Blackmagic ATEM 2M/E Advanced panel - Control surface


Blackmagic ATEM video mixer control panel with two mix banks, 20 input buttons and 2 control screens. Customizable LCD labels


- Check availability

Request a product query



Control surface for Blackmagic ATEM video mixers with 2 M/E banks and LCD displays for fully customized control and configuration.

This model is large enough to perfectly match the features of the ATEM Constellation switch. It has 2 M/E rows with 20 input buttons per row and 2 independent system control LCDs for each row. This massive panel includes LCDs for custom labeling of each button in each row.

Among its main features are the control screens, which include a numeric keypad with buttons for each function and different controls. It offers a multitude of parameters available for each composition, different types of transitions, digital visual effects and colour generators. In addition, it is possible to convert formats, configure the simultaneous display function and assign inputs to different buttons. There is even the opportunity to save up to ten settings, plus four completely independent control systems.

By selecting the transition types, the control LCD will display the options for that transition, so you can change your settings without having to navigate through complex menus, all available instantly. It offers a wide variety of transition styles. In addition to the standard SMPTE wipes included and these can have edge smoothing for smoother transitions than a simple cross dissolve. Immersive transitions create a colored immersion effect and truly innovative effects can be created. DVE transitions use the DVE to create crazy movements where the entire image in the foreground moves. The T-bar fader even allows you to manually position the transition for full control.

Perfect for positioning the DVE for custom PiP effects by including a joystick, the soft controls and menus on the LCD screen can also be used to adjust the position and size of the DVE as well as other DVE features and lighting and shadow effects. The DVE can be configured to fly graphics in a frame or to select any of the pre-programmed "push and squeeze" transitions. It also has the ability to record custom macros and run them at the press of a button. In this way, there is no need for additional computer equipment, as the same panel used to switch between the different cameras also allows the macros to be activated. Under each button, the macro assigned to it is indicated.

Blackmagic ATEM 2M/E Advanced Panel features

  • Presents the workflow of traditional transmission
  • Includes all the features of the large switches.
  • Up to 20 separate input buttons with custom labels and colors
  • Transition control for quick selection of transition styles
  • Quick selection of transition styles from the system control LCDs
  • Supports DVE transitions and joystick positioning
  • Includes fader bar for manual control of transitions
  • Includes a separate LCD system control screen for each M/E row
  • Supports direct macro firing on each selected bus


Data sheet

Datos y Control





4 x 10/100/1000 (Base-T) with branched output for control panels and additional computer equipment.

Device update

1 x USB-C for upgrading the internal operating system.

ATEM 2 M/E Advanced Panel

Product Specifications

Mixing and effects banks


Direct crossing points


Additional crossing points


Buttons for crossing points

Tricolor LED

Crossing point signs

6-row LCD display with 24 characters

Transition selectors

2 X BKG, KEY 1-4.

On-air signal indicators


Power status indicators

Not available

Transition Selectors (DSK)

Auto, Cut, Tie/Preview x 2

Transition preview


Duration indicators

Through the main menu

LCD Displays


Options control

20 buttons x 2

Macro buttons

2 x 20

Playback controls


Destination bus


Source bus


Transition lever




Numeric keypad


IT Support

Sotfware applications

ATEM Software Control Panel.

Operating Systems

Mac icon

Mac 10.14 Mojave,
Mac 10.15 Catalina or later

Windows Icon

Windows 10 64-bits.

Energy Requirements

Power supply

2 internal power supplies x 100-240 V AC.

Redundant power supply system



150 W

Physical Specifications

ATEM 2 M/E Advanced Panel

Environmental Specifications

Operating temperature

0 °C to 40 °C (32 °F to 104 °F)

Storage temperature

-20 °C to 60 °C (-4 °F to 140 °F)

Relative humidity

Up to 95%.

Items Included

ATEM 2 M/E Advanced Panel

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password