- On sale!
The Magewell 1-channel NDI Pro Convert SDI TX encoder allows you to convert an SDI signal with embedded audio into an NDI stream. It supports resolutions up to 2048x1080 at 60p on both the input and NDI output. It is powered through the included power adapter or by PoE using the NDI port. It has 1/4"-20 thread for camera mounting and can be used in the studio or outdoors thanks to a compact and robust design. It has a PTZ+tally shared mini-DIN port for connecting Tally lights or controlling PTZ cameras from NDI. A Tally light accessory is included.
A web interface allows assigning device name, source name and other settings. The encoder also has an integrated SD card slot, but this will be active in future releases. Future firmware updates will also be accessible via the web interface.
 |
| Official Dealer |
Magewell Pro Convert SDI Tx - SDI to NDI converter
MAG-64060-AIO
The Magewell 1-channel NDI Pro Convert SDI TX encoder allows you to convert an SDI signal with embedded audio into an NDI stream. It supports resolutions up to 2048x1080 at 60p on both the input and NDI output. It is powered through the included power adapter or by PoE using the NDI port. It has 1/4"-20 thread for camera mounting and can be used in the studio or outdoors thanks to a compact and robust design. It has a PTZ+tally shared mini-DIN port for connecting Tally lights or controlling PTZ cameras from NDI. A Tally light accessory is included.
A web interface allows assigning device name, source name and other settings. The encoder also has an integrated SD card slot, but this will be active in future releases. Future firmware updates will also be accessible via the web interface.
|
| Official Dealer |
€421.00
421,00 €
Con IVA
|
| Avacab Official Dealer |
A signal converter that converts an SDI signal with embedded audio to an NDI stream. It supports resolutions of up to 2048x1080 at 60p in both interfaces, input and output. The device can be powered via an included power adapter or via PoE using the NDI port. It has a 1/4"-20" thread for mounting the camera and can be used in studio or field thanks to its compact and robust design. There is also a shared PTZ+tally mini-DIN port for connecting tally lights or configuring NDI-based PTZ camera control. A counting light accessory is included. A complementary web interface allows the device name, font name and other parameters to be assigned.
Features of SDI to NDI Converter Magewell Pro Convert SDI TX
- Convert SDI signal to NDI Stream
- Supported Embedded Audio
- Up to 2048x1080 at 60p Input/Output
- Power adapter + PoE
- 1x BNC input
- USB 2.0 for power and data transfer
- 10/100/1000 Mbps Ethernet
- Power interface - DC+5V
- PTZ interface - Mini-DIN-8
- NDI coding
- Firmware upgradeable
- LED Indicators
- Tally
Data sheet
- Video Inputs
- SDI
- Supported Resolutions
- 625i / 525i - SD
1280x720 - HD
1920x1080 - HD
2048x1080 - 2K - Data and Control
- Ethernet
USB - Power
- DC
PoE - Protocols
- NDI|HX
- Comunes
- Tally
- Transmisión
- NDI
|
| Avacab Official Dealer |
Supported Web Browser
- Microsoft Internet Explorer 11
- Microsoft Edge
- Mozilla Firefox version 61 and above
- Google Chrome version 49 and above
- Apple Safari 11.1 and above
- Opera 55.0.2994.44 and above
Supported Software
- OBS
- XSplit
- vMix
- VidBlasterX
- Wirecast
- streamstar SW
- mimoLive
- Any other NewTek NDI-enabled encoding or streaming software
Input Interface
- BNC
- SD/HD/3G SDI
Storage Interface
- SD Card (functions to be developed)
PTZ + TALLY Control
- Mini-DIN–8 jack
Mounting Hole
- ¼–20 mounting hole
Network Interface
- 10/100/1000Mbps Ethernet
- IEEE 802.3af PoE
USB Interface
- USB2.0 Type B
- 5V/2.1A power supply
- USB RNDIS/ECM
Input Feature
- Support input resolution at up to 2048x1080 60fps
SDI Specific Features
- Integrated cable equalizer extending the cable length as follows:
- up to 330m for SD-SDI signals
- up to 230m for HD-SDI signals
- up to 180m for 3G-SDI signals
- Support for SD/HD/3Ga/3Gb/3Gb-DL/3Gb-DS (SMPTE 2081) standards
- Support for 2K (2048x1080) mode
- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
- Support for 8/10/12-bit color depth
- Support for extraction of SMPTE 352 payload identifier
- Support for up to 16 (mono) input and 16 output audio channels
- Support for extraction of audio formation information & channel status data
- Limited support for capture of one of dual link interfaces:
- YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
- YCbCr 4:4:4 10-bit: captured as 4:2:2
- RGB 4:4:4: R/B sub-sampled
NDI® Output Format
- Support for 4:2:2 8-bit output
- Support for up to 2048x1080 60fps output resolution
- Support for NDI 4.1
Video Processing Features
- Support capture resolutions up to 2048x1080
- Video brightness, contrast, saturation, hue adjustment
- Video de-interlacing
- Top field only
- Bottom field only
- Video aspect ratio conversion
- Auto or manual selection of output aspect ratio
- Video color format conversion
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of output color format, quantization range & saturation range
- Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
- Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
- Support for Limited or Full quantization range
- Support for Limited, Full & ‘Extended gamut’ saturation range
- Video frame rate conversion
- Video mirror flip
NDI® Source Name
- Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’.
- Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’.
- Support for setting board-index, from 0 to F, using the on-board rotary switch
Firmware Upgrade
- Support for manual update using Web UI
LED Indicator
- Status LEDs indicate the working status of the device:
- Power supply: on/off
- Input signal: locked/unlocked
Form Factor
- 100.9mm (L) x 60.2mm (W) x 23.3mm (H)
Accessories
- USB 2.0 A to B Cable
- 5V/2.1A power adaptor
- Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)
- Tally lights
- L-bracket
- LED matrix panel (optional)
Power Consumption
- 5V max current: ~1.5A
- Max power consumption: ~6W
Working Environment
- Operating temperature: 0 to 45 deg C
- Storage temperature: –20 to 70 deg C
- Relative Humidity: 5% to 90% non-condensing