A Tally connector on the front allows your camera to be connected to a Tally system, and a large built-in LED indicates that it is in program or pre-program. The unit has a 1/4"-20 threaded mounting hole on the bottom.
Share video up to 1080p60 over an IP NDI network with Kiloview 3G-SDI/NDI bidirectional converter. This small, portable encoder/decoder unit is ideal for mounting on a camera with an SDI output, so you can connect it to an NDI system. It is a 3G-SDI to NDI encoder/decoder and features one 3G-SDI input and one 3G-SDI output. The output is only active when decoding the NDI signal; when encoding to NDI, the 3G-SDI output loops the SDI input. The NDI signal travels through the RJ45 Ethernet connector.
The converter supports PTZ control (Sony VISCA and Pelco-D/P) over Ethernet as well as serial (requires an optional USB to RS-232/RS-422/RS-485 adapter). You can power the unit using the included power adapter, or without the power adapter when connected to a network with PoE. A tally connector on the front allows your camera to connect to a tally system, and a large built-in LED indicates when the camera is in program or preview. The unit has a 1/4"-20 threaded mounting hole on the bottom that simplifies mounting the unit to a camera.
Data sheet
