• On sale!
Magewell USB Capture AIO - Analog and digital USB capture device

Magewell USB Capture AIO - Analog and digital USB capture device

MAG-32110

Record or stream an SDI, VGA or DVI-I/HDMI signal via USB 3.1 with the Magewell USB Capture AIO. With its BNC SDI, DB-9 VGA and DVI-I inputs, it supports resolutions up to 2048x2160. To stream or record at a given resolution, the USB Capture AIO will internally convert the input to the target resolution. It can convert the frame rate and de-interlace in real time with its own hardware, eliminating CPU load.

Since the USB Capture AIO uses your computer's drivers, it will work with any software that supports those drivers. If you don't have a USB 3.1 port, it will work with a USB 2.0 port, although resolution and frame rate will be reduced due to restricted bandwidth. With the included multi-connector cable, you can input HDMI 1.4a video through the DVI input. Includes DVI to VGA connector, USB cable and DB9 to YC/composite/analog audio breakout cable.
 

Magewell - Avacab distribuidor oficial Magewell - Todos los productos Magewell en Avacab
Official Dealer
€504.00 Tax excluded
609,84 € Con IVA
-stock
Quantity
En Stock

Magewell - Avacab distribuidor oficial Magewell - Todos los productos Magewell en Avacab
Avacab Official Dealer


 
 
 
  

External USB 3.0 capture card. This card allows to capture video signals by DVI and SDI, in addition it is possible through converter cables including capture signals VGA, HDMI, Composite Video, Component Video and S-Video. Resolutions up to 2048x2160 are supported.

  

logo-garantia-3

logo rohs

Data sheet

Video Inputs
Components
Composite
DVI
HDMI
SDI
VGA
Y/C
Outputs
USB
Max. Video Resolution
625i / 525i - SD
1280x720 - HD
1920x1080 - HD
2048x1080 - 2K
Max. VESA Resolution
1024x768 XGA
1152x864 - XGA+
1280x768 - WXGA
1360x768 - WXGA
1366x768 - WXGA
1400x1050 - SXGA+
1600x1200 - UXGA
1920x1200 - WUXGA
2048x1152 - QWXGA
2048x1536 - QXGA
Entradas Audio
No Balanceado
Data and Control
USB
Magewell - Avacab distribuidor oficial Magewell - Todos los productos Magewell en Avacab
Avacab Official Dealer



 
  

Supported OS

  • Windows
    • Windows 7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64)
  • Linux (support x86, x64 & ARM architecture)
    • Ubuntu 12.04/14.04/16.04/17.04/17.10/18.04 (x86 & x64)
    • CentOS 6.5/7 (x86 & x64)
    • Fedora 25/26/27 (x86 & x64)
    • Red hat 6.5 and above (x86 & x64)
    • Other Linux OS with kernel version 2.6.35 and above
  • Mac
    • OS X 10.9/10.10/10.11
    • macOS 10.12 and above
  • Chrome OS


Recommended OS (tested)

  • Windows
    • Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2 DataCenter/Server 2016 R2 DataCenter (x86 & x64)
  • Linux
    • Ubuntu 12.04/14.04/16.04 (x86 & x64)
    • Ubuntu 17.04/17.10/18.04 (x64)
    • CentOS 6.5/7.2 (x86 & x64)
    • Fedora 25/26 (x64)
    • Red hat 6.5 (x86 & x64)
  • Mac
    • OS X 10.9.5/10.10/10.11.2/10.11.3/10.11.4
    • macOS 10.12/10.13.2/10.13.3/10.14.3/10.15


Supported APIs

  • Windows
    • DirectShow
    • Wave API/DirectSound/WASAPI
  • Linux
    • V4L2
    • ALSA
  • macOS
    • AVCaptureSession
    • AudioUnit


Supported Software

  • VLC
  • VirtualDub
  • OBS
  • XSplit
  • vMix
  • VidBlaster
  • Wirecast
  • Microsoft Media Encoder
  • Adobe Flash Media Encoder
  • Any other DirectShow/V4L2/AVCaptureSession based encoding or streaming software


Input Interfaces

  • DVI-I
    • DVI 1.0
    • HDMI 1.4a (via breakout cable)
    • VGA (via DVI-to-VGA convertor)
    • Component (via breakout cable)
  • DB9
    • YC (S-Video)
    • Composite video
    • Analog audio (L+R)
    • Component video
  • BNC
    • SD/HD/3G SDI


Host Interface

  • USB 3.0
    • compatible with USB 2.0
    • compatible with USB 3.1 Gen 1


Input features

  • Auto scan of video input sources when there is no signal input to the currently selected input source
  • Manual selection of video input source
  • Auto selection of linked (embedded) audio input source when the video input source changes
  • Manual selection of audio input source
  • Support for input video resolutions up to 2048x2160


VGA & Component Specific Features

  • 12-bit ADC
  • Support for RGB & YCbCr (YUV) color formats
  • Support for ‘Separated sync’, ‘Composite sync’, ‘Sync-on-green’ (SOG), ‘Sync-on-luminance’ (SOY)
  • Support for DMT, CEA, CVT, GTF video timings
  • Input signals up to 165MHz pixel rate are digitized with 1:1 sampling
  • Input signals over 165MHz pixel rate can be digitized with horizontal sub-sampling (resulting in some image quality loss - NOT recommended)
  • Auto detection of RGB & YCbCr color formats
  • Auto or manual sampling phase adjustment
  • Auto horizontal alignment
  • Support for customized video timings
  • Support for customized video resolutions for CVT/GTF timings


HDMI Specific Features

  • 225MHz HDMI receiver
  • Adaptive HDMI equalizer support for cables lengths up to 30M
  • Support for customized EDID
  • Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
  • Full colorimetry support
  • Support for 8/10/12-bit color depths
  • Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
  • Support for up to 2-channel IEC60958 audio streams
  • Support for extraction of audio formation information & channel status data
  • Support for extraction of video timing information
  • Support for extraction of 3D format information
  • Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.


SDI Specific Features

  • Integrated cable equalizer extending the cable length as follows:
    • up to 330m for SD-SDI signals
    • up to 190m for HD-SDI signals
    • up to 150m for 3G-SDI signals
  • Support for SD/HD/3Ga/3Gb/3Gb-DL/3Gb-DS standards
  • Support for 2K (2048x1080) mode
  • Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
  • Support for 10/12-bit color depth
  • Support for extraction of SMPTE 352 payload identifier
  • Support for up to 2 (mono) audio channels at 48KHz
  • Support for extraction of audio formation information & channel status data
  • Limited support of 3Gb-DS: only the first stream can be captured
  • Limited support for capture of the first link of dual link interfaces:
    • YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
    • YCbCr 4:4:4 10-bit: captured as 4:2:2
    • RGB 4:4:4: R/B sub-sampled


YC & Composite Specific Features

  • 12-bit ADC
  • Support for NTSC, PAL, SECAM standards
  • Auto detection of the standard of input signal


Video Capture format

  • Support for capture resolutions up to 2048x2160
  • Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency. Typical capture frame rates on the Intel USB3.0 controller are as follows.)
    • 1920x1080 YUY2 (up to 75fps)
    • 1920x1080 RGB24 (up to 60fps)
  • Support for 4:2:2 8-bit capture format: YUY2, UYVY
  • Support for 4:4:4 8-bit capture format: RGB24, RGB32
  • The default capture format is YUY2. More capture formats can be set using USB Capture Utility.


Video Processing Features

  • Video processing pipelines with 160 Mpixels/s processing bandwidth
  • Video cropping
  • Video scaling
  • Video de-interlacing
    • Weave
    • Blend top & bottom field
    • Top field only
    • Bottom field only
  • Video aspect ratio conversion
    • Auto or manual selection of input aspect ratio
    • Auto or manual selection of capture aspect ratio
    • Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
  • Video color format conversion
    • Auto or manual selection of input color format & quantization range
    • Auto or manual selection of capture color format, quantization range & saturation range
    • Support for RGB, YCbCr 601, YCbCr 709 color formats
    • Support for Limited or Full quantization range
    • Support for Limited, Full & ‘Extended gamut’ saturation range
  • Video frame rate conversion
  • Vertical flip and mirror


Multiple devices on one computer

  • Support for connecting multiple USB devices to one system
  • Support for setting the device serial number as the device name shown in the system using USB Capture Utility


SDK

  • The USB Capture SDK provide functions including signal status extraction, capture configuration and real-time audio & video capture, etc.


Firmware Upgrade

  • Multiple devices in one system can be upgraded simultaneously


LED Indicator

  • Status LEDs indicate the working state of each channel:
    • Pulsing slowly: idle
    • On: input signal locked
    • Off: input signal unlocked
    • Double blinks: memory failed or FPGA configuration failed


Form Factor

  • 98mm (L) x 98mm (W) x 25mm (H)


Accessories

  • USB 3.0 cable
  • DVI to VGA connector
  • DVI-I to HDMI + Component breakout
  • DB9 to YC + Composite + Analog Audio + Component breakout


Power Consumption

  • 5V max current: ~1 A
  • max power consumption: ~5 W


Working Environment

  • Operating temperature: 0 to 45 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative Humidity: 5% to 90% non-condensing

  

close Shopping Cart

New Account Register

Already have an account?
Log in instead Or Reset password