Tilta Nucleus-M 3 Channel Wireless Lens Control - Kit 5

Tilta Nucleus-M 3 Channel Wireless Lens Control - Kit 5

TIL-WLC-T03-K5

Tilta Nucleus M. Partial kit. 3-channel wireless lens control system. Full control of focus, iris and wide-range zoom wirelessly.
 

Tilta - Avacab official Tilta distributor - All Tilta products in Avacab
Authorized Dealer
€1,237.00 Tax excluded
1.496,77 € Con IVA
Quantity
En Stock

Tilta - Avacab official Tilta distributor - All Tilta products in Avacab
Authorized Dealer

 

 

 

 
Tilta Nucleus-M is a highly customisable 3-channel wireless lens control system. It allows you to have full control of focus, iris and zoom on the FIZ handheld unit or between the two wireless handgrips. You can even split control of the channels between the handheld unit and the wireless handgrips as desired at the touch of a button.

 
The wireless range of both the handheld unit and the grips is 300m. This makes it ideal for drone or car shots. Each motor has its own built-in motor that communicates directly with the hand unit and grips. This eliminates the need to mount a separate MDR on your rig, allowing for a more compact camera setup and faster set-up time. Place the motors and handheld unit/grips on the same channel and you have full control. The motors allow for automatic lens calibration, as well as manual calibration if using lenses that do not have hard end stops at near focus and infinity.

 
The motors are designed to fix on 19mm or 15mm rods. Each motor has a 0.8 mod, 35-tooth, 32-step gear, which is the standard gear size for cine lenses. To power the motors, it is only necessary to use a power port on the camera equipment. Just connect the P-tap power cable to one of the motors and then daisy-chain the power to the rest of the motors with the short 7-pin to 7-pin cables. The handheld unit and grips are each powered by two 18650 rechargeable batteries (batteries NOT included). When fully charged, the batteries in the handgrips last up to 2 days, while in the handheld unit they last up to 10 hours.

KIT contents

  • Left wireless handle
    • (1) Finger wheel
  • (1) Right wireless handle
    • (1) Finger wheel
    • (1) Zoom toggle
  • (1) Brushless wireless motor with 19mm rod support and 15mm rod bushings
  • (1) 55cm 7-pin to 7-pin motor connection cable
  • (1) Photographic Lens Follow Focus Adapter
  • (1) 74cm 7-pin to P-tap motor power cable
  • (1) Hand Grip to Arri Standard Rosette Adapters
  • (1) Wireless FIZ hand unit strap
  • (1) 18650 quad battery charger (batteries NOT included)

 
Wireless control Tilta Nucleus-M features

Weight:

  • FIZ Hand Unit (no batteries): 0.972 lbs
  • Right Handle Grip (no batteries or adapters): 0.582 lbs
  • Left Handle Grip (no batteries or adapters): 0.529 lbs
  • Arri Rosette Male to Handle Grip Adapter: 0.161 lbs
  • Gimbal to Hand Grip Adapter: 0.099 lbs
  • Motor: 0.496 lbs
Motor Dimensions:

  • Length/Height: 11.43cm
  • Width: 8.26cm (end to end furthest points)
  • Depth: 1.59cm (rod mount section), 1.91cm (base section), 3.49cm (motor section)
Color: Gunmetal gray

Material: Aluminum-alloy, stainless steel, ABS plastic, rubber, Brazilian rosewood

 

You might also like

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password