Magewell Pro Convert 12G SDI 4K Plus - SDI to NDI encoder

MAG-64090

Encoder of video streams over 12G-SDI connection to low latency NDI protocol. Supports resolutions up to 4K at 60 fps.

Magewell

€959.00
- Check availability
Quantity
Add to wishlist
Add to compare
Available

Request a product query

Magewell

Encoder full NDI® streams from a single-link 12G-SDI input, while new decoders convert NDI or streaming inputs to 1080p SDI output. The Magewell Pro Convert 12G SDI Plus encoder is plug and play, ingesting up to 4K video at 60 frames per second over a 12Gbps SDI interface and converting it to full NDI streams with extremely low latency. The encoder supports up to 16 channels of embedded audio, while automatic input format detection and DHCP-based network configuration eliminate the need for manual configuration. A loop-through SDI connection allows the input signal to be sent simultaneously to additional displays or equipment without the need for external splitters or routers, allowing sources to be easily utilised in new IP workflows without disrupting the existing traditional video infrastructure.

Features of Magewell 64090 Pro Convert 12G SDI 4K Plus encoder

  • Connects existing source equipment into NDI-enabled, IP-based media networks
  • Supports inputs up to 4K at 60fps with 16 channels of embedded audio
  • Plug-and-play ease of use with automatic input format detection and DHCP network configuration

Logo-Garantia-2

Rohs_logo.gif

Data sheet

Video Inputs
SDI
Outputs
NDI|HX
SDI
Supported Resolutions
625i / 525i - SD
1280x720 - HD
1920x1080 - HD
2048x1080 - 2K
3840x2160 - UHD
4096x2160 - 4K DCI
Entradas Audio
Embebido
Salidas Audio
Embebido
Datos y Control
Ethernet
USB
Power
PoE
USB
Comunes
Tally
Protocols
NDI|HX

Magewell

Input & Loop through Features

Max video input & loop through: 4096x2160 60fps. Supported resolutions include:

  • 4096x2160p/3840x2160p/2048x1080p/1920x1080p
  • 23.98/24/25/29.97/30/47.95/48/50/59.94/60
  • 2048x1080i/1920x1080i 25/29.97/30/47.95/48/50/59.94/60
  • 1280x720p 50/59.94/60
  • 720x576 25p/50i (PAL SD)
  • 720x480 29.97p/59.94i (NTSC SD)

Support RGB/RGBA/YUV/YUVA signals with 10/12-bit color depth
Support RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support RGB, YUV BT.601/709/2020 video input
16-channel SDI embedded audio inputs
SD/HD/3G/6G/12G-SDI BNC input & loop through
Support SD (ST 259)/HD (ST 292)/3Ga (ST 425)/3Gb (ST 425)/3Gb-DL (ST 425)/3Gb-DS (ST 425)/6G (ST 2081)/12G (ST 2082) SDI standards
Receive 12G-SDI transmitted up to 30m (98ft), 6G-SDI 80m (262ft)

NDI® Encoding Features

Encoding Full NDI real-time stream at up to 4096x2160 60fps 4:2:2 8-bit
Output the same resolution as input or any custom resolution. Typical outputs include:

  • 4096x2160p/3840x2160p/2048x1080p/1920x1080p 23.98/24/25/29.97/30/47.95/48/50/59.94/60
  • 2048x1080i/1920x1080i 25/29.97/30/47.95/48/50/59.94/60
  • 1280x720p 50/59.94/60

Output frame rate same as the original, 1/2, 1/3 or 1/4 of input frame rate
Encoding 16-channel NDI-embedded audio
Support NDI 4.x

Web UI ManagementProvide comprehensive information regarding the device and signals in real-time
Allow to configure how an input is processed and encoded, including deinterlacing, up/down scaling, frame rate, aspect ratio, as well as the network connection
Update firmware
Support USB RNDIS/ECM
Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers
Provide HTTP APIs
On-board Control Buttons16 Position Rotary DIP Switch: set board-index from 0 to F
PTZ ControlControl PTZ cameras using protocols of VISCA, Visca UDP, Visca UDP2rs232, PELCO-P and PELCO-D via NDI
Mini-DIN–8 jack (shared with Tally light)
Network Interfaces10/100/1000Mbps Ethernet
IEEE 802.3af PoE
USB Interface

USB2.0 Type B

  • 5V/2.1A power supply
  • USB RNDIS/ECM
Supported ProductsNDI Studio Monitor
OBS
vMix
Any other NDI-enabled product
LED IndicatorsStatus LEDs indicate:
  • Power supply: on/off
  • Tally: preview/program
  • Input signal: locked/unlocked
  • Loop through signal: on/off
Form Factor117.5mm (L) x 66.7mm (W) x 23.4mm (H)
AccessoriesUSB 2.0 A to B cable
5V/2.1A power adaptor
Mini-DIN 8 breakout cable
Tally light
L-bracket
Screw Mounting Hole¼–20 threaded hole
Power Consumption5V max current: ~1.65A
Max power consumption: ~8.5W
Working EnvironmentOperating temperature: 0 to 45 deg C
Storage temperature: –20 to 70 deg C
Relative humidity: 5% to 90% non-condensing
close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password