Magewell Pro Convert SDI 4K Plus - SDI to NDI converter
The Magewell Pro Convert SDI 4K Plus converts SDI video input signal from professional cameras to NDI stream. It features SDI input with loop through and 8 channels of embedded audio. Supports SDI up to DCI 4K 4096x2160 at 30fps. The Gigabit Ethernet port provides NDI output up to 4K 4096x2160 8-bit 4:2:2 at 30fps. The NDI stream can be sent to NDI compatible encoding or streaming applications such as OBS, XSplit, vMix, Wirecast and others over Ethernet. The mini DIN-8 tally/PTZ port provides tally input. LEDs indicate power, output and input signal status.
The unit is powered by 5V to USB 2.0 adapter or PoE. The Pro Convert is managed with a web user interface for configuring settings and performing firmware updates via the USB port. Includes USB cable, 5V adapter, mini DIN-8 cable and L-bracket for mounting.
Avacab Official Dealer |
SDI up to 6G, with embedded audio, to NDI signal converter. It transforms the SDI signal coming from any camera or SDI player up to 4K@30p into a NDI 3.x stream that can be used in any compatible device. In addition, using the appropriate connection cable, you can control a PTZ camera via RS232 and send it its corresponding Tally.
Features of SDI to NDI converter Magewell Pro Convert SDI 4K PLUS
Supported Web Browser
- Microsoft Internet Explorer 11
- Microsoft Edge
- Mozilla Firefox version 61 and above
- Google Chrome version 49 and above
- Apple Safari 11.1 and above
- Opera 55.0.2994.44 and above
Supported Software
- OBS
- XSplit
- vMix
- VidBlasterX
- Wirecast
- streamstar SW
- mimoLive
- Any other NewTek NDI-enabled encoding or streaming software
Input Interfaces
- BNC - SD/HD/3G/6G SDI
Loop-through Interface
- BNC - SD/HD/3G/6G SDI
Storage Interface
- SD Card (functions to be developed)
PTZ + TALLY Control
- Mini-DIN–8 jack
Screw Mounting Hole
- ¼–20 mounting hole
Network Interfaces
- 10/100/1000Mbps Ethernet
- IEEE 802.3af PoE
USB Interface
- USB2.0 Type B
- 5V/2.1A power supply
- USB RNDIS/ECM
Input feature
- Support for up to 4096x2160 input resolution
SDI Specific Features
- Integrated cable equalizer supporting cable lengths up to 150M for 3G-SDI signals
- Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS/6G (SMPTE 2081) standards
- Support for 2K (2048x1080) & 4K (4096x2160) mode
- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
- Support for 10/12-bit color depth
- Support for extraction of SMPTE 352 payload identifier
- Support for up to 16 (mono) audio channels
- Support for extraction of audio formation information & channel status data
- Limited support of 3Gb-DS: only the first stream can be captured
- Limited support for capture of the first link of dual link interfaces:
- YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
- YCbCr 4:4:4 10-bit: captured as 4:2:2
- RGB 4:4:4: R/B sub-sampled
NDI® Output Format
- Support for 4:2:2 8-bit output
- Support for up to 4096x2160 input resolution
- Support for NDI 3.x
Video Processing Features
- Support for capture resolutions up to 4096x2160
- Video brightness, contrast, saturation, hue adjustment
- Video de-interlacing
- Top field only
- Bottom field only
- Video aspect ratio conversion
- Auto or manual selection of output aspect ratio
- Video color format conversion
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of output color format, quantization range & saturation range
- Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
- Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
- Support for Limited or Full quantization range
- Support for Limited, Full & ‘Extended gamut’ saturation range
- Video frame rate conversion
- Video mirror flip
NDI® Source Name
- Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’.
- Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’.
