Magewell Pro Convert NDI to SDI - NDI to SDI decoder

  • On sale!
MAG-64150 AIO

Use the Magewell Pro Convert for NDI to SDI decoder to convert an NDI stream with embedded audio to an SDI output signal. This converter supports up to 2K60 over NDI and decodes at resolutions up to 1080p60 on the 3G-SDI output. Designed to link baseband equipment with IP-based multimedia networks, this converter supports full-bandwidth NDI and high-efficiency NDI|HX modes. Supported streaming protocols are SRT, RTSP, RTMP, UDP, RTP, HLS and HTTP.

Pro Convert's web user interface supports a wide variety of web browsers and allows web configuration of settings such as device name, source name, NDI and EDID identifiers, and other settings. The Pro Convert NDI to SDI features a 1/4"-20 mounting thread and can be powered via the included USB power adapter or via PoE using the RJ45 port.

Magewell - Avacab official Magewell dealer - All Magewell products at Avacab

En Stock

Request a product query



Video signal converter that offers the possibility of converting a video stream in NDI format to a 3G-SDI video output that supports signals up to 1080@60p. Through the 10/100/1000Mbps ethernet connection, the equipment receives the NDI stream in addition to supporting POE power.

It offers the possibility of being subject or installed in different configurations thanks to its 1/4" hole.



logo rohs

Data sheet

Video Inputs
Supported Resolutions
625i / 525i - SD
1280x720 - HD
1920x1080 - HD
Data and Control



Output Features

  • Max output: 1920x1080p60. Supported output formats are:
    • 1920x1080p 23.98/24/25/29.97/30/50/59.94/60
    • 1920x1080i 50/59.94/60
    • 1280x720p 23.98/24/25/29.97/30/50/59.94/60
    • 720x576i50
    • 720x480i59.94
  • Support YUV BT.601, YUV BT.709 signals
  • Support 48KHz 8-channel audio output
  • SD/HD/3G-SDI BNC output
  • Support SD (ST 259)/HD (ST 292)/3Ga (ST 425)/3Gb (ST 425)/3Gb-DL (ST 425)/3Gb-DS (ST 425) SDI standards
  • Output 3G-SDI signal and transmitted distance greater than 100m (328ft)
Decoding Features

  • Decoding up to 2Kp60 streams of Full NDI, NDI|HX, NDI|HX2, RTSP, HTTP, HLS, RTMP Pull/Push, and MPEG-TS over UDP/SRT/RTP protocols
  • H.264/H.265 video decoders
  • AAC/MP3 audio decoders
  • Support NDI 4.x
Web UI Management

  • Provide comprehensive information regarding the device and decoded signals in real-time
  • Allow to configure how a signal is processed and decoded, including:
    • OSD setting, deinterlacing, resolution, frame rate, AR conversion
    • audio gain, sample rate and audio channel mapping
    • network connection
  • Update firmware
  • Support USB RNDIS/ECM
  • Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers
  • Provide HTTP APIs
On-board Control Buttons

  • MENU: press to display the menu, or cycle through the options
  • SELECT: press to display the menu, enter current option, or confirm the selection
  • 16 Position Rotary DIP Switch: set board-index from 0 to F
Network Interfaces

  • 10/100/1000Mbps Ethernet
  • IEEE 802.3af PoE
USB Interfaces

  • USB2.0 Type B
    • 5V/2.1A power supply
  • USB3.0 Type A
    • Connecting peripherals (keyboard and/or mouse) to set up device
LED Indicators

  • Power LED status indicator
    • On: power connected
    • Off: power unconnected
  • Decode LED status indicator
    • On: decoding
    • Blinks: decoding error
    • Off: source unselected
Form Factor

  • 100.9mm (L) x 60.2mm (W) x 23.3mm (H)

  • USB 2.0 A to B cable
  • 5V/2.1A power adaptor
  • L-bracket
Screw Mounting Hole

  • ¼–20 threaded hole
Power Consumption

  • 5V max current: ~1.05A
  • Max power consumption: ~5.5W

Working Environment

  • Operating temperature: 0 to 40 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative humidity: 5% to 90% non-condensing

You might also like

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password