Magewell Pro Convert NDI to HDMI - NDI to HDMI converter
You can use the Magewell Pro Convert NDI to HDMI decoder to convert an NDI video stream with embedded audio to an HDMI signal output. It supports resolutions up to 4K60 via the NDI input, and decodes NDI streams up to 2K60 and DCI 4K at 15fps via the HDMI output. The device can be powered via an included USB power adapter or via PoE using the RJ45 port.
A web interface allows web configuration from a wide variety of browsers of parameters such as device name, source name, NDI and EDID identifiers, and other settings. It has a 1/4"-20 thread for camera mounting and can be used in the studio or on location thanks to a compact and durable design.
![]() |
Avacab Official Dealer |
Video signal converter that offers the possibility of converting a video stream in NDI format to an HDMI 2.0 video output that supports signals up to 4K. Through the 10/100/1000Mbps ethernet connection, the equipment receives the NDI stream in addition to supporting POE power. It has a USB 2.0 port for control and power of the equipment in addition to a USB 3.0 port that supports the connection of peripherals (mouse and / or keyboard) to control the configuration of the equipment.
It offers the possibility of being subject or installed in different configurations thanks to its 1/4" hole. It also has "Menu" and "Select" control buttons to access the equipment configuration menu.
Data sheet
- Protocols
- HLS
HTTP
MPEG2-TS/RTP
MPEG2-TS/TCP
MPEG2-TS/UDP
NDI|HX
RTMP
RTSP - Video Inputs
- HDMI
- Max. Video Resolution
- 625i / 525i - SD
1280x720 - HD
1920x1080 - HD
2048x1080 - 2K
3840x2160 - UHD
4096x2160 - 4K DCI - Data and Control
- Ethernet
USB - Power
- DC
PoE - Codec / Ficheros
- H.265 / HEVC
H264
![]() |
Avacab Official Dealer |
Supported Web Browser (tested)
- Microsoft Internet Explorer 11
- Microsoft Edge
- Mozilla Firefox version 61 and above
- Google Chrome version 49 and above
- Apple Safari 11.1 and above
- Opera 55.0.2994.44 and above
Output Interfaces
- HDMI
- DVI-D 1.0
- HDMI 1.4
- HDMI 2.0
Storage Interface
- SD Card (functions to be developed)
Screw Mounting Hole
- ¼–20 mounting hole
Network Interfaces
- 10/100/1000Mbps Ethernet
- IEEE 802.3af PoE
USB Interface
- USB2.0 Type B
- 5V/2.1A power supply
- USB RNDIS/ECM
- USB3.0 Type A
- Support for connecting peripherals (keyboard and/or mouse) to customize the video and audio settings
Control Buttons
- MENU: press to display the menu, or cycle through the options
- SELECT: press to display the menu, enter current option, or confirm the selection
HDMI Output Features
- Support for up to 4096x2160 60fps HDMI output
- Support for 96KHz 16bits 8-channel audio streams
- Support for delivering videos at the preferred video format according to the EDID of the connected monitor
Stream Decoding Features
- Support for decoding full NDI® and NDI HX in NDI 4.x
- Support for decoding streams of NDI, RTSP, HTTP, HLS, RTMP Pull/Push and MPEG-TS over UDP/SRT/RTP
- Support for decoding videos in H.264 and H.265 format
- Support for decoding AAC/MP3 audios
- Support for up to 150M pixels/s decoding
- When receiving 2K NDI® stream, the device could decode and convert it to 2K 60fps
- When receiving 4K NDI® stream, the device could decode and convert it to 4K 15fps
- Support for modifying configurations using the Web UI or the Options menu
- Setting Video OSD composition, including
- Source name & resolution
- Tally indicators
- Audio meter
- Audio meter scale
- Center cross
- Safe area
- Video scaling, frame rate and aspect ratio conversion
- Video color format conversion
- Auto or manual selection of input color format
- Support YUV BT.601, YUV BT.709 color formats
- Video vertical and mirror flip
- Remote controlling the PTZ device connected to the video source
- Setting audio gain, sample rate and channels
Device Name
- Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’.
- Support for setting board-index, from 0 to F, through the on-board rotary switch
Firmware Upgrade
- Support for manual update using Web UI
LED Indicator
- Power LED status indicator
- On: power connected
- Off: power unconnected
- Decode LED status indicator
- On: decoding in progress
- Blinks: decoding error
- Off: source unselected
Form Factor
- 100.9mm (L) x 60.2mm (W) x 23.3mm (H)
Accessories
- USB 2.0 A to B Cable
- 5V/2.1A power adaptor
- L-bracket
Power Consumption
- 5V max current: ~1.1A
- Max power consumption: ~5W
Working Environment
- Operating temperature: 0 to 45 deg C
- Storage temperature: –20 to 70 deg C
- Relative Humidity: 5% to 90% non-condensing