- Support for setting board-index, from 0 to F, through the on-board rotary switch
Firmware Upgrade
- Support for manual update using Web UI
LED Indicator
- Status LEDs indicate the working state of the device:
- Power supply: on/off
- Tally: preview/program
- Input signal: locked/unlocked
- Loopthrough signal: loopthrough connected and signal detected/undetected
Form Factor
- 117.5mm (L) x 66.7mm (W) x 23.4mm (H)
Accessories
- USB2.0 A to B Cable
- 5V/2.1A power adaptor
- Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)
Power Consumption
- 5V max current: TBD
- Max power consumption: TBD
Working Environment
- Operating temperature: 0 to 45 deg C
- Storage temperature: –20 to 70 deg C
- Relative Humidity: 5% to 90% non-condensing
Data sheet
- Protocols
- NDI|HX
- Video Inputs
- SDI
- Outputs
- NDI|HX
- Max. Video Resolution
- 625i / 525i - SD
1280x720 - HD
1920x1080 - HD
2048x1080 - 2K
3840x2160 - UHD
4096x2160 - 4K DCI - Entradas Audio
- Embebido
- Data and Control
- Ethernet
USB - Power
- DC
PoE - Comunes
- Tally
- Transmisión
- NDI
Avacab Official Dealer |
Supported Web Browser
- Microsoft Internet Explorer 11
- Microsoft Edge
- Mozilla Firefox version 61 and above
- Google Chrome version 49 and above
- Apple Safari 11.1 and above
- Opera 55.0.2994.44 and above
Supported Software
- OBS
- XSplit
- vMix
- VidBlasterX
- Wirecast
- streamstar SW
- mimoLive
- Any other NewTek NDI-enabled encoding or streaming software
Input Interfaces
- BNC
- SD/HD/3G/6G SDI
Loop-through Interface
- BNC
- SD/HD/3G/6G SDI
Storage Interface
- SD Card (functions to be developed)
PTZ + TALLY Control
- Mini-DIN–8 jack
Screw Mounting Hole
- ¼–20 mounting hole
Network Interfaces
- 10/100/1000Mbps Ethernet
- IEEE 802.3af PoE
USB Interface
- USB2.0 Type B
- 5V/2.1A power supply
- USB RNDIS/ECM
Input feature
- Support for up to 4096x2160 30fps input resolution
SDI Specific Features
- Integrated cable equalizer extending the cable length as follows:
- up to 180m for SD-SDI signals
- up to 180m for HD-SDI signals
- up to 150m for 3G-SDI signals
- up to 100m for 6G-SDI signals
- Support for SD/HD/3Ga/3Gb/3Gb-DL/3Gb-DS/6G (SMPTE 2081) standards
- Support for 2K (2048x1080) & 4K (4096x2160) mode
- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
- Support for 10/12-bit color depth
- Support for extraction of SMPTE 352 payload identifier
- Support for up to 16 (mono) audio channels
- Support for extraction of audio formation information & channel status data
- Limited support of 3Gb-DS: only the first stream can be captured
- Limited support for capture of the first link of dual link interfaces:
- YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
- YCbCr 4:4:4 10-bit: captured as 4:2:2
- RGB 4:4:4: R/B sub-sampled
NDI® Output Format
- Support for 4:2:2 8-bit output
- Support for up to 4096x2160 60fps output resolution
- Support for NDI 4.1
Video Processing Features
- Support for capture resolutions up to 4096x2160
- Video brightness, contrast, saturation, hue adjustment
- Video de-interlacing
- Top field only
- Bottom field only
- Video aspect ratio conversion
- Auto or manual selection of output aspect ratio
- Video color format conversion
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of output color format, quantization range & saturation range
- Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
- Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
- Support for Limited or Full quantization range
- Support for Limited, Full & ‘Extended gamut’ saturation range
- Video frame rate conversion
- Video mirror flip
NDI® Source Name
- Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’.
- Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’.
- Support for setting board-index, from 0 to F, through the on-board rotary switch
Firmware Upgrade
- Support for manual update using Web UI
LED Indicator
- Status LEDs indicate the working state of the device:
- Power supply: on/off
- Tally: preview/program
- Input signal: locked/unlocked
- Loopthrough signal: loopthrough connected and signal detected/undetected
Form Factor
- 117.5mm (L) x 66.7mm (W) x 23.4mm (H)
Accessories
- USB 2.0 A to B Cable
- 5V/2.1A power adaptor
- Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)
- L-bracket
- LED matrix panel (optional)
Power Consumption
- 5V max current: ~1.5A
- Max power consumption: ~7W
Working Environment
- Operating temperature: 0 to 45 deg C
- Storage temperature: –20 to 70 deg C
- Relative Humidity: 5% to 90% non-condensing