High-performance digital video extender and splitter (transmitter) with dual HDMI input allowing you to place your hardware in a secure environment with local time control. The ALDV104T uses an uncompressed video system in which each frame is sent without loss at resolutions up to 1920x1200@60Hz (WUXGA) including resolutions of 1080p, 720p and 480p; it supports up to 8 channels of HDMI audio.
The unit determines if the entire system is working properly and if the video is visible on the monitors. It can detect if video is present in the player and if the monitor cables are connected and the monitor is turned on. This information is available through an IP socket, allowing remote diagnostics and integration into content management systems. It can be configured to detect the presence of a video sequence at the input and automatically switch to the second video input if the primary fails.
The web interface is secured by HTTP digest authentication (RFC 2617) with username and password according to the requested information. Video, audio and power pass through a single CATx cable, providing up to 50 meters of extension. Distance may depend on CATx cable types. Highly energy efficient as no external power supplies are required. The receivers are designed to be highly efficient, using less than one-eighth of the power required by competing systems. Power is supplied along the CATx cable, so the supporting infrastructure required is minimal.
The warranty can be extended up to 5 years with product registration.
Features of the extender Adder DV104T
Hardware Compatibility - All computers with HDMI connections - depending on requirements
Resolutions - 480p, 720p, 1080P or WUXGA (1920x1200) at 60Hz and 24-bit color depth.
Not compatible with HDCP
Software Compatibility - All known operating systems
Audio - HDMI audio channels with sample sizes of 16, 20, or 24 bits at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz.
Connections - 2x HDMI type A male, 4x CATx for link outputs, 1x 10/100Base-TX network port (config), 1x 9-way RS232C D-sub port, 2.5mm DC socket.
Operating Temperature - 0 to 40ºC / 32 to 104ºF
Dimensions - 11.5cm/4.5'' (width) x 11.4cm/4.5''(depth) x 2.6cm/1''(height).
Weight - 440g/0.97lb
Power - 3-pin socket (power adapter included), 100-240VAC 50/60Hz, 0.8A, input to power adapter. 12VDC 18W power adapter output.
Approvals - CE, FCC