Blustream DA11AEN Analogue Audio to Dante Encoder
BLS-DA11AEN
The Blustream DA11AEN is designed to encode 2 channels of balanced or unbalanced analogue audio to digital signal under the Dante audio protocol. The DA11AEN allows any non-Dante analogue audio source, such as the output of mixing consoles, amplifiers, computers or distribution products, to be connected as a source within a Dante network.
The DA11AEN is a Plug&Play device that is powered via PoE (Power over Ethernet) from any PoE network switch or via a local 12V power supply input (sold separately).
The DA11AEN also supports AES67 RTP audio transport with independent sensitivity adjustment for each channel as required.
€225.00
Tax excluded
272,25 €
Con IVA
The Blustream DA11AEN is designed to encode 2 channels of balanced or unbalanced analogue audio to digital signal under the Dante audio protocol. The DA11AEN allows any non-Dante analogue audio source, such as the output of mixing consoles, amplifiers, computers or distribution products, to be connected as a source within a Dante network.
The DA11AEN is a Plug&Play device that is powered via PoE (Power over Ethernet) from any PoE network switch or via a local 12V power input (sold separately).
The DA11AEN also supports AES67 RTP audio transport with independent sensitivity adjustment for each channel as required.
Dante Blustream DA11AEN Encoder features
- Encodes balanced or unbalanced 2-channel analogue audio into a Dante digital signal
- Supports 44.1, 48 and 96 KHz @ 24 Bit sampling rates
- Configurable Dante® device latency (supports 1, 2 or 5 ms configurable via Dante® Controller)
- Independent input sensitivity control per channel: +24dBu to -10dBV
- Supports AES67 RTP audio transport
- 802.3af Class 1 PoE available to power the product from any PoE switch
Data sheet
- Protocols
- AES67
Dante - Entradas Audio
- Balanceado
No Balanceado - Salidas Audio
- Dante
- Power
- DC
PoE