Gefen EXT-DP-4K600-1SC DisplayPort 1.2 extender over fiber
DisplayPort 1.2 extender over OM3 fiber with SC connector. Supports up to 4K/60Hz 4:4:4 (600MHz). Up to 200m. HDCP 2.2 and 1.4, DPCP compatible
The Gefen EXT-DP-4K600-1SC is a fiber optic extender for DisplayPort 1.2. It is a compact, high-performance solution for extending HDCP 2.2, HDCP 1.4 and DPCP audio/video to displayPort 600 MHz 4K over fiber optics. The AV signal can be extended up to 200m (660ft) via a single cable with SC 50/125µm OM3 terminals via multimode fiber optic cable. There is complete electrical isolation between transmitter and receiver, which meets the stringent safety and electromagnetic compatibility requirements for critical applications. When used with the Gefen EXTPS52AU-M-1.3-6-AL power supply unit (available separately), this extender complies with medical safety and EMC EN 60601-1 and EN 60601-1-2 standards. The EXT-DP-4K600-1SC can be powered from USB-powered sources and displays or via external power supplies.
For most applications, the Transmitter and Receiver are plug-and-play and will work without any configuration. In cases where signal optimization is necessary due to the special requirements of a source and/or display, both units have easy-to-use equalization switches. The EXT-DP-4K600- 1SC supports popular and useful DisplayPort technologies such as Multi-streaming (connection of multiple displays daisy-chained to a DisplayPort output) and Auxiliary Channel (data transport and controls along with the AV signal).
Compact cabinets are easy to install and can be concealed. Its robust metal enclosures help provide greater immunity to electromagnetic interference (EMI) and radiated noise (RFI). Applications include medical imaging, military and industrial command and control rooms, military and industrial control rooms, flight simulators, digital signage, games and wherever uncompressed 4K full-bandwidth video or end-to-end electrical isolation is essential.
Video support: Supports resolutions up to WQUXGA (3840x2400), 4K Ultra HD (3840x2160) and 4K Cinema - DCI (4096x2160), with frame rate up to 60Hz and Chroma 4:4:4 sub-sampling.
Gefen EXT-DP-4K600-1SC extender features
- Compatible with full bandwidth 4K 60Hz 4:4:4 (600MHz) full bandwidth.
- Fully compatible with DisplayPort 1.2 standard.
- Supports WQUXGA (4K; 3840x2400), 4K Ultra HD (3840x2160), and 4K Cinema - DCI (4096x2160) at 60Hz, 4:4:4.
- Extension up to 200m (660ft) over an OM3 (50/125um) multi-mode optical cable with SC connection or better.
- Compatible with HDCP 2.2, HDCP 1.4 and DPCP.
- Support DisplayPort Auxiliary/l²C Channel.
- Supports DisplayPort Multi-stream technology.
- The compact chassis is easy to install and can be concealed.
- The sturdy metal construction of the chassis helps to provide greater immunity against electromagnetic interference (EMI) and radiation noise (RFI).
- Plug & Play - no setup or set-up required for most applications.
- EQ switches on the Transmitter and Receiver ensure compatibility with most sources and displays.
- Medical safety (EN 60601-1) and EMC compliant (EN 60601-1-2) when used with two EXT-PS52AU-M-1.3-6-AL power supplies (available separately).
Data sheet
- Video Inputs
- DisplayPort
- Outputs
- DisplayPort
- Max. Video Resolution
- 625i / 525i - SD
1280x720 - HD
1920x1080 - HD
2048x1080 - 2K
3840x2160 - UHD
4096x2160 - 4K DCI - Max. VESA Resolution
- 800x600 - SVGA
1024x768 XGA
1280x1024 - SXGA
1366x768 - WXGA
1400x1050 - SXGA+
1600x1200 - UXGA
2048x1152 - QWXGA
2560x1600 - WQXGA - Power
- DC
- Range
- 200 m
Video Bandwidth | 21.6 Gbps (5.4 Gbps per lane, 4 lanes) |
Video Input connector (Sender) | (1) DP-20-pin, female |
Video Output connector (Receiver) | (1) DP-20-pin, female |
Link connector (Sender/Receiver) | (1) Type SC |
Link Indicator (Sender/Receiver) | (1) LED, green |
Power Supply connector (Sender/Receiver) | (1) 5V DC 3.5mm/1.3mm barrel jack |
Power Consumption | Sender: 1.75W Receiver: 2.0W |
Optical Power Budget | 6.5 dB |
Operating Temperature | +32 to +122 °F (0 to +50°C) |
Operating Humidity | 10% to 85% RH, non-condensing |
Storage Temperature | -4 to +158 °F (-20 to +70 °C) |
Storage Humidity | 10% to 85% RH, non-condensing |
Dimensions (W x H x D, Sender/Receiver) | 1-3/4" x 7/8" x 3-1/8" (45mm x 22mm x 79mm) |
Net Weight (Sender/Receiver) | 4.8 oz. (0.135 kg) each |
Shipping Weight | 2.5 lbs. Â (1.2 kg) |