The Magewell Pro Convert AES67 audio interface allows you to use your trusted analogue audio equipment - compressors, equalisers or analogue power amplifiers - and adapt them to the world of audio networks. The Pro Convert AES67 processes the reception and transmission of digital data to and from analogue devices. The Pro Convert range is ultra-compact, making it ideal for use in the studio or for portable use in the field. Value-added features for live production applications include WebUI for remote control, a ¼-20 thread for accessory mounting, effective transmission of line audio using NDI, SRT, or Icecast and native AES67 audio over IP. The units can be powered via a DC adapter or via Power over Ethernet (PoE) for ease of deployment.
 |
| Official Dealer |
Magewell Pro Convert AES67 - Analogue Audio Interface to AES67 NDI and SRT
MAG-64240
The Magewell Pro Convert AES67 audio interface allows you to use your trusted analogue audio equipment - compressors, equalisers or analogue power amplifiers - and adapt them to the world of audio networks. The Pro Convert AES67 processes the reception and transmission of digital data to and from analogue devices. The Pro Convert range is ultra-compact, making it ideal for use in the studio or for portable use in the field. Value-added features for live production applications include WebUI for remote control, a ¼-20 thread for accessory mounting, effective transmission of line audio using NDI, SRT, or Icecast and native AES67 audio over IP. The units can be powered via a DC adapter or via Power over Ethernet (PoE) for ease of deployment.
|
| Official Dealer |
€369.00
Tax excluded
446,49 €
Con IVA
|
| Avacab Official Dealer |
The Magewell Pro Convert AES67 audio interfaces allow you to use your trusted analogue audio equipment - compressors, equalisers or analogue power amplifiers - and adapt them to the world of audio networking. The Pro Convert AES67 processes the reception and transmission of digital data to and from analogue devices. The Pro Convert range is ultra-compact, making it ideal for use in the studio or for portable use in the field. Value-added features for live production applications include WebUI for remote control, a ¼-20 thread for accessory mounting, effective transmission of line audio using NDI, SRT, or Icecast and native AES67 audio over IP. The units can be powered via a DC adapter or via Power over Ethernet (PoE) for simplicity of deployment.
Magewell Pro Convert AES67 Converter key features
- Compatible with ST 2110-30
- 3.5mm unbalanced / 4.4mm balanced / USB Audio Class / Icecast / AES67 / NDI / SRT / Icecast / AES67 / NDI / SRT input and output
- Nanosecond precision timing synchronisation is provided using IEEE 1588-2008 Precision Timing Protocol (PTP) version 2 (PTPv2).
- Embedded A/D and D/A audio converters
- Remote management via Magewell cloud and web user interface
- Compatible with a wide variety of TCP/IP devices, including PC and audio processing software
- Dual power input options, powered by the Network Switch via Ethernet (PoE), a PoE injector (802.3 af) or DC 5V via MicroUSB connector
Web interface configuration
The Pro Convert AES67 can be controlled via a web-based user interface. With the Web UI, you can monitor device operating status, input signal status and configure settings for your sessions.
- Check the status of the device, audio, streaming, Ethernet and much more.
- Global settings (parameter configuration)
- PTP configuration
- Stream (NDI, SRT, Icecast TX/RX sessions)
- Audio Matrix tab - Switching matrix to selectively connect incoming signals to the desired output paths.
Audio routing matrix
- Output up to 22 channels and input up to 46 channels.
- Route any of the inputs to any of the outputs. Each channel of these outputs is completely independent and isolated from the others.
- The 46 x 22 cross performance audio matrix offers routing, mixing and volume adjustment functions for the inputs and outputs.
Multiple IP-based formats
Magewell Pro Convert AES67 is capable of serving IP-based formats such as Native AES67, SMPTE ST 2110-30 and Dante AES67.
Data sheet
- Entradas Audio
- Balanceado
Dante - Salidas Audio
- Dante
No Balanceado
|
| Avacab Official Dealer |
Receiving/Input Features
- Support for sample rates of 96/48/44.1 KHz, and 16/24bit sample depth
- 1 x 2-channel 3.5mm TRS unbalanced in (5k Ohm)
- 1 x 2-channel 4.4mm TRRRS balanced in (20k Ohm)
- 1 x 4-channel 24-bit/48k USB Audio Class in
- Receiving 4 x 8-channel 24-bit AES67 (compatible with SMPTE ST 2110–30) streams both multicasted and unicasted
- Receiving 1 x 4-channel 24-bit Network audio stream with Icecast, SRT, or NDI protocol, via Ethernet
- Frequency Response 20Hz ~ 20kHz (-/+0.5dB)
- Dynamic range > 100dB
- Signal to noise ratio > 100dB
- Total harmonic distortion < 0.01% @ +4dBu
- Support for PTP master/slave
- Max signal level: unbalanced at 12dBu, balanced at 24dBu
- Device buffer at 0.125 ~ 64 ms (controlled via WebUI, 1 to 16 packets with packet time at 0.125/0.25/0.333/1/4 ms)
Sending/Output Features
- Support for sample rates of 96/48/44.1 KHz, and 16/24bit sample depth
- 1 x 2-channel 3.5mm TRS unbalanced out (10 Ohm)
- 1 x 2-channel 4.4mm TRRRS balanced out (150 Ohm)
- 1 x 4-channel 24-bit/48k UAC out
- Multicast (IGMPv2) and unicast up to 8 x 8-channel 24-bit AES67 (SMPTE ST 2110–30 compliant) streams
- Encoding and transmitting 1 x 4-channel 24-bit audio stream with Icecast, SRT, or NDI protocol
- Support for PTP master/slave
- Total harmonic distortion < 0.01% @ +4dBu
- Frequency Response 20Hz ~ 20kHz (-/+0.5dB)
- Dynamic range > 100dB
- Signal to noise ratio > 100dB
- Max signal level: unbalanced at 12dBu, balanced at 18dBu
Configuration Management
- Registration with Magewell Cloud
- Remote control via WebUI and Magewell Cloud
- Provision of comprehensive information regarding the device and signals in real-time
- Configuration of how an input is processed and encoded, including sampling, packets, PTPv2(IEEE 1588–2008), channel adjustment, audio mixing, buffer, as well as the network connection
- Support for updating firmware
- Support for USB RNDIS/ECM
- Support for IE/Edge/Firefox/Chrome/Safari/Opera web browsers
- Provision of HTTP APIs
Interfaces
- 10/100/1000Mbps with PoE (IEEE 802.3af)
- USB2.0 Type B
- 5V/2.1A power supply
- USB NET
- 3.5mm TRS unbalanced IN/OUT
- 4.4mm TRRRS balanced IN/OUT
LED Indicators
- Power LED indications:
- on: power on
- off: power off
- PTP LED indications:
- on: synced
- off: not synced
- blinking: syncing
Form Factor
- 100.9smm (L) x 60.2mm (W) x 23.3mm (H)
Accessories
- 4.4mm to Dual XLR Male Cable
- 4.4mm to Dual XLR Female Cable
- USB 2.0 cable (Type A to Type B)
- Universal power adapter
- L bracket
On-board Control Buttons
- 16 Position Rotary DIP Switch: sets board-index from 0 to F
Screw Mounting Hole
- ¼–20 threaded hole
Power Consumption
- 5V max current: ~ 1 A
- Max power consumption: ~ 5 W
Working Environment
- Operating temperature: 0 to 40 deg C
- Storage temperature: –20 to 70 deg C
- Relative humidity: 5% to 90% non-condensing