Benro A38TDS2 Aluminum Monopod with 3-Leg base up to 5.5lb

Benro A38TDS2 Aluminum Monopod with 3-Leg base up to 5.5lb

BNR-A38TDS2

This Benro A38FDS2 Series 3 aluminum monopod includes the 3-Leg locking base and S2 video head to provide you with a versatile mounting system for photo or video cameras. Capable of holding up to 5.5 pounds and extending up to 67.5 ", the removable base provides three solid points of contact with the ground.
   

Benro - Benro tripods for video cameras on Avacab Audiovisuales - All Benro products at Avacab
Authorized Dealer
€131.00 Tax excluded
158,51 € Con IVA
- Check for Delivery Time
Quantity
- Check Availability

Benro - Benro tripods for video cameras on Avacab Audiovisuales - All Benro products at Avacab
Avacab Authorized Dealer


 
 
 
 
  
This Benro A38FDS2 Series 3 aluminum monopod includes the 3-Leg locking base and S2 video head to provide you with a versatile video or still camera mount system. Capable of holding up to 5.5 pounds and extending up to 67.5 ", the detachable base provides three solid points of contact with the ground, and acts as a mini tripod. A ball joint on the base allows you to gently rotate and tilt your camera, And it can be locked so that it can rotate with the head independently.

The base can be replaced with the included rubber foot for standard monopod use. All four leg sections are secured by twist locks, and folds up to 24.8" for transport in the included carrying case. The S2 is a compact video head with 360° rotation. It features locking levers for Independent pan and tilt, and a quick-release slide plate helps balance the camera.
  

Features of Benro S2 head

  • Weighing just 0.8 pounds
  • Supporting cameras up to 5.5 pounds.
  • 3/8"-16 threaded female 60 mm magnesium flat base
  • Separate pan and tilt lock levers
  • Vertical tilt ange of +85/-85°
  • Panning range of 360°
  • Made of magnesium and aluminum
  • Rosette adapters on the left and right side to hold the included panning rod
  • Sliding chamber plate with safety lock
  • 1/4 "-20 and 3/8" -16 camera screws are included and can be stored in dedicated spaces on the top of the head, under the camera plate
  • Two 1/4 "-20 threaded holes for accessories

Features of Benro monopod

  • Capable of holding up to 39.7 pounds
  • 3-leg base with ball joint, capable of locking as well as folding for transport
  • Four leg sections attach with twist locks and folds down
  • Height range from 21.3 to 64" with head mounted
  • 3/8"-16 mounting screw

 

Data sheet

Max. Payload
From 2.2lb to 6.6lb
Material
Aluminum
Benro - Benro tripods for video cameras on Avacab Audiovisuales - All Benro products at Avacab
Avacab Authorized Dealer




  
Specifications
  

Chamber plate

  • Camera plate type: QR4
  • Camera mounting screw: 1 x 1/4 "-20 Male and 1 x 3/8" -16 Male
      

Tripod platform

  • Base mounting: 3/8 "-16 thread

  
Pan and Tilt

  • Drag control: Pan: Fixed and Tilt: Fixed
  • Vertical tilt: + 85 ° to -85 °
  • Pan range: 360 °
  • Independent pan lock: Yes
  • Independent tilt lock: Yes
       

General

    • Load capacity: 5.5 lb / 2.5 kg
    • Maximum height: 64 "/ 171 cm
    • Folded length: 21.3 "/ 54 cm
    • Counterweight: Fixed
    • Spirit level: 1
    • Base diameter: 2.4 "/ 60 mm
    • Operating temperature: -4 to 140 ° F / -20 to 60 ° C
    • Dimensions: 3.5 "/ 90 mm
    • Weight: 0.8 lb / 0.4 kg

You might also like

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